SamyGO

Hello.
I just reset my TV (UE46F6340SS) and start the Service Menu to turn off the OTN.
After that I reboot the TV.Its works,but I cant use my Remote Controll.The red light of the IR on the TV is flashing but no button is working.
The Power off and switching Button behind the TV did not work.
I can only plug out the cable to shut down the PC.
When I plug it in, the TV starts direktly.
I ve no chance to get in the service menu.
How can I fix it.
Or how can I do a factory reset again?
Thank you

Same problem here.
UE40F6510SS with 2114:
OTN Setting in Service Menu not available -> blocked at router level
Watchdog disabled
installed SamyGO with following tutorial: viewtopic.php?f=63&t=7982
-> after 1-2 Minutes the remote stops working
only the file STOP_SAMYGO on the USB-Stick helped

I have no root Since the error

well in my case,
renaming
99_99_ChannInfoON.init
99_99_InfoBannerDuration.init
99_99_PVRAnyDev.init
99_99_SleepTimer.init
in /mnt/etc/init.d
did help!
thank you very much!!!

are these startup scripts important ones, or do i have i some cases disadvanteges?

One of them is known to cause crash on F-MST but I never remember which one
They're not essential at all, but only SamyGO features you can find as individual patches in F software section.

Pilzbier wrote:I have no root Since the error

Sorry, I have no solution against bad will