[App] libStreamTV E/F/H
Re: [App] libStreamTV E/F/H
Thanks for a well-detailed answer! I'm using VLC forgot to mention that sorry. I tried experimenting with bigger buffer but it didn't work. What did work however was start timeshift wait until stream stops then turn it off and both TV and stream started to work flawlessly. Thank you!
By the way /dtv is 40 MB on F as well. I moved the chunks to USB as you suggested as well and it works!
By the way /dtv is 40 MB on F as well. I moved the chunks to USB as you suggested as well and it works!
Re: [App] libStreamTV E/F/H
Well, I'm not sure I fully understand your "workaround" but it shouldn't be needed (looks at bit coercive, no? ). Same advice as above, to avoid problems, don't use VLC (there and in general ).
I do NOT receive any PM. Please use forum.
Re: [App] libStreamTV E/F/H
Hehe, I'm not sure I understand it myself. So what happens is that when I start timeshift playlist are created fine, chunks are coming in but at usually 19s it stops writing chunks. That's when I press Stop button on remote and it restarts somehow, playlist and chunks are created. I don't think there's any problem with your lib since it happens when recording straight to USB as well.
Edit: Only downside of this seems to be that I have to reboot/shutdown TV over telnet or pull the power cable to turn it off.
Edit: Only downside of this seems to be that I have to reboot/shutdown TV over telnet or pull the power cable to turn it off.
Re: [App] libStreamTV E/F/H
JanneP wrote:what happens is that when I start timeshift playlist are created fine, chunks are coming in but at usually 19s it stops writing chunks. That's when I press Stop button on remote and it restarts somehow, playlist and chunks are created.
You mean you have same problem (record stops itself) even without using libStreamTV at all?JanneP wrote:I don't think there's any problem with your lib since it happens when recording straight to USB as well.
That's called "TV crash", but no idea what's wrongJanneP wrote:Edit: Only downside of this seems to be that I have to reboot/shutdown TV over telnet or pull the power cable to turn it off.
I do NOT receive any PM. Please use forum.
Re: [App] libStreamTV E/F/H
Yeah, that's right.zoelechat wrote:You mean you have same problem (record stops itself) even without using libStreamTV at all?JanneP wrote:I don't think there's any problem with your lib since it happens when recording straight to USB as well.
Yep. TV works fine while streaming, it just won't respond to any remote control commands. My guess is that it's either have something to do with an EEPROM reset I had to do about a year ago or maybe something with the broadcast. Maybe neither I'm just speculating.zoelechat wrote:That's called "TV crash", but no idea what's wrongJanneP wrote:Edit: Only downside of this seems to be that I have to reboot/shutdown TV over telnet or pull the power cable to turn it off.
Re: [App] libStreamTV E/F/H
If you're on non-scrambled channel, it's expected TV "continues to work correctly" even if crashed. To know whether it's really crashed or not, check pidof exeTV and pidof exeAPP, if one (or both) returns nothing, it's "reliably crashed"
However if it continues to stream, it should mean it's NOT crashed. Know that streaming makes TV behave considerably slower, here if I don't touch remote for some time it can take up to 3-4 seconds to respond then (and better not hammer!). TV is obviously managing hard RAM
About your recording problem, just a thought: isn't your recording device *for example* some 'slow as hell to wake up' 3.5" HDD? Would make sense TV stops at some point if it simply can't write, and would explain both original and lib behaviors (in such case: try another device!)
However if it continues to stream, it should mean it's NOT crashed. Know that streaming makes TV behave considerably slower, here if I don't touch remote for some time it can take up to 3-4 seconds to respond then (and better not hammer!). TV is obviously managing hard RAM
About your recording problem, just a thought: isn't your recording device *for example* some 'slow as hell to wake up' 3.5" HDD? Would make sense TV stops at some point if it simply can't write, and would explain both original and lib behaviors (in such case: try another device!)
I do NOT receive any PM. Please use forum.
Re: [App] libStreamTV E/F/H
I tried to start/stop stream a few times but I couldn't make it "crash" again. I'll check if it does again. I noticed that streaming only resumes if I stop it once the 19s has passed If i wait too long it won't work.
I tried several USB flash memories and a USB HDD and recording stops at 19s or less never longer.
I tried several USB flash memories and a USB HDD and recording stops at 19s or less never longer.
Re: [App] libStreamTV E/F/H
Well, lib is not meant to fix recording problems you already have without it anyway. It catches stream being recorded: if TV records nothing it catches nothing, simple as that
I do NOT receive any PM. Please use forum.
Re: [App] libStreamTV E/F/H
working nicely on F series arm, very neat. about 10% increase in average CPU load.
PN60F8500AFXZA
T-FXPAKUC 1206.3 + SamyGO
"BrickMaster 2015"
T-FXPAKUC 1206.3 + SamyGO
"BrickMaster 2015"
Re: [App] libStreamTV E/F/H
Great Work zoelchat! Thank you!
You suggest to install/run libNoDRM due to resource consumtion...
Already done... Installed both libs and the init.d-scripts
But I think that "99_91_pvr_NoDRM.init" has to be executed first... After that "99_91_StreamTV.init"...?
Renaming the NoDRM to "99_90_pvr_NoDRM.init" should do the job in the correct order, Right?
PS:
Actually its not running for me, because I've got some problems with mounting a nfs share to my tv with the script from slodki at
https://forum.samygo.tv/viewtopic.php?f ... 767#p91675
But that's offtopic here.
You suggest to install/run libNoDRM due to resource consumtion...
Already done... Installed both libs and the init.d-scripts
But I think that "99_91_pvr_NoDRM.init" has to be executed first... After that "99_91_StreamTV.init"...?
Renaming the NoDRM to "99_90_pvr_NoDRM.init" should do the job in the correct order, Right?
Code: Select all
# ls -la /mnt/etc/init.d/
total 172
drwxr-xr-x 2 root 0 4096 Jan 1 00:26 .
drwxr-xr-x 10 root 0 4096 Aug 16 2014 ..
....................
-rwxr-xr-x 1 root 0 1165 Jan 1 00:39 99_91_StreamTV.init
-rwxr-xr-x 1 root 0 629 Jan 1 00:38 99_91_pvr_NoDRM.init
....................
PS:
Actually its not running for me, because I've got some problems with mounting a nfs share to my tv with the script from slodki at
https://forum.samygo.tv/viewtopic.php?f ... 767#p91675
But that's offtopic here.
UE46ES8090