Page 17 of 18
Re: [How-To] Rollback on old FW...
Posted: Fri Apr 01, 2011 5:30 am
by juusso
you`ve surprised me (in bad meaning).
I think, you bricked TV because:
either:
- you used not the latest version of FFB (versions under 0.5) and you used wrong images (from other TV models) to restore
or:
- You used patched firmware and you got some errors during patching process. If you ignored errors and flashed it - it could cause TV brick.
Here are a lot of safety checks in FFB and flashing images from other models is (almost) impossible, just if patcher error occured.
I need all log files from USB you got. And more detail explanation what have you used and what have you did, to understand what went wrong and help you.
Re: [How-To] Rollback on old FW...
Posted: Fri Apr 01, 2011 11:18 am
by juusso
It could be, you flashed pre-patched firmware and it has errors... I hope you added files from archive [T-CHLDEUC]-u-boot.bin,[T-CHLDEUC]-fnw.bin and [T-CHLDEUC]-Image first time you used FFB? I think - yes, because you got it finished. Then prepare exlink cable, god, unpatched firmware and read a bit
this thread. It is better to wait my assistance step by step, because if you aren`t good in linux, you could brick it totaly. I think you did not read instruction, because you`ve deleted log files from usb...
I edited FFB instructions for mandatory usage of original, not patched firmware for rollback process already .
I think you red this from readme file and how-to:
Code: Select all
IF NO SUCCESS OR TV BRICKED
- TV rebots on any error during downgrade procedure ("set -e" mode for script).
- Look at _FFBlog.log, _debug.log and sysinfo.log, ask for help on samygo.tv forum:
http://forum.samygo.tv/viewtopic.php?f=2&t=1310
- After error reboot TV starts to currently active (februar) firmware.
- Try use another USB disk, download firmware from another source...
FOR TV repair you need
* ExLink cable: http://wiki.samygo.tv/index.php?title=Enable_Serial_Console_on_non_CI%2B_Devices
* Read carefully wiki articles:
http://wiki.samygo.tv/index.php?title=Recovery_of_Bricked_Device
http://wiki.samygo.tv/index.php?title=Playing_with_Firmware_Images#Decryption.2FEncrpytion_of_Image
http://wiki.samygo.tv/index.php?title=Repair_TV_from_u-boot
* Ask for help in samygo.tv forum:
http://forum.samygo.tv/viewtopic.php?f=2&t=1310
I think in your case we could just activate alternative (previous good) firmware by changing PartitionSwitch_*_* over console.
I need output from console to commands:
Code: Select all
ls -l /mtd_rwarea/PartitionSwitch*
and
and
Sure, i need an ExLink output from the start of TV.
Re: [How-To] Rollback on old FW...
Posted: Wed Apr 27, 2011 10:04 am
by juusso
Yes, you can revert to previous 3000 firmware. Your TV is CI+ and only one way is left:
ActivateAlternative firmware tool from Content library or script over telnet console.
Re: [How-To] Rollback on old FW...
Posted: Wed Apr 27, 2011 3:01 pm
by juusso
windows is ok. Format pen to fat32
Re: [How-To] Rollback on old FW...
Posted: Tue Mar 19, 2013 5:41 pm
by PiterEL
Can someone post a step by step how to upload the old firmware LE52B750U1WXXH 2005 SamyGo now having uploaded the original soft samsung T-CHL7DEUC-3001.1
I would like to be able to use additional applications samygo and most of the media viewing SAMBA. Samygo extension that fits the model LE52B750U1WXXH
Re: [How-To] Rollback on old FW...
Posted: Tue Mar 19, 2013 6:40 pm
by juusso
use FFB
