Page 191 of 256
Re: [App] Rooting E/F on latest firmwares
Posted: Fri Jan 15, 2016 4:45 pm
by atkajs
I have manged to get root access once after using the above instructions and was able to FTP in and get directory but now each time I turn TV on it freezes after a minute or so or if you try to start smart hub it reboots.....if you take the USB stick out it will boot okay but without root access....any suggestions much appreciated ..thank you
(I have a UE 22F5410 which has latest firmware 2114.1 (T-MST12DEUC-2114.1)
Re: [App] Rooting E/F on latest firmwares
Posted: Fri Jan 15, 2016 5:46 pm
by zoelechat
Disable Watchdog from service menu
If still no luck, disable /mnt/etc/init.d/99_99_*.init scripts (rename them to .dis through FTP).
Re: [App] Rooting E/F on latest firmwares
Posted: Fri Jan 15, 2016 7:38 pm
by Stingray
sectroyer wrote:Lol this does NOT look as log from NETCAT. Please use NETCAT. Without it NO HELP
Netcat doesn't work on my win 10 maschine, i have used Nmap.
I hope that is okay
Re: [App] Rooting E/F on latest firmwares
Posted: Fri Jan 15, 2016 11:43 pm
by sectroyer
No. You downloaded Ncat. But you need NETCAT
Different program
[App] Rooting E/F on latest firmwares
Posted: Sat Jan 16, 2016 9:59 am
by jkarl
I have a similiar problem: After a few minutes my UE F6470 reboots. FTP Access is given before reboot.
Deactiveted Wachtdog freezes TV, all 99_99*.init are deactivated with .dis.
Any further hints?
Re: [App] Rooting E/F on latest firmwares
Posted: Sat Jan 16, 2016 11:11 am
by Stingray
sectroyer wrote:No. You downloaded Ncat. But you need NETCAT
Different program
that's all from netcat.
Re: [App] Rooting E/F on latest firmwares
Posted: Sat Jan 16, 2016 12:30 pm
by sectroyer
Ehh still NOT sure it's netcat and not Ncat. After connecting please run:
and press enter
Re: [App] Rooting E/F on latest firmwares
Posted: Sat Jan 16, 2016 3:39 pm
by spencer
Hi guys, i have a problem with the root of my F5500 MST v2104.
Some months ago I've done the root procedure. Everything was ok! Yesterday I was trying to enable NFS and I noticed that telnet was not working anymore. After a reset (from the main menu), I applied the root procedure (I'm a donor). I have tried all the options listed in the first post, but no lucky.
Attached is the sam.log file
Code: Select all
+ echo checking /dtv/usb/sda1
checking /dtv/usb/sda1
+ sleep 1
+ [ -e /dtv/usb/sda1/STOP_SAMYGO ]
+ cd /tmp
+ mkdir /tmp/bin
+ /mtd_exe/InfoLink/lib/unzip -o -P 12345 /mtd_rwcommon/widgets/user/SamyGO/data/data.zip -d /tmp/bin/
unzip: cannot find or open /mtd_rwcommon/widgets/user/SamyGO/data/data.zip, /mtd_rwcommon/widgets/user/SamyGO/data/data.zip.zip or /mtd_rwcommon/widgets/user/SamyGO/data/data.zip.ZIP.
+ chmod 777 /tmp/bin/*
chmod: /tmp/bin/*: No such file or directory
+ /tmp/bin/busybox --install -s /tmp/bin
/dtv/usb/sda1/SamyGO_data/run1.sh: line 15: /tmp/bin/busybox: not found
+ sync
+ export PATH=/tmp/bin:/usr/sbin:/usr/bin:/bin:/sbin:/etc/Scripts:/util:/mtd_appdata/Runtime/bin
+ export LD_LIBRARY_PATH=/tmp/bin:/mtd_cmmlib/RECOGNITION_LIB:/lib:/mtd_cmmlib/lib:/mtd_cmmlib/Comp_LIB:/mtd_exe/lib:/mtd_cmmlib/YWidget_LIB:/mtd_cmmlib/InfoLink/lib/plugin/Static:/mtd_appdata/moip:/mtd_cmmlib/GAME_LIB:/mtd_appdata/gemstar:/mtd_cmmlib/DRM_LIB:/Java/lib:/mtd_cmmlib/InfoLink/lib:/mtd_appext/WidgetEngine:/mtd_appext/Webkit:/mtd_exe/WebServerApp/bin:/mtd_cmmlib/CBRE:/mtd_cmmlib/CBRE/bin/lib:/mtd_cmmlib/flashplayer/libs:/mtd_appdata/Runtime/lib/CairoShadow:/mtd_appdata/Runtime/lib:/mtd_appdata/Runtime/XorgLibs:/mtd_cmmlib/CM_LIB:/mtd_appext/OIPF/lib:/mtd_exe/OIPF/lib:/mtd_contents:/dtv
+ sync
+ sync
+ /tmp/bin/remshd33
/dtv/usb/sda1/SamyGO_data/run1.sh: line 21: /tmp/bin/remshd33: not found
+ /tmp/bin/busybox tcpsvd -vE 0.0.0.0 21 /tmp/bin/busybox ftpd -w /
/dtv/usb/sda1/SamyGO_data/run1.sh: line 20: /tmp/bin/busybox: not found
+ ln -s /dev/loop3 /tmp/loopnone
+ sync
+ /tmp/bin/busybox losetup /tmp/loopnone /mtd_rwcommon/widgets/user/SamyGO/data/samyext4.img
/dtv/usb/sda1/SamyGO_data/run1.sh: line 26: /tmp/bin/busybox: not found
+ /tmp/bin/busybox mount -o sync,exec /tmp/loopnone /mnt
/dtv/usb/sda1/SamyGO_data/run1.sh: line 27: /tmp/bin/busybox: not found
+ /tmp/bin/busybox --install -s /mnt/bin
/dtv/usb/sda1/SamyGO_data/run1.sh: line 28: /tmp/bin/busybox: not found
+ sync
+ cd /
+ /sbin/rmmod ARS_module
/dtv/usb/sda1/SamyGO_data/run1.sh: line 32: can't create /mnt/sam.log: Read-only file system
+ echo
/dtv/usb/sda1/SamyGO_data/run1.sh: line 33: can't create /mnt/sam.log: Read-only file system
+ echo ===========================
/dtv/usb/sda1/SamyGO_data/run1.sh: line 34: can't create /mnt/sam.log: Read-only file system
+ echo ls -la after rmmod ARS_module
/dtv/usb/sda1/SamyGO_data/run1.sh: line 35: can't create /mnt/sam.log: Read-only file system
+ echo ===========================
/dtv/usb/sda1/SamyGO_data/run1.sh: line 36: can't create /mnt/sam.log: Read-only file system
+ ls -la /mnt/*
/dtv/usb/sda1/SamyGO_data/run1.sh: line 37: can't create /mnt/sam.log: Read-only file system
+ echo ===========================
/dtv/usb/sda1/SamyGO_data/run1.sh: line 38: can't create /mnt/sam.log: Read-only file system
+ echo Starting rcSGO from run1.sh
/dtv/usb/sda1/SamyGO_data/run1.sh: line 39: can't create /mnt/sam.log: Read-only file system
+ echo ===========================
/dtv/usb/sda1/SamyGO_data/run1.sh: line 40: can't create /mnt/sam.log: Read-only file system
+ /mnt/bin/busybox sh -x /mnt/rcSGO /mnt
/dtv/usb/sda1/SamyGO_data/run1.sh: line 42: can't create /mnt/sam.log: Read-only file system
+ echo
/dtv/usb/sda1/SamyGO_data/run1.sh: line 43: can't create /mnt/sam.log: Read-only file system
+ echo ===========================
/dtv/usb/sda1/SamyGO_data/run1.sh: line 44: can't create /mnt/sam.log: Read-only file system
+ echo Starting UEP_killer.sh
/dtv/usb/sda1/SamyGO_data/run1.sh: line 45: can't create /mnt/sam.log: Read-only file system
+ echo ===========================
+ read child_pid others
+ ps
+ grep run.sh
+ /tmp/bin/UEP_killer.sh
/dtv/usb/sda1/SamyGO_data/run1.sh: line 46: /tmp/bin/UEP_killer.sh: not found
+ grep -v grep
+ echo Killing child process 881 of run.sh
Killing child process 881 of run.sh
+ kill -9 881
+ read child_pid others
Thanks
Re: [App] Rooting E/F on latest firmwares
Posted: Sat Jan 16, 2016 3:52 pm
by zoelechat
Log speaks by itself, you missed something in procedure, and/or omitted some required file:
Code: Select all
unzip: cannot find or open /mtd_rwcommon/widgets/user/SamyGO/data/data.zip
Follow carefully 1st post like you did "some months ago"
Btw, in case of root loss, no need to "reset" anything, just relaunch once installation widget, done.
Re: [App] Rooting E/F on latest firmwares
Posted: Sat Jan 16, 2016 4:00 pm
by spencer
zoelechat wrote:Log speaks by itself, you missed something in procedure, and/or omitted some required file:
Code: Select all
unzip: cannot find or open /mtd_rwcommon/widgets/user/SamyGO/data/data.zip
Follow carefully 1st post like you did "some months ago"
Btw, in case of root loss, no need to "reset" anything, just relaunch once installation widget, done.
I already had the "data.zip" file in the "SamyGO_data" folder of my pendrive
this is what I don't understand
