Page 3 of 14
Re: [App] libFakeEDID E/F/H
Posted: Wed Nov 18, 2015 1:28 pm
by seb79
Thank you very much for your reply.
But loading dumped EDID is not considered as an injection ?
Not a big deal, I just wanted confirmation that the EDID restore was successfull.
By the way, is there any consequence by keeping fake EDID after unroot ?
Re: [App] libFakeEDID E/F/H
Posted: Wed Nov 18, 2015 2:37 pm
by zoelechat
seb79 wrote:But loading dumped EDID is not considered as an injection ?
It's one, everytime you use samyGOso is an injection.
seb79 wrote:By the way, is there any consequence by keeping fake EDID after unroot ?
If you didn't get at least "Dolby Digital" option available on HDMI (without using libHDMIpassthru), I'm not sure EDIDs were really faked, no idea why though (full logs would have been worth to look at...)
No consequence at all, as long as you don't notice any, but I don't think so
Re: [App] libFakeEDID E/F/H
Posted: Wed Nov 18, 2015 3:40 pm
by seb79
zoelechat wrote:seb79 wrote:But loading dumped EDID is not considered as an injection ?
It's one, everytime you use samyGOso is an injection.
Ok : I misunderstood what you wrote (I thought you said it was normal that no log were generated)
zoelechat wrote:(full logs would have been worth to look at...)
I can post my full log in the evening : I saved it on my computer.
Re: [App] libFakeEDID E/F/H
Posted: Wed Nov 18, 2015 4:34 pm
by zoelechat
Ok, if you still have it (just in case: libHDMIpassthru log too?). I'm surprised though, even more about:
Dolby passthrough results in outputting the audio of the tuner (in Dolby) instead of the audio of my HDMI source...
Are you sure everything was rightly plugged !!?
Did you retry several times to LOAD? Did you use latest samyGOso (v1.2.5)? Are you aware that logs are in a temp folder and consequently erased on TV reboot?
Re: [App] libFakeEDID E/F/H
Posted: Wed Nov 18, 2015 8:21 pm
by seb79
Ok, so here is the full log :
Code: Select all
[FakeEDID] SamyGO E/F/H libFakeEDID v0.1.9 - (c) zoelechat 2015
[FakeEDID] _ZN9TDBuilder11GetTDiStoreE15TDStoreObject_k [0x7381e0].
[FakeEDID] _ZN9TDBuilder16GetTDiHdmiSwitchEv [0x738374].
[FakeEDID] _ZN8TDaStore6CreateEi [0x7e0378].
[FakeEDID] _ZN8TDaStore7DestroyEv [0x7e0084].
[FakeEDID] dlsym '_ZN14TDsEepromStore5WriteEjjPKh' failed.
[FakeEDID] _ZN14TDsEepromStore10t_WriteDDCEjjPKh [0x8b89e4].
[FakeEDID] dlsym '_ZN14TDsEepromStore4ReadEjjPh' failed.
[FakeEDID] _ZN14TDsEepromStore9t_ReadDDCEjjPh [0x8b8828].
[FakeEDID] dlsym '_ZN18TDsPrimeHdmiSwitch11GetEDIDDataE10CDSource_kPhPt' failed.
[FakeEDID] dlsym '_ZN13TDaHdmiSwitch11GetEDIDDataE10CDSource_kPhPt' failed.
[FakeEDID] _ZN19PrimeHdmiSwitchBase11GetEDIDDataE10CDSource_kPhPt [0x8a4378].
[FakeEDID] lib_init, >>>
[FakeEDID] Dumping default EDID first block!
[FakeEDID] Overriding HDMI1 EDID with AC3/DTS support!
[FakeEDID] Overriding HDMI2 EDID with AC3/DTS support!
[FakeEDID] Overriding HDMI3 EDID with AC3/DTS support!
[FakeEDID] Overriding HDMI4 EDID with AC3/DTS support!
[FakeEDID] <<< lib_deinit
Unfortunately I did not saved the HDMI passthru log. To respond to your questions :
Yes I downloaded the latest samyGO v1.2.5
I saw that logs were erased after TV reboot, but I checked the log just after sending the command line : I have got a log for the dump, got it for the fake, but no one for the load (that was the reason I asked you if it was normal). As i didn't saw the log at the load the first time I tried several times and also one HDMI port by one => no more luck.
About the Dolby passthrough which is outputting the audio of the tuner : yes I am absolutely certain of the plug. At the first time, the Dolby select was outputting PCM, but when switching from internal tuner (on a dolby channel) to the HDMI source, then the Dolby select was resulting in outputting the audio of the tuner. I was able to also select DTS : this was resulting in outputting DTS from my HDMI source but I suspect that is the same result as DTS Neo 2:5 (so in fact a fake DTS).
Re: [App] libFakeEDID E/F/H
Posted: Wed Nov 18, 2015 8:35 pm
by zoelechat
Ok, thanks for feedback.
Well, if TV outputted DTS when selecting DTS, it was probably true one, not Neo. I think patch worked and the point was just to select the right audio type
Re: [App] libFakeEDID E/F/H
Posted: Wed Nov 18, 2015 9:13 pm
by seb79
zoelechat wrote:Ok, thanks for feedback.
Well, if TV outputted DTS when selecting DTS, it was probably true one, not Neo. I think patch worked and the point was just to select the right audio type
Actually I'm pretty sure of the contrary because my HDMI source was sending a Dolby Digital signal ! (it is a STB)
If the TV outputs a signal different from the source it cannot be pass through...
Re: [App] libFakeEDID E/F/H
Posted: Wed Nov 18, 2015 9:27 pm
by zoelechat
Right, possible it doesn't work then, you're the first one to give H feedback
Re: [App] libFakeEDID E/F/H
Posted: Wed Nov 18, 2015 9:41 pm
by seb79
ok
Maybe there is something else than EDID which blocks the source ?
Actually, before rooting I tried to insert an HDMI switch between my STB and my TV (as suggested in "HDMI 5.1 audio passthrough patch" thread first post), but no luck neither (DTS and Dolby option still greyed)...
Re: [App] libFakeEDID E/F/H
Posted: Wed Nov 18, 2015 9:45 pm
by zoelechat
Well, I wouldn't be surprised if Samsung had blocked any EDID faking possibility at some point in firmware development, but it's just a guess, I lack informations...