SamyGO

sectroyer wrote:

Deus3X wrote:so...
now the samba share is correctly mounted for recording...
But there is a problem...
The tv asked me to do a test... and the samba share haven't passed the test... write speed 0 reading speed 0
The samba directory mounted has reading and writing authorization, and i'm using a gigabyte lan...

Check with ftp client there is

Code: Select all

.PVRPfmChkLog

on your USB. Just copy it to your samba share and it will stop asking

i can't find it :/

Deus3X wrote:

sectroyer wrote:

Deus3X wrote:so...
now the samba share is correctly mounted for recording...
But there is a problem...
The tv asked me to do a test... and the samba share haven't passed the test... write speed 0 reading speed 0
The samba directory mounted has reading and writing authorization, and i'm using a gigabyte lan...

Check with ftp client there is

Code: Select all

.PVRPfmChkLog

on your USB. Just copy it to your samba share and it will stop asking

i can't find it :/

Because you mount bind'ed samba share there Disable it and you will find it

I think FileZilla doesn't see hidden files by default.
Anyway just copy it after having disabled mount bind and rebooted TV

zoelechat wrote:I think FileZilla doesn't see hidden files by default.
Anyway just copy it after having disabled mount bind and rebooted TV

Code: Select all

cp /dtv/usb/sda1/CONTENTS/.PVRPfmChkLog /dtv/usb/sdb/smb/192.168.2.33/REG_TV

i copied the file from usb to samba dir..
Now the tv does not require the test.. but when i press rec it does not start... ask me to repair the device...

Deus3X wrote:

zoelechat wrote:I think FileZilla doesn't see hidden files by default.
Anyway just copy it after having disabled mount bind and rebooted TV

Code: Select all

cp /dtv/usb/sda1/CONTENTS/.PVRPfmChkLog /dtv/usb/sdb/smb/192.168.2.33/REG_TV

i copied the file from usb to samba dir..
Now the tv does not require the test.. but when i press rec it does not start... ask me to repair the device...

Yes because you DID have some recordings there Best is to remove ALL recordings and then before mounting copy ALL files from CONTENTS directory

sectroyer wrote:

Deus3X wrote:

zoelechat wrote:I think FileZilla doesn't see hidden files by default.
Anyway just copy it after having disabled mount bind and rebooted TV

Code: Select all

cp /dtv/usb/sda1/CONTENTS/.PVRPfmChkLog /dtv/usb/sdb/smb/192.168.2.33/REG_TV

i copied the file from usb to samba dir..
Now the tv does not require the test.. but when i press rec it does not start... ask me to repair the device...

Yes because you DID have some recordings there Best is to remove ALL recordings and then before mounting copy ALL files from CONTENTS directory

I'm learning lots of thing
I will try it
Thanks you boot for all, you and zoelechat Are my hero

sectroyer wrote:

Deus3X wrote:

zoelechat wrote:I think FileZilla doesn't see hidden files by default.
Anyway just copy it after having disabled mount bind and rebooted TV

Code: Select all

cp /dtv/usb/sda1/CONTENTS/.PVRPfmChkLog /dtv/usb/sdb/smb/192.168.2.33/REG_TV

i copied the file from usb to samba dir..
Now the tv does not require the test.. but when i press rec it does not start... ask me to repair the device...

Yes because you DID have some recordings there Best is to remove ALL recordings and then before mounting copy ALL files from CONTENTS directory

you are hating me (hope no )
i tryed:
1) disable samba mount
2) restarted the tv and recorded from tv to usb
3) deleted from the tv browser the recording
4) copied from CONTENTS folder all the file (.PVRPfmChkLog and NewBoard.ss) into my samba share (REG_TV)
5) enabled samba mount for recording
6) restarted the tv
7) waited for samba mout and then tried a recording...

same error, tv asked me to repair the device...

what i made wrong this time?
what have you write that i had no understand ?

Deus3X wrote: you are hating me (hope no )
i tryed:
1) disable samba mount
2) restarted the tv and recorded from tv to usb
3) deleted from the tv browser the recording
4) copied from CONTENTS folder all the file (.PVRPfmChkLog and NewBoard.ss) into my samba share (REG_TV)
5) enabled samba mount for recording
6) restarted the tv
7) waited for samba mout and then tried a recording...

same error, tv asked me to repair the device...

what i made wrong this time?
what have you write that i had no understand ?

Ehhh pointless it looks. Now you will have to try is to create a xfs image (for instance 1TB) and mount it over samba this HAS TO WORK

sectroyer wrote:

Deus3X wrote: you are hating me (hope no )
i tryed:
1) disable samba mount
2) restarted the tv and recorded from tv to usb
3) deleted from the tv browser the recording
4) copied from CONTENTS folder all the file (.PVRPfmChkLog and NewBoard.ss) into my samba share (REG_TV)
5) enabled samba mount for recording
6) restarted the tv
7) waited for samba mout and then tried a recording...

same error, tv asked me to repair the device...

what i made wrong this time?
what have you write that i had no understand ?

Ehhh pointless it looks. Now you will have to try is to create a xfs image (for instance 1TB) and mount it over samba this HAS TO WORK

no ideas
i tried to create a ifs image and mounting it for 2 days always with no result.. That was the reason for me to edit vusb init script