[ROOT] Rooting E/F on latest firmwares

[robert90]

Now i need to get the OSCAM working can somebody point me where to start?

http://tanjasoft.com/how-to/install-osc ... -series-h/

Here you will find a manual and the necessary files. Costs a few euros , but works very well.

[stefan81]

Hi, i have a problem to install samygo on my F6500 Tv, i hope anyone can help me. I know that i don't update my TV firmware if samygo is installed on tv.
But i did it, because i had a problem with smart hub. Now i haven't problems with smart hub anymore, but i have now the problem, samygo does not work anymore.
I can install samy go on new firmware but it doesn't run. What can i do? Are there old samygo data on TV because new installation does not work? Helps to Reset the Tv on service men? ?
Now runs samy go never because I have made a firmware update? My Firmware is 2111. I have tried different usb sticks too, OTN is off, Lan Cable ok, fat format, fat32 format.

[sectroyer]

Hi, i have a problem to install samygo on my F6500 Tv, i hope anyone can help me. I know that i don't update my TV firmware if samygo is installed on tv.
But i did it, because i had a problem with smart hub. Now i haven't problems with smart hub anymore, but i have now the problem, samygo does not work anymore.
I can install samy go on new firmware but it doesn't run. What can i do? Are there old samygo data on TV because new installation does not work? Helps to Reset the Tv on service men? ?
Now runs samy go never because I have made a firmware update? My Firmware is 2111. I have tried different usb sticks too, OTN is off, Lan Cable ok, fat format, fat32 format.

Well I can tell you that prices of chickens went up Not sure about pork Let me know if you need any more info since obviously you do NOT want help with rooting since you did NOT read first post and/or did NOT follow instructions

[stefan81]

I'm sorry but my english is not very good I've probably misunderstood something.
I've actually tried everything like the 1st thread described but I do not get to run.
With the modified run.sh unfortunately no file is written to the stick.

20150909_180234.jpg

On the stick just a .cm00013 file is written
Is there because I did the firmware update is now no possibility more Samygo to get started?

Samy go is now even when I started the debug2 recopied and there was a log be created:

sam.log

Unfortunately after another reboot no longer functional

[sectroyer]

I'm sorry but my english is not very good I've probably misunderstood something.
I've actually tried everything like the 1st thread described but I do not get to run.
With the modified run.sh unfortunately no file is written to the stick.

20150909_180234.jpg

On the stick just a .cm00013 file is written
Is there because I did the firmware update is now no possibility more Samygo to get started?

Samy go is now even when I started the debug2 recopied and there was a log be created:

sam.log

Unfortunately after another reboot no longer functional

Well the log looks like you are using "wifi" Also did you check telnet on port 5023 ?

[stefan81]

No i don't use wlan i use Lan!!! I used WLAN before i root the tv first, but i switched on lan before i made the root. Port 5023 don't work. When i root again,should i use the USB flash drive reformat and copy the 2 Folders on stick again, or can i use the old file system on stick?

[sectroyer]

No i don't use wlan i use Lan!!! I used WLAN before i root the tv first, but i switched on lan before i made the root. Port 5023 don't work. When i root again,should i use the USB flash drive reformat and copy the 2 Folders on stick again, or can i use the old file system on stick?

Best is to use FAT formatted usb And if you change "sleep" and it stops working in 99.99% cases it means you are editing file incorrectly. If you "break" such it will NEVER work

[stefan81]

I don't have edit "sleep" because i have no ftp access to edit this!!! Or is this possible to edit on USB Stick?

[zoelechat]

If no root at all, try to replace SamyGO-F-SM-MST-Fix/data/data.zip by this one on USB. This file already includes 'sleep 120' before autostart, so restart rooting procedure and wait at least 3-4 minutes before checking root.

You didn't read until the end, that's bad

[RebornID]

Make your Usb Stick new, with a small partition 1GB.
Sleep can you add in the "rcSGO"-File direct on your USB Stick. (Find File here: SamyGO-F-SM-MST-Fix -> data -> data.zip -> SamyGO)