Page 5 of 8
Re: D series rooting (arm cpu architecture only) UPDATE!
Posted: Thu Dec 29, 2011 8:27 pm
by Denny
And one next: is it possible to change default recording device, somewhere in the options ? ( I didn't found it)
i wrote you, it is posible if you have multiple devices, look at facebook , there is one image i think posted.
to get options menue you may go :
SmartHub -> RecordedTV -> RightSideUP you have 3 icons -> select 1st one "Device Managment" then go down to Default Recording Device : -> Select whitch one you want , if you have more then one.
remember, device that is not xfs format , will be listed only after exec uting of samygo app.
Re: D series rooting (arm cpu architecture only) UPDATE!
Posted: Fri Dec 30, 2011 10:24 pm
by jarod73
This is my 03_03_nfsmount.init
I use a pendrive always connected to tvset to create sda1 virtual usb. ( at the moment I've not figured how to create one new at samygo start-up)
My nfsserver is freenfs configured to share d:\nfsrec\rec .
I can record but i can't access recorded files by tv-recording widget in smart-hub.
bye J.
Code: Select all
#!/bin/sh
#
# ? Copyright 1996-2010, ZsoltTech.Com
# by Ser Lev Arris <arris@ZsoltTech.Com>
#
# donated for the SamyGo Project
# http://samygo.sourceforge.net/
#
# Version: SamyGO svn $Id: 03_03_nfsmount.init 1069 2011-01-03 16:47:24Z arris69 $
. /dtv/SGO.env
# sleep 9
##### YOU CAN CHANGE ME HERE ######
SERVER="10.7.128.23"
# SERVER="10.0.0.1" # if you want a fixed server
SHARES="/rec"
# SHARES="Video Music Photo" # if you won't all your shares, but then set SERVER too!!
##### CHANGE ME END ######
FR_NAME="NFS Server"
M_OPTS="soft,tcp,async,nolock,rsize=32768,wsize=8192"
# M_OPTS="rw,soft,udp,nolock,rsize=32768,wsize=32768"
# M_OPTS="soft,tcp,nolock,rsize=32768,wsize=32768"
# M_OPTS="soft,tcp,nolock,rsize=8192,wsize=8192"
# M_OPTS="soft,tcp,nolock"
SERVERS="Don't set me!!"
####### DEST_DIR=$MOUNT_PATH/nfs
DEST_DIR="/dtv/usb/sda1"
do_mount()
{
# $(echo -e "[sdg]\nVendor : NfsMount\nProduct : $FR_NAME\n\
#Serial : Q80VQLFG\nDevpath : 7\nLun : 0\nMountDir : $DEST_DIR\nFileSystem : vfat\n" >> /dtv/usb/log)
for i in $S_MOUNTS ; do
######## M_POINT="$DEST_DIR/$1/$(echo -n $i | sed -e "s/\//_/g")"
M_POINT="$DEST_DIR(echo -n $i | sed -e "s/\//_/g")"
######## mkdir -p "$M_POINT"
if [ `cat /proc/mounts | grep -c "$M_POINT"` -lt "1" ] ; then
######## /bin/busybox mount -o "$M_OPTS" "$1:$i" "$M_POINT"
/bin/busybox mount -o "$M_OPTS" "$1:$i" "$DEST_DIR" -t nfs
else
echo "$M_POINT is mounted!"
fi
done
}
get_shares()
{
if [ -z "$SHARES" ] ; then
echo -n "Search Shares on: "
for i in $SERVERS ; do
echo $i
# S_MOUNTS=$(showmount --no-headers -e $i | cut -d " " -f1)
S_MOUNTS=$(showmount --no-headers -e $i | sed 's/^\(.*\) .*/\1/')
[ -n "$S_MOUNTS" ] && do_mount $i
done
else
echo -n "Fixed Server: "
for i in $SERVERS ; do
echo $i
S_MOUNTS=$SHARES
[ -n "$S_MOUNTS" ] && do_mount $i
done
fi
}
get_servers()
{
if [ -z "$SERVER" ] ; then
# SERVERS=$(cat /proc/net/arp | grep -v "IP address" | cut -d " " -f1)
SERVERS=$(cat /proc/net/arp | grep -v "IP address" | sed 's/^\(\w*.\w*.\w*.\w*\) *.*/\1/')
else
SERVERS=$SERVER
fi
}
case $1 in
start)
# for systems with modular nfs kernel support
insmod $MOD_DIR/kernel/net/sunrpc/sunrpc.ko
insmod $MOD_DIR/kernel/fs/lockd/lockd.ko
insmod $MOD_DIR/kernel/fs/nfs_common/nfs_acl.ko
insmod $MOD_DIR/kernel/fs/nfs/nfs.ko
get_servers
get_shares
;;
stop)
# may can fail if device access the mount from content library
# for i in $(cat /proc/mounts | grep nfs | cut -d " " -f2) ; do
for i in $(cat /proc/mounts | grep "$DEST_DIR" | sed 's/^\(.*\) \(.*\) nfs .*/\2/') ; do
/bin/busybox umount $i
done
;;
status)
/bin/mount | grep "$DEST_DIR"
;;
*)
echo "Usage: $0 {start|stop|status}" 1>&2
exit 0
;;
esac
Re: D series rooting (arm cpu architecture only) UPDATE!
Posted: Sat Dec 31, 2011 1:47 pm
by jarod73
Cyrille, I don't use 80_80 anymore and I don't use scripts from remi75.
You need only to use 03_03 I've attached here.
replace your 03_03 ( after a making a backp copy of it )and change only server and share.
share must start with / so your share should be "/Multimedia Multimedia/Films Multimedia/Dessins_animes",
assuming you nfs server is sharing this full path.
there is something wrong if you have NFS mounted on /dtv/usb/sda1/Multimedia , you have to mount it on /dtv/usb/sda1 to work.
I think you have not replaced 03_03 script.
I use nfs only for recording and samba to access shares where my video are.
Bye J.
Re: D series rooting (arm cpu architecture only) UPDATE!
Posted: Sat Dec 31, 2011 2:14 pm
by hondavtec
jarod73 wrote:I use nfs only for recording and samba to access shares where my video are.
Do I need to create a second virtual USB device... if yes: how?
Could I just create / duplicate a 02_04_vusb2.init file?
This question is really bugging me for some time now...
Re: D series rooting (arm cpu architecture only) UPDATE!
Posted: Sat Dec 31, 2011 6:19 pm
by jarod73
Cyrille ,
on my tvset sda1 is pendrive (I use the one xfs formatted by the pvr-recorder and is always connected), sdb is samygo virtual usb where samba shares are mounted automatically .
script executes pratically this :
Code: Select all
/bin/busybox mount -o soft,tcp,async,nolock,rsize=32768,wsize=8192 10.7.128.23:/rec /dtv/usb/sda1 -t nfs
try to run the command above manually to see what you obtain via <your tv ip>/phpsysinfo/shell.php
and also try browse your tv to see if your pendrive is really sda1 like on mine.
ah.. and you changed default recording device , right?? if not you are trying to record over samygo virtual usb I suppose.