Re: Alternatives of Samsung WiFi Link Stick
Posted: Thu Oct 15, 2009 7:14 pm
injecting to squash FS also will break OS independency. For thoughts on this, I open a topic on General forum. Thanks
Samsung TV Firmware on the GO
https://forum.samygo.tv/
Code: Select all
<6>usb 2-1: new high speed USB device using ehci-s5h2x and address 2
<6>usb 2-1: configuration #1 chosen from 1 choice
<6>usb 2-1: USB disconnect, address 2
<1>[SERIAL INPUT MANAGE] Managed tty_struct(.name:ptm1) Setup!!!
<1>[SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
<1>[SERIAL INPUT MANAGE] enable_serial : debug(len: 5)
<1>
<6>usbcore: deregistering driver rt2870
<4><--- rtusb 2870 1.001(1.4.0.0) exit
<6>usbcore: deregistering driver rt73
<4><=== rtusb 0.994 exit
<6>usb 2-1: new high speed USB device using ehci-s5h2x and address 3
<6>usb 2-1: configuration #1 chosen from 1 choice
<4>rtusb 2870 1.002(1.4.0.0) [SamyGO] init --->
<7>
<4>
<4>=== pAd = d30a1000, size = 568816 ===
<4>
<4><-- RTMPAllocAdapterBlock, Status=0
<6>usbcore: registered new driver rt2870
output of:hubecker wrote:Doesn't work for me. Just can post what dmesg says:
...
Regards
Hubert
Code: Select all
cat /sys/bus/usb/devices/usb4/subsystem/drivers/rt2870/*/*
Code: Select all
cat /sys/bus/usb/devices/usb4/subsystem/drivers/rt73/*/*
The problem with 13.th channel is that frequency forbidden for WiFi devices in US but EU. 1-11 channels will work on your devices. I didn't remember 12.th channel but that could be forbidden too.kluczus wrote:I have Linksys WUSB54GC and Motorola with dd-wrt, everything is working when I change wifi channel from 13 to 10 or 1. On channel 13 usb cannot find my AP.
How to make changes with modules pernament ?
If I can prepare native compiling toolchain properly, I willslawekxyz wrote:Hey Guys.
I have a Samsung TV LE40B650 and USB WiFi dongle Edimax EW-7718Un (RT2870 chipset, Vendor = 7392, ProdID = 7718). Is it possible you upgraded rt2870sta.ko file for this device ? I tried to do something myself, but ..... without results.
Thanks and BR.