SamyGO

sectroyer wrote:

Pilzbier wrote:

sectroyer wrote:You need to disable watchdog in service menu:)

OK.
Where can I find it and disable it on a f-series?

Service Menu.

OK.
Now i ve only set watchdog to off.
Then I start SamyGo and it tells the same like on the first picture.
So I turned the TV off and on.
Then I wait some minutes and nothing happens.
But then I cant use the smart controll.
Nothing works.
I can only put the cable to set the TV off

Of course that's expected Try telneting and ftping to TV

OK.
I got Filezilla.
And when I put the adress of my TV in it,it says:

Status: Connecting to 192.168.0.12:21...
Status: Connection established, waiting for welcome message...
Status: Insecure server, it does not support FTP over TLS.
Status: Server does not support non-ASCII characters.
Status: Connected
Status: Retrieving directory listing...
Status: Directory listing of "/" successful

OK.
And what do I have to do now?

Pilzbier wrote:And what do I have to do now?

Check my post just above

OK.Done.
I ve disabled one by one.
99_99_ChannInfoON.init
99_99_InfoBannerDuration.init
99_99_PVRAnyDev.init
99_99_SleepTimer.init

Nothing happens till now

Nothing should "happen", except TV should stop to hold/crash after a few minutes...
If you're awaiting some presentation like "Welcome to SamyGO! Congratulations your TV is rooted!", there's no

ok.
But I cant use my smart control.
Should I plug the cable out to power off the TV?

No idea, maybe you have to re-pair it?

OK.
I ve plugged out the cable,then start the TV again and start the SamyGo Fix.
Now everything is green: Then I shut off the TV and powers it on again.
In the Menu the Software Update is gray and I cant choose.
The Auto Ticker is gray too and I cant choose SamyGo.
But after some minutes nothing happens.
The Firmware is still the new 2114.1
It didnt work.
Or do I have to do something other?