SamyGO

Samsung TV Firmware on the GO
https://forum.samygo.tv/

[ROOT] H "Network" root (FW<=Oct.2015, no T-GFS)

https://forum.samygo.tv/viewtopic.php?t=9622

Page 40 of 157

Re: [!!!] Rooting H on latest firmwares

Posted: Fri Oct 23, 2015 10:40 am
by wifi75
then I send again your last command...

Code: Select all

C:\Users\Alice\Downloads\netcat-win32-1.11\netcat-1.11>nc 192.168.1.219 3123
/bin/sh: can't access tty; job control turned off
VDLinux#> /sbin/insmod /tmp/antysfd.ko
insmod: can't insert '/tmp/antysfd.ko': invalid module format
VDLinux#> /bin/dmesg | /bin/busybox tail
BTSBC btsbc_encode: SBC Encoding duration=29us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=37us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=29us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=38us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=41us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
VDLinux#>

Re: [!!!] Rooting H on latest firmwares

Posted: Fri Oct 23, 2015 10:42 am
by sectroyer
wifi75 wrote:below sam.log

Code: Select all

+ /bin/sleep 30
+ /dtv/bin/ls
Terminated
+ [ 143 -eq 143 ]
+ echo SFD detected. Insmoding...
SFD detected. Insmoding...
+ /bin/cp /dtv/usb/sda1/SamyGO/antysfd.ko /tmp/
+ /bin/cp /dtv/usb/sda1/SamyGO/ntkfree /tmp/
+ /sbin/insmod /tmp/antysfd.ko
insmod: can't insert '/tmp/antysfd.ko': invalid module format
+ [ 8 -ne 0 ]
+ /bin/dmesg
+ /bin/grep antysfd
+ /bin/busybox tail -n 1
+ /bin/busybox cut -d ' -f 4
+ good_vermagic=
+ echo good vermagic=''
good vermagic=''
+ echo 
+ /bin/dmesg
+ /bin/busybox grep anty
+ chmod +x /tmp/ntkfree
Terminated
+ mknod /dtv/ntkaxis c 140 0
Terminated
+ /tmp/ntkfree
Terminated
+ cp /dtv/usb/sda1/SamyGO/samyGOso /tmp/
Terminated
+ cp /dtv/usb/sda1/SamyGO/libNetSwitch.so /tmp/
Terminated
+ chmod +x /tmp/samyGOso
Terminated
+ /tmp/samyGOso -d -A -r -l /tmp/libNetSwitch.so WIRED
/dtv/usb/sda1/SamyGO/lan.sh: line 5: /tmp/samyGOso: not found
+ echo checking /dtv/usb/sda1
checking /dtv/usb/sda1
+ /bin/sleep 1
+ [ -e /dtv/usb/sda1/STOP_SAMYGO ]
+ cd /tmp
+ mkdir /tmp/bin
Terminated
+ echo OK
+ [ -e /dtv/qcm_samygo ]
+ touch /dtv/qcm_samygo
Terminated
+ cp /dtv/usb/sda1/SamyGO/samygo_telnetd /dtv/
Terminated
+ chmod +x /dtv/samygo_telnetd
Terminated
+ cp /dtv/usb/sda1/SamyGO/busybox /tmp/bin/
+ /dtv/samygo_telnetd 33
/dtv/usb/sda1/SamyGO/run1.sh: line 22: /dtv/samygo_telnetd: not found
Terminated
+ chmod +x /tmp/bin/busybox
Terminated
+ /tmp/bin/busybox --install -s /tmp/bin
/dtv/usb/sda1/SamyGO/run1.sh: line 27: /tmp/bin/busybox: not found
+ sync
Terminated
+ export PATH=/tmp/bin:/dtv/bin:/usr/sbin:/usr/bin:/bin:/sbin:/etc/Scripts:/util
+ export LD_LIBRARY_PATH=/tmp/bin:/dtv/bin:/lib
+ sync
Terminated
+ sync
+ /tmp/bin/busybox tcpsvd -vE 0.0.0.0 21 /tmp/bin/busybox ftpd -w /
/dtv/usb/sda1/SamyGO/run1.sh: line 32: /tmp/bin/busybox: not found
Terminated
+ ln -s /dev/loop3 /tmp/loopnone
Terminated
+ sync
Terminated
+ [ -e /dtv/usb/sda1/SamyGO/newvdfs.img ]
+ /tmp/bin/busybox losetup /tmp/loopnone /dtv/usb/sda1/SamyGO/samyext4.img
/dtv/usb/sda1/SamyGO/run1.sh: line 44: /tmp/bin/busybox: not found
+ /tmp/bin/busybox mount -t ext4 -o sync,exec /tmp/loopnone /mnt
/dtv/usb/sda1/SamyGO/run1.sh: line 44: /tmp/bin/busybox: not found
+ /tmp/bin/busybox --install -s /mnt/bin
/dtv/usb/sda1/SamyGO/run1.sh: line 45: /tmp/bin/busybox: not found
+ sync
Terminated
+ rm /mnt/sam.log
Terminated
/dtv/usb/sda1/SamyGO/run1.sh: line 48: can't create /mnt/sam.log: Read-only file system
+ ls -la /mnt/*
/dtv/usb/sda1/SamyGO/run1.sh: line 49: can't create /mnt/sam.log: Read-only file system
+ echo ===========================
/dtv/usb/sda1/SamyGO/run1.sh: line 50: can't create /mnt/sam.log: Read-only file system
+ echo Starting rcSGO from run1.sh
/dtv/usb/sda1/SamyGO/run1.sh: line 51: can't create /mnt/sam.log: Read-only file system
+ echo ===========================
/dtv/usb/sda1/SamyGO/run1.sh: line 52: can't create /mnt/sam.log: Read-only file system
+ /mnt/bin/busybox2 sh -x /mnt/rcSGO /mnt
That's old file :) I need new one. You make recording ONLY ONCE !!!! JUST to have "recording usb". Then simply keep it connected no need to record more :P

Re: [!!!] Rooting H on latest firmwares

Posted: Fri Oct 23, 2015 10:43 am
by sectroyer
wifi75 wrote:then I send again your last command...

Code: Select all

C:\Users\Alice\Downloads\netcat-win32-1.11\netcat-1.11>nc 192.168.1.219 3123
/bin/sh: can't access tty; job control turned off
VDLinux#> /sbin/insmod /tmp/antysfd.ko
insmod: can't insert '/tmp/antysfd.ko': invalid module format
VDLinux#> /bin/dmesg | /bin/busybox tail
BTSBC btsbc_encode: SBC Encoding duration=29us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=37us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=29us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=38us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=41us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
VDLinux#>
Okay I didn't get the shit I wanted try these commands:

Code: Select all

/sbin/insmod /tmp/antysfd.ko
/bin/dmesg | /bin/grep antysfd

Re: [!!!] Rooting H on latest firmwares

Posted: Fri Oct 23, 2015 10:45 am
by wifi75
old file?

please send me link for new file...

Re: [!!!] Rooting H on latest firmwares

Posted: Fri Oct 23, 2015 10:47 am
by wifi75
sectroyer wrote:
wifi75 wrote:then I send again your last command...

Code: Select all

C:\Users\Alice\Downloads\netcat-win32-1.11\netcat-1.11>nc 192.168.1.219 3123
/bin/sh: can't access tty; job control turned off
VDLinux#> /sbin/insmod /tmp/antysfd.ko
insmod: can't insert '/tmp/antysfd.ko': invalid module format
VDLinux#> /bin/dmesg | /bin/busybox tail
BTSBC btsbc_encode: SBC Encoding duration=29us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=37us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=29us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=38us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=41us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
VDLinux#>
Okay I didn't get the shit I wanted try these commands:

Code: Select all

/sbin/insmod /tmp/antysfd.ko
/bin/dmesg | /bin/grep antysfd
see below

Code: Select all

C:\Users\Alice\Downloads\netcat-win32-1.11>nc 192.168.1.219 3123
/bin/sh: can't access tty; job control turned off
VDLinux#> /sbin/insmod /tmp/antysfd.ko
insmod: can't insert '/tmp/antysfd.ko': invalid module format
VDLinux#> /bin/dmesg | /bin/grep antysfd
VDLinux#>

Re: [!!!] Rooting H on latest firmwares

Posted: Fri Oct 23, 2015 10:53 am
by sectroyer
okay keep tryint this command:

Code: Select all

/sbin/insmod /tmp/antysfd.ko; /bin/dmesg | /bin/busybox tail
UNTIL you get some output WITH antysfd in it. Then post it :)

BTW. So much shit in log probably indicates there is something wrong with your TV :)

Re: [!!!] Rooting H on latest firmwares

Posted: Fri Oct 23, 2015 11:00 am
by wifi75
below code

Code: Select all

C:\Users\Alice\Downloads\netcat-win32-1.11>nc 192.168.1.219 3123
/bin/sh: can't access tty; job control turned off
VDLinux#> /sbin/insmod /tmp/antysfd.ko; /bin/dmesg | /bin/busybox tail
insmod: can't insert '/tmp/antysfd.ko': invalid module format
##### send signal SIG : 15, clear(7175)->clear(7175) __send_signal
[SFD][BLOCK] Process with PID 7175 has been blocked!
##### deliver signal SIG : 9, clear(7175) get_signal_to_deliver
BTSBC btsbc_encode: SBC Encoding duration=38us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=29us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=27us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=27us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=27us min=27us max=59us avg=30us
VDLinux#>

Re: [!!!] Rooting H on latest firmwares

Posted: Fri Oct 23, 2015 11:21 am
by MrBond
Hi

It worked!

UE40H6475, T-MST14DEUC-2710.3
Now i need to find out to downgrade to 2130, and install OSCAM.

Cheers!

Re: [!!!] Rooting H on latest firmwares

Posted: Fri Oct 23, 2015 12:08 pm
by sectroyer
wifi75 wrote:below code

Code: Select all

C:\Users\Alice\Downloads\netcat-win32-1.11>nc 192.168.1.219 3123
/bin/sh: can't access tty; job control turned off
VDLinux#> /sbin/insmod /tmp/antysfd.ko; /bin/dmesg | /bin/busybox tail
insmod: can't insert '/tmp/antysfd.ko': invalid module format
##### send signal SIG : 15, clear(7175)->clear(7175) __send_signal
[SFD][BLOCK] Process with PID 7175 has been blocked!
##### deliver signal SIG : 9, clear(7175) get_signal_to_deliver
BTSBC btsbc_encode: SBC Encoding duration=38us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=29us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=27us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=27us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=27us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=27us min=27us max=59us avg=30us
VDLinux#>
Ehh you tried ONLY once!!!! Try MANY TIMES. UNTIL you see some log with "antysfd"!!! Also waited LOOOONGER. This line:

Code: Select all

[SFD][BLOCK] Process with PID 7175 has been blocked!

Shows that you did NOT wait 10 minutes BEFORE TRYING (MULTIPLE TIMES!!!!)!!!

Re: [!!!] Rooting H on latest firmwares

Posted: Fri Oct 23, 2015 12:13 pm
by wifi75
ok see now

Code: Select all

VDLinux#> /sbin/insmod /tmp/antysfd.ko; /bin/dmesg | /bin/busybox tail
insmod: can't insert '/tmp/antysfd.ko': invalid module format
BTSBC btsbc_encode: SBC Encoding duration=28us min=26us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=44us min=26us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=26us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=26us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=50us min=26us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=38us min=26us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=28us min=26us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=27us min=26us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=29us min=26us max=59us avg=30us
BTSBC btsbc_encode: SBC Encoding duration=39us min=26us max=59us avg=30us
VDLinux#>
All times are UTC+01:00
Page 40 of 157

Powered by phpBB® Forum Software © phpBB Limited