UE55ES8090 Service menu
-
- SamyGO Project Donor
- Posts: 55
- Joined: Thu Oct 29, 2015 4:11 pm
UE55ES8090 Service menu
Can someone Share the Service menu values for ue55es8090?
Re: UE55ES8090 Service menu
It`s for 40inch, but same goes for 55inch as well.zoelechat wrote: ↑Tue Dec 08, 2015 12:34 am http://ctrlv.it/arm/3293/3158348506
UE40ES8000, T-ECPDEUC-2003.4
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: UE55ES8090 Service menu
I told him this already via pm. He asked me. But now it looks like he's searching for replacement Mainboard...
Those a my settings from factory tool
Those a my settings from factory tool
TV: UE40ES7000 @ UE40ES8090 - T-ECPDEUC-2022.0 // SamyGO
CI+: Unicam EVO 4 with HD+ (HD02) @ Pacific 4.60
NET: Samba: PC
CI+: Unicam EVO 4 with HD+ (HD02) @ Pacific 4.60
NET: Samba: PC
-
- SamyGO Project Donor
- Posts: 55
- Joined: Thu Oct 29, 2015 4:11 pm
Re: UE55ES8090 Service menu
Will try to take most of settings
Re: UE55ES8090 Service menu
Please report if eprom reset works for you.
TV: UE40ES7000 @ UE40ES8090 - T-ECPDEUC-2022.0 // SamyGO
CI+: Unicam EVO 4 with HD+ (HD02) @ Pacific 4.60
NET: Samba: PC
CI+: Unicam EVO 4 with HD+ (HD02) @ Pacific 4.60
NET: Samba: PC
-
- SamyGO Project Donor
- Posts: 55
- Joined: Thu Oct 29, 2015 4:11 pm
Re: UE55ES8090 Service menu
Cant reset my eeprom. When i stick the two pins, tv will turn off allways. When i release the pins then tv will start normally...
Re: UE55ES8090 Service menu
I guess it's not correct. If I'm not wrong connect first, then press power button for longer time .... Please read wiki again....
Maybe you need a third hand for this
From wiki:
Join VCC and SDA, power on TV and hold about for 20 seconds with the TV powered. It just try to read (wrong) settings from EEPROM, since it cannot read anything (refer to the warning message bellow), just start with defaults. That is what we want. Than releasing SDA line and shutting TV off will update the settings on EEPROM with null values, that TV could boot with it. After all, you can enter service menu and change the required changes.
Maybe you need a third hand for this
From wiki:
Join VCC and SDA, power on TV and hold about for 20 seconds with the TV powered. It just try to read (wrong) settings from EEPROM, since it cannot read anything (refer to the warning message bellow), just start with defaults. That is what we want. Than releasing SDA line and shutting TV off will update the settings on EEPROM with null values, that TV could boot with it. After all, you can enter service menu and change the required changes.
TV: UE40ES7000 @ UE40ES8090 - T-ECPDEUC-2022.0 // SamyGO
CI+: Unicam EVO 4 with HD+ (HD02) @ Pacific 4.60
NET: Samba: PC
CI+: Unicam EVO 4 with HD+ (HD02) @ Pacific 4.60
NET: Samba: PC
-
- SamyGO Project Donor
- Posts: 55
- Joined: Thu Oct 29, 2015 4:11 pm
Re: UE55ES8090 Service menu
Yes i did it like this but i didnt get any messages with warning or something like that. When i press the both pins and turning tv on, tv will turn off several times