SamyGO

Unless you can reach 2018 TV yourself, and if nobody was kind enough to make some awesome pdf like I did for K, there's no known documentation of service menu.

Right so def in 2017 Q series however there is a lot of talk of it using SDDP no idea what that is. These posts are from Sep 2017. In one post the dev says 2017 TVs see below:



Sent from my SM-N950F using Tapatalk

Found this article on SDDP and in August 2017.
https://www.businesswire.com/news/home/ ... gy-2017-4K

Sent from my SM-N950F using Tapatalk

Well, now I'm a bit more convinced but still have no clue on how to enable it (if possible)

zoelechat wrote:Well, now I'm a bit more convinced but still have no clue on how to enable it (if possible)

Well going to look over the service menu again it might be directed at SDDP not IP ?

Sent from my SM-N950F using Tapatalk

Oh it also ref MU7000 MU6500 tvs isn't that pre Q7F

Sent from my SM-N950F using Tapatalk

MQ7Rocks wrote: ↑Wed May 02, 2018 10:20 pm service menu again it might be directed at SDDP not IP ?

No idea, but if you find something please report

MQ7Rocks wrote: ↑Wed May 02, 2018 10:21 pm Oh it also ref MU7000 MU6500 tvs isn't that pre Q7F

2017 too but mid-range, one letter per year was too simple...

Ok found this article https://developer.samsung.com/tv/develo ... 0030/index

Interesting smart view is what acts as the service that enables SDDP as per the article

Did you take a look at websockets stuff? Looks related (your article is about older models).
You can grab more infos there: https://github.com/Ape/samsungctl
Won't help from TV off though (but that's the only case).

zoelechat wrote:Did you take a look at websockets stuff? Looks related (your article is about older models).
You can grab more infos there: https://github.com/Ape/samsungctl
Won't help from TV off though (but that's the only case).

Ok so just for FYI I remember the Remote app that one can download from here and used Web sockets, so I tested it against the TV over IP. When it was ON this is after enabling CES Concierge Mode in the service menu etc.

It would return a error of 6001 can't connect. Reason behind CES options being enabled is that I read numerous articles stating that they showcased SDDP at CES so there was hope

I have tried all 'safe' options I can think of in the service and advanced menus. Still can't connect, interesting if I do a port scan on the TV IP address while it's on it reports 0 ports open which is odd as its wired and can connect to the Internet or other devices on the LAN.

I can't belive this isn't a sw setting somewhere....

I have 'power on using mobile devices' in the network settings in the On Screen Menu set to on, if it worked the way its saying in the settings... I should be able to power it on when it's off

Scanning the network further I see it is broadcasting URNs for screensharing, media device etc i.e urn:samsung:screensharing

I don't know maybe it has a firewall in the software or something?

Sent from my SM-N950F using Tapatalk