SamyGO

Hi,

I'm looking for some help with setting Samsung 50J5000. I need that tv be always on. Switch itself on automatically after connecting to power outlet.
This is normal if tv was on and then disconnected from power, and then connected back again. But if switched to standby with remote, and then disconnected and connected again, it stays in standby, waiting for turn on signal from remote.
Or maybe some option to auto power on, even if standby signal received from remote. I want to use that tv in public and cannot have anybody to shut it down, with universal remote for example.
I thought about HDMI-CEC, but apparently, that model does not support anynet+.

Thanks,

you can cover IR blaster on TV with something and then anybody can't shut it down including you

this is what I was planing to do if nothing else is possible.

Thanks,

Possible you can do it by changing this option into service menu (->SVC->Other Settings):

This option turn TV on after power failure like when you cut electricity in socket and then you switch back to on.

id say micom power off

notengo13 wrote:This option turn TV on after power failure like when you cut electricity in socket and then you switch back to on.

Wasn't that part of question?

gauch wrote:Switch itself on automatically after connecting to power outlet.

From what I can understand I think he already knows that TV switch on

Switch itself on automatically after connecting to power outlet.
This is normal if tv was on and then disconnected from power, and then connected back again.

But if switched to standby with remote, and then disconnected and connected again, it stays in standby, waiting for turn on signal from remote.

If I understand this can be a question? Maybe some sheduled recording will help if that TV support PVR and sheduled recording switch TV on from standby.

zoelechat wrote:Possible you can do it by changing this option into service menu (->SVC->Other Settings):

I've checked in SVC menu, but there are only 3 options: Test pattern, Delete S/N and Panel display Time.
I'm calling service menu with Mute-1-8-2-power. Is there is different service menu?
If I could change it to something like "always on" will do what I want. Those TVs will be on switched power outlet, so power can be cycled when needed.

Not sure all models have such option... Check at least wiki for how to access "extended" service menu, might help to see more options