SamyGO Extensions [v0.03.6] for c-series

[arris69]

Hi

There are some problems with recent version of SamyGO extensions on C650:

1. VUSB problem.
...

So VUSB does not work.
Also, /dtv/SGO.env lacks MOD_DIR="/dtv/usb/sda1/SamyGO/lib/modules/2.6.24_SELP.4.3.x-Cortex-A8" or similar definition for VUSB to run.

2. busybox problem
...

---

cifs module loads properly and cifs mount works OK.

regards
Maciej

thnx for the report:
vusb seems to be "broken" in this kernel or conflicts with soc, but the message should be something about can't claim resource and not device busy.
btw. its not required than we have to use real usb-storage device for now to get programs started on tv.

if /dtv/SGO.env don't has entry for MOD_DIR start pls. SamyGO/rcSGO with

Code: Select all

sh -x <usbmountpoint>/SamyGO/rcSGO &

from command line and send me the output.

for busybox, strace and gdb are also shipped with extensions
as quick workaround you can replace busybox with the version compiled by timoo here?
shipped version is ok for b and a series, so i wait for patches

arris

[arris69]

Hello,

This is working for virtual usb for nfs:

Code: Select all

echo "[sdd]
Vendor : Linux
Product : NAS
Serial : Q80VQLFL
Devpath : nfs
Lun : 0
ScsiDevicePath : /dev/sdd1
MountDir : /dtv/usb/sda1/nfs
FileSystem : nfs
" >> /dtv/usb/usblog

Thanks for the extentions.

thnx
but question is do you need the entry in usblog? if you mount your nfs to /dtv/usb/sda1/nfs than its mounted to usb-pen so you can access it from media player if you select your usb-pen and go to folder nfs. or show the tv some kind of popup window if you do the echo... to /dtv/usb/usblog?

the "real" virtual usb part (dummy_hcd.ko and g_file_storage.ko, non working on c series for now) where required if there is no usb-pen attached to tv, then in this case exeDSP ignores entries from /dtv/usb/usblog file.

thnx
arris

[arris69]

Arris, this is my output with a 32c6700

~ # ./dtv/usb/sda1/SamyGO/rcSGO ----- I type this line in telnet to start rcSGO ----

this is my output with revision 6

/...

regards rob

ps samba, ftp, winscp (scp), pvr function work just fine /
only thing missing is autostart in telnet run.sh script ? linux noob

you forgot to pass sh -x before the command but not so important if other parts are working messages are ok -> normal condition
why you need telnet if you have ssh?
scp files to tv is realy working? (never tested it )

somebody an idea why

Code: Select all

'/proc/scsi/scsi': No such file or directory

thnx
arris

[arris69]

Hello,
....

Edit:
When you place the code in 03_03_nfsmount.init at the end of the function do_mount() it works automatically

The problem now is that rcSGO don't start when I place sh +X /dtv/usb/sda1/SamyGO/rcSGO in run.sh, I have to run it manually from telnet :s
Anny solutions?

the old code is in 03_03_nfsmount.init (firs 2 comment lines in do_mount) needs some changes i have to test what b series tv do if we write in new syntax to log file.
EDIT: no need to test for b series latest version don't need to write to log file on this devices.

for start:
1. exact command line: (case sensitive!!!)

Code: Select all

sh +x /dtv/usb/sda1/SamyGO/rcSGO &

or

Code: Select all

sh /dtv/usb/sda1/SamyGO/rcSGO &

or

Code: Select all

/dtv/usb/sda1/SamyGO/rcSGO &

you can also try to delete the line

Code: Select all

sleep 9

in SamyGO/rcSGO script

arris