SamyGO

Hurra!!!

thank you zoelechat the last hint with the mix work!!!

now I only have to install the oscam. update: oscam works perfect!!!!

thank you again

A.

My tv find the stick but i dont have SamyGo on Smathub. whats going wrong?

1ST POST wrote:If ever you encounter problems on step to make installation widget appear in Smarthub, here's a report collection:

* Reboot the tv and don't plug the usb drive.
* Open Smart Hub > Apps > More Apps and then put the usb drive and exit from the screen for new device found.
* SamyGO -F widget will appears after that.

finally, i managed to install samygo. after 5 or more attemps the app appeared under "more apps".

The installation widget only shows up when plugging flash usb drive under more apps section.

Biggest hangup seemed to be getting the app to appear in the smarthub. Took several unplug/re-plug cycles while viewing the "more apps" section before the widget appeared.

It should appear automatically after inserting the USB (exit the usb pop-up first) but sometimes you need to exit out of the smarthub and go back for it to get loaded in the smarthub more apps menu.

The "trick" is to let the "New device" screen time out.

I finaly installt SamyGo .What Software I Need to conect to the tv ? I use the donors route metode on a ue46f7090
now I found out how to use ftp to acces the tv. Now i need to know how i use that green Code and what is Telnet?

Hi. I have tv UE46EH5300 with software: T-MST10PDEUC-2005.0 I have disable otn
Now for root tv i follow this guide:

For MST do this:

Unpack SamyGO-F-SM-MST-Fix-USB to FAT USB
Now you should have FAT USB with two folders: SamyGO-F-SM-MST-Fix and SamyGO_data
Connect USB to TV
Launch SamyGO-F-SM-MST-Fix from SmartHub (if it doesn't appear reboot TV). Sometimes it is necessary to connect USB WHILE TV IS OFF!!!
The widget will automatically finish installation (No need to push any buttons).
When it finishes it will ask to reboot TV.
Reboot TV and wait 1-2 minutes.
Now SamyGO is started and telnet/ftp/etc. should work.

or I follow this guide:

For E SERIES!!!! do this:

Unpack attached SamyGO_data_E.zip to FAT USB
Download 128mb.xfs from: https://www.sendspace.com/file/el3xm8 or get it from /data folder of this archive
Copy file 128mb.xfs to folder SamyGO_data on FAT USB
Unpack SamyGO-F-SM-AutoStart-USB to FAT USB
Now you should have FAT USB with two folders: SamyGO-F and SamyGO_data
Connect USB to TV
Launch SamyGO-F from SmartHub (if it doesn't appear after TV reboot). Sometimes it is necessary to connect USB WHILE TV IS OFF!!!
The widget will automatically finish installation (No need to push any buttons) and close itself
Now SamyGO is started and telnet/ftp/etc. should work.
If ever installation widget restarts endlessly: Leave your SamyGO_data as it is but put there some (any) file named samyext4.img and try F-MST method. It might help.
To enable AutoStart reboot TV and from Main Menu -> Smart Features -> Apps Settings -> Auto Ticker -> SamyGO_AutoStart

I don't understand difference...What is difference?

You have E-MST so follow instructions for E-MST. Simple as that, no need to try to "read between lines".

1ST POST wrote:*E-MST users, better go there.

zoelechat wrote:You have E-MST so follow instructions for E-MST. Simple as that, no need to try to "read between lines".

1ST POST wrote:*E-MST users, better go there.

Hi my firmware is 2005.0 but here: users, better go there root method is for firmware 2004.1 it works the sames?

Yes!
Editing title...