1. Wrong thread for your question
2. sounds like you are in service menu and try to access the hotel mode option without having hotel mode enabled in seperate hotel mode menu (mute119...)
Sent from my Zenithink ZT180v1 - ePad
Extended Service Menu after Enabling Hotel Mode
- beatfreak
- SamyGO Project Donor
- Posts: 591
- Joined: Tue Aug 23, 2011 9:03 am
- Location: Hamburg
- Contact:
Re: Extended Service Menu after Enabling Hotel Mode
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with
If you can't fix it using dvct tape, you are not using enough dvct tape.
FYI: you can close your ssh session with SamyGO with
Code: Select all
~.
Re: Extended Service Menu after Enabling Hotel Mode
Why ?? on this thread everyone is discussing the different options that can be enabled when enabling the extended service menu (PVR, 3D support, channel guide, etc), I don't see how asking about changing the region code on the extended service menu here is wrong.beatfreak wrote:1. Wrong thread for your question
Of course I did that, it's mentioned countless times on this thread.beatfreak wrote: 2. sounds like you are in service menu and try to access the hotel mode option without having hotel mode enabled in seperate hotel mode menu (mute119...)
Juancho
UN40C6500 TV
T-VALDTWC-1002.0 firmware
UN40C6500 TV
T-VALDTWC-1002.0 firmware
Re: Extended Service Menu after Enabling Hotel Mode
In any diference on service mod and extended service mode.
Can I turn this on 40ES6500? The wiki has service mode and extended service mode, but not how to enter each one.
Can I turn this on 40ES6500? The wiki has service mode and extended service mode, but not how to enter each one.
Re: Extended Service Menu after Enabling Hotel Mode
i have the same problem, it the Problem solved? please helpamuhasan wrote:Higanumor wrote:You could try to reset the TV to factory condition:amuhasan wrote:Hi I have a 40c650 and i have done a great mistake on service menu !!
after i have turned off and on the panel go unstable and it turns on and off every 10 sec !! and the bottons on the panel or remote donot work. non of them. even i cannot turn off the tv how can i fix this?
With the television on, hold down the EXIT button for 15 seconds until you're given the option to RESET the TV.
thank you for your consideration
but tv turn on and off automatic every 10 sec and tv panel bottons or remote bottons donot do anything
i cannot even turn off the tv!!!
Any Help will be greate
Re: Extended Service Menu after Enabling Hotel Mode
i have samsung c650 firmware t-valdeuc-3018.1 and i want enable pvr, when i go into "control"->"sub control" i haven't "PVR Support".
i have this screen
https://www.dropbox.com/s/3k75zcmem4vy1 ... 9.jpg?dl=0
i have this screen
https://www.dropbox.com/s/3k75zcmem4vy1 ... 9.jpg?dl=0
- beatfreak
- SamyGO Project Donor
- Posts: 591
- Joined: Tue Aug 23, 2011 9:03 am
- Location: Hamburg
- Contact:
Re: Extended Service Menu after Enabling Hotel Mode
on 3018.1 you need to send the special remote buttons FACTORY and 3SPEED to enable extende service menu.
there are several methods to do this ( programmable IR, IR-didodes on audio out, LAN-control...)
there are several methods to do this ( programmable IR, IR-didodes on audio out, LAN-control...)
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with
If you can't fix it using dvct tape, you are not using enough dvct tape.
FYI: you can close your ssh session with SamyGO with
Code: Select all
~.
Re: Extended Service Menu after Enabling Hotel Mode
any tutorial please?beatfreak wrote:on 3018.1 you need to send the special remote buttons FACTORY and 3SPEED to enable extende service menu.
there are several methods to do this ( programmable IR, IR-didodes on audio out, LAN-control...)