SamyGO

Ok thank you i try it. Question: The Files libsamy.zip, debug and debug 2 from the first posts why does i need them? I can't read it in the instructions from the first post

Follow only the Instructions in the First Post. Don't care about the other Files.

I Summary:

- Small Partition and try
if it not run
- Small Partition + Sleep 120 and try
if it not run
- Reset the Smarthub and make a Factury Reset over Service Menu (don't forget to the OTN to off, after that), try again to root
if it not run

If still no root, replace run.sh in USB SamyGO_data folder by the one from this archive, restart TV, wait a while and paste here sam.log you might find in SamyGO_data.

robert90 wrote:

majklcze wrote:Now i need to get the OSCAM working can somebody point me where to start?

http://tanjasoft.com/how-to/install-osc ... -series-h/

Here you will find a manual and the necessary files. Costs a few euros , but works very well.

Wow, i get it work! Now i need to set up the Oscam as Newcamd client any info?

majklcze wrote:Wow, i get it work! Now i need to set up the Oscam as Newcamd client any info?

Possible, but certainly not in rooting thread

Hi, i have tried the instructions of rebornid.
The problem is once I get root and this is after the reboot again inactive or no longer starts .
I have tried everything from the first post and instructions of rebornid sleep 30,120 but dont't start.
run.sh and sam.log does not work well.
After several resets from TV and Smart Hub, it is lucky if samygo after hours 1 start times.
I did it again managed that samygo starts and now I do not reboot. I have now ftp access, Can anyone help now to locate the error?

--- I test this: i restarted the tv if ftp and samy runs with "reboot" in putty telnet!!!! Every reboot the root works with ftp and telnet !!! But i try to start the tv with on/off by remote contol and samy go dont' t work anymore! What is the problem? I don't know!?

I could the last time started as samygo the logs back up!
Maybe someone can help?

stefan81 wrote:I could the last time started as samygo the logs back up!
Maybe someone can help?

Logs samy.rar

Well your log shows some OTN stuff Isn't OTN Support disabled ASAP ?

Yes, OTN Support is in the Service Men? OFF.

stefan81 wrote:Yes, OTN Support is in the Service Men? OFF.

20150911_181411.jpg

20150911_175905.jpg

I would try different usb. Root IS working. You can check it by trying telnet on port 5023. As described already in first post

Joejoe wrote:...
- Change execute permision:

Code: Select all

chmod +x /mtd_rwcommon/SamyGO/rcSGO

- execute rcSGO with this line:

Code: Select all

/bin/sh -c "/bin/sh /mtd_rwcommon/SamyGO/rcSGO &" &

- waiting for 5 minutes -> nothing happens
- execute rcSGO with this line:

Code: Select all

/bin/sh -c "/bin/sh /mtd_rwcommon/SamyGO/rcSGO" &

- waiting for 5 minutes -> nothing happens
- don't know why but I try a reboot
- after approximately 1 min my virtual USB appears I could not believe my eyes
...
Greetz Joe

I had the same problem. If you have telnet access, try using above mentioned commands.
I also had to change sleep time to 30 in the rcsgo file over ftp (path: mtd_rwcommon/SamyGO/rcSGO).

After reboot it worked for me.
You can see that it is ready when virt.usb appears in your sources.