SamyGO

schybiorz wrote: ↑Mon Dec 13, 2021 11:15 pm Thanks you for Super support.

Now it is working. All I had to do was also to connect ground from led strip to arduino pro micro.

Now all is working like it should.

Some minor colour dispatch (gamma) lightblue seems like turkies
But it's a new dimension of looking TV.

I'm happy.

You can adjust saturation and value gains from sambilight.config file. Alternatively you can add color correction parameter to FastLED from arduino, please check FlastLed examples for that.
I personally prefer to increase saturation gain for movies that is why 21:9 profile has higher value for that.

Nice. Will look after it at the weekend.

libSambilight works with MST FWs only. Do you see any chance to port libSambilight also to non-MST TVs?

mancik wrote: ↑Sun Dec 19, 2021 1:24 pm libSambilight works with MST FWs only. Do you see any chance to port libSambilight also to non-MST TVs?

It may work on H but i don't have a MST or Non-MST H series TV so i am not exactly sure. Library may be ported to Non-MST devices with some afford but i cannot do it without having the exact hardware.

my question is about non-MST F-Series. Unfortunately it sounds like my chances are lower than low...

Hi tasshack,
Is there any chance u might look into remote control für h series mst?

Ambilight itself is still working like it should.

schybiorz wrote: ↑Sat Dec 25, 2021 6:01 pm Hi tasshack,
Is there any chance u might look into remote control für h series mst?

Ambilight itself is still working like it should.

The problem is F and H are very different. You need to inject with -T on H to get the capture data and you cannot get TV remote injecting with -T. I tried to implement twice injection with both -T and -A but then i realized you need to inject with -A to gfx_lib to work on E/F series. Therefore i need to release two different versions for E/F and H to support remote control but i didn't want to do that.

To support remote control on H, I will add a feature to control sambilight from other libraries like libRCremap.

I used to use remote control only for only changing profiles but since i have added black border detection, i have never needed to use remote control for sambilight.

Ok.

I think it is not possible to inject a menu under Tools (TV remote) to change
saturation_gain_percent": 130,
"value_gain_percent": 90,
"brightness_correction": -7
And on off

Like used to in
viewtopic.php?f=63&t=8943

Oh yes librcremap would also cool.

New version released;
- Fixed green flashing after change channel while watching TV from tuner.
- Fixed black border detection interfering with brightness correction.

I’d love to try to set this up on my ue46es6300. Which strips are you recommending ?

Thanks