SamyGO

Hello everyone, I'm french. Sorry for my bad english (Google Trad)!

for several weeks, my TV Samsung UE46C6000 was struggling to start (several click clack)
Today I have the message on the screen "main board has been changed. please go into service mode and setup below option .....
i want change setting in the hidden menu but "local set "," model "and" country "are gray .
I have" EDID Fail "and he sees a model" UE46C7700 ".
please help, thank you very much

Hey.
The same thing happened on my TV.
Set the option EDID = ON then select EDID WRITE ALL

hi, thanks you for your answer
i will try this !
i dont see the pictures !

I do not understand why the photos are not visible.
I will explain in words.
Try in the menu "EDID" perform the item "EDID WRITE ALL". If after the word "wait" the message "fail" or something like that appears, the motherboard does not correspond to the UE46C7700 model.
If after the word "wait" the message "successful" appears, then everything is fine!
------------------------
Note: to enter the service menu, turn off the TV, then quickly press on the remote control of your TV the next sequence INFO-MENU-MUTE-POWER

Well if the message "Mainbaird changed" appeared without you doing anything along with problems while booting then your Mainboard does not have a bright future. If youre lucky you can find a replacement Mainboard for UExxC6500 or C6800 these should fit for you and give you the upgrade for PVR/Timeshift

hello to all, i come back ....
I repaired the power supply card after the clic / clac problem (2 big capacitor and 2 voltage regulators)
However, I still have an edid error and the famous message "main board has been changed. setup below option .....
i want change setting in the hidden menu but "local set", "model" and "country" are gray.
if I go to the EDID menu and validate, nothing happens. can you help me.
thank you very much

nota: all electronics cards are originals (no buy after)

beatfreak wrote: ↑Fri Dec 28, 2018 11:44 am Well if the message "Mainbaird changed" appeared without you doing anything along with problems while booting then your Mainboard does not have a bright future. If youre lucky you can find a replacement Mainboard for UExxC6500 or C6800 these should fit for you and give you the upgrade for PVR/Timeshift

thanks, do you think the mainboard is out of order because i had a problem on power supply ?

its at least possible that your faulty power supply did some damage to those eeproms

Eeprom could be easy replaced. Worth to try. All what you need is moderate soldering skills and new atmel chip.

juusso wrote: ↑Sat Jan 19, 2019 7:38 am and new atmel chip.

will the mainboard be able to flash the new chip with data on its own?