Page 18 of 44

Re: [App] ForceFirmware Back (FFB)

Posted: Sat Oct 08, 2011 4:39 pm
by juusso
Have you tried the FFB once again? Remove logs and run. If you have exlink, save debug log to file.
If you dont get success, here is a way to flash firmware directly over telnet.

More detail inspecting of logs showed, that firmware is not flashed to TV. I don`t know why. Try again and if no success, then only manual way left for you. Look at the times of start and end of procedures:

Code: Select all

[00:01:54] exe.img.enc copied to /mtd_swu/ successfully!
Start flashing to /dev/bml0/10
[00:01:54] /dev/bml0/10 restored. Deleting source...

Code: Select all

[00:01:58] appdata.img.enc copied to /mtd_swu/ successfully!
Start flashing to /dev/bml0/11
[00:01:58] /dev/bml0/11 restored. Deleting source...
i will think about the issue. It could be also NAND defect too, i saw one TV with such problem. I would like to inspect your TV over TeamViewer (and probably to flash the preFEB firmware manually for you) ;)

p.s. I just re-flashed my B653 with FFB0.6.2.1 and everything went fine:

Code: Select all

==============FFB ver. 0.6.2.1 by juuso==============
 
=====================Script start====================
 
USB found: /dtv/usb/sda1
 
 FFB operating mode is CI 
 
Found: T-CHL7DEUC firmware on USB.
 
#Check files on USB 
Content of /dtv/usb/sda1:
drwxr-xr-x   10 root     0           45056 Jan  1 00:01 .
drwxr-xr-x    3 root     0             100 Jan  1 00:00 ..
drwxrwxrwx   32 root     0            4096 Sep 28  2011 Downloads
drwxrwxrwx   11 root     0            4096 Oct  5  2011 Filmukai
drwxrwxrwx   19 root     0            4096 Mar  3  2011 Muzika
drwxrwxrwx    3 root     0            4096 Oct  8  2011 Records
drwxr-xr-x    3 root     0            4096 Oct  8  2011 T-CHL7DEUC
drwxr-xr-x    3 root     0            4096 Oct  5  2011 T-GAS6DAAC
drwxr-xr-x    3 root     0            4096 Oct  5  2011 T-GAS6DEUC
drwxrwxrwx   20 root     0            4096 Oct  1  2011 TV
-rwxr-xr-x    1 root     0             254 Jan  1 00:01 _FFBlog.log
-rwxr-xr-x    1 root     0            1410 Jan  1 00:01 _debug.log
-rwxr-xr-x    1 root     0            4184 Jan  1 00:01 _sysinfo.log
 
Content of /dtv/usb/sda1\/T-CHL7DEUC\/:
drwxr-xr-x    3 root     0            4096 Oct  8  2011 .
drwxr-xr-x   10 root     0           45056 Jan  1 00:01 ..
-r-xr-xr-x    1 root     0           11695 Aug 16  2009 MicomCtrl
-r-xr-xr-x    1 root     0           19413 Aug 16  2009 crc
-r-xr-xr-x    1 root     0           21057 Aug 16  2009 ddcmp
drwxr-xr-x    2 root     0            4096 Oct  8  2011 image
-r-xr-xr-x    1 root     0             591 Aug 16  2009 rc.local
-rwxr-xr-x    1 root     0            8169 Aug 16  2009 run.sh.enc
 
Content of /dtv/usb/sda1\/T-CHL7DEUC\/image:
drwxr-xr-x    2 root     0            4096 Oct  8  2011 .
drwxr-xr-x    3 root     0            4096 Oct  8  2011 ..
-rwxr-xr-x    1 root     0         3070432 Sep  1  2009 [T-CHL7DEUC]-Image
-rwxr-xr-x    1 root     0          178292 Oct 13  2010 [T-CHL7DEUC]-fnw.bin
-rwxr-xr-x    1 root     0          233972 Oct 13  2010 [T-CHL7DEUC]-u-boot.bin
-rwxr-xr-x    1 root     0        31522816 Apr 22  2011 appdata.img.enc
-rwxr-xr-x    1 root     0        53727232 Apr 22  2011 exe.img.enc
-rwxr-xr-x    1 root     0              18 Aug 16  2009 info.txt
-rwxr-xr-x    1 root     0               7 Aug 16  2009 serial_temp
-rwxr-xr-x    1 root     0              47 Apr 22  2011 validinfo.txt
-rwxr-xr-x    1 root     0              44 Aug 16  2009 version_info.txt
 
 
VERSION is /mtd_rwarea/Version.1
VERSION_ALT is /mtd_rwarea/Version.0
PART_FLAG is /mtd_rwarea/PartitionSwitch_1_0
PART_FLAG_ALT is /mtd_rwarea/PartitionSwitch_0_0
EXE_PART is /dev/bml0/8
APPDATA_PART is /dev/bml0/9
MAC_PART is not needed
 
Firmware on USB mach to firmware on TV. Going to upgrade...
Current script dir is . 
Firmware on USB is T-CHL7DEUC-2004.1 
Checking SamyGODecrypter...
SamyGODecrypter found!
Checking md5sum...
md5sum found!
ddcmp found on /mtd_rwarea
[00:01:32] START updating u-boot.bin
[00:01:33] END updating u-boot.bin
[00:01:36] START updating fnw.bin
[00:01:37] END updating fnw.bin
[00:01:39] START updating Image
[00:01:42] END updating Image
Firmware flashing MODE is CI 
########## Flashing exe.img (CI)##########
 
[00:01:47] exe.img.enc found on /dtv/usb/sda1, start copying...
[00:02:09] exe.img.enc copied to /mtd_swu/ successfully!
Start flashing to /dev/bml0/8
Ok....
[00:02:46] /dev/bml0/8 restored. Deleting source...
[00:02:47] exe.img.enc deleted from /mtd_swu/
 
########## Flashing appdata.img (CI)##########
 
[00:02:47] appdata.img.enc found on /dtv/usb/sda1, start copying...
[00:02:55] appdata.img.enc copied to /mtd_swu/ successfully!
Start flashing to /dev/bml0/9
Ok....
[00:03:26] /dev/bml0/9 restored. Deleting source...
[00:03:27] appdata.img.enc deleted from /mtd_swu/
 
########## Switching to alternative firmware ##########
 
/mtd_rwarea/PartitionSwitch_0_0 created.
Writing firmware ID to /mtd_rwarea/Version.0...
SWU_T-CHL7DEUC_002004_I02_ES000DS000_090816
/mtd_rwarea/Version.0 created
/mtd_rwarea/PartitionSwitch_1_0 removed.
 
 
USB update end !!!
 
========================
|Duration = 139 seconds|
========================
 
Welcome to pre-FEB world !!!
 
TV is rebooting right now. Bye :)
p.s. problem solved.

Re: [App] ForceFirmware Back (FFB)

Posted: Thu Oct 13, 2011 2:09 pm
by juusso
Yes, sure. But you have to use RSA dissabler first.
(we`re talking about ci+ model, right? I guess T-CHUCIPDEUC)

Re: [App] ForceFirmware Back (FFB)

Posted: Fri Oct 14, 2011 2:02 pm
by juusso
Hi. Thanks for reporting!
I think you should use the FFB version 0.5.9. It worked well for CI models.
Here is the link.

Re: [App] ForceFirmware Back (FFB)

Posted: Sat Oct 15, 2011 7:48 am
by juusso
Attention!
Temporary CI users please use FFB 0.5.9 version. The latest version works on CI+ devices only. To be fixed soon.

Re: [App] ForceFirmware Back (FFB)

Posted: Fri Oct 28, 2011 11:17 am
by juusso
Hi,

Get SamyGO Dump maker, make dumps of existing firmware, archive and upload to multiupload.com.
I`ll inspect and tell you what is on board...