UE65H6470 Firmware Problems (UEErH6470 after downgrade)
Posted: Wed Apr 24, 2019 8:59 pm
Good evening guys.
I've bought a used UE65H6470 for our livingroom. UE65H6470 also hast T-MST Software like my UE48H6470 in the bedroom. I thought it won't be the problem to downgrade the 2880 FW on it to 0000 an then to 2130 to do the Skype-replacement root and install oscam on it.
But I get extreme problems... After downgrade to 0000 the Samy doesn't know its size any longer. At "contact Samsung" the Modell is shown as UEErH6470 (Error) and in service menu the Panel is shown as "Error" instead of "65L1AF0VJ" (was shown at 2880 in service menu).
Also the TV-Picture was shown nearly complete in red colors (i think because the TV don't know which Panel to use).
After that I upgraded the FW to 2130 but without any change...
Then I'll tried some FWs above 2130 to see at which FW the TV reknews it's size. Thats the fact with FW >2700.
With T-MST14DEUC-2750 I've rooted the TV with the network root (worked good so far) and installed oscam like i did on the UE48H6470.
Oscam starts after 3-4min (not soooo fast, but acaptable), but if I switch to an encoded channel, the TV crashs/freezes and only remove the power cord helps to reboot it...
Does anybody know what to do to get the Panel/Size recognized under FW 2130 or what I can do to get oscam running with FW >2700 & <2790 ???
For now TV is on T-MST14DEUC-2750 and Sub-Micom-Version T-MST14DEUS-1008, but wothout root & oscam (my UE48H6470 is also on 1008, the UE32H6470 in buero is on 1009, both with FW2130 and oscam 11517 running).
EDIT1:
Auto-FW-Update is blocked in router and also OTN is disabled in each TV.
I've bought a used UE65H6470 for our livingroom. UE65H6470 also hast T-MST Software like my UE48H6470 in the bedroom. I thought it won't be the problem to downgrade the 2880 FW on it to 0000 an then to 2130 to do the Skype-replacement root and install oscam on it.
But I get extreme problems... After downgrade to 0000 the Samy doesn't know its size any longer. At "contact Samsung" the Modell is shown as UEErH6470 (Error) and in service menu the Panel is shown as "Error" instead of "65L1AF0VJ" (was shown at 2880 in service menu).
Also the TV-Picture was shown nearly complete in red colors (i think because the TV don't know which Panel to use).
After that I upgraded the FW to 2130 but without any change...
Then I'll tried some FWs above 2130 to see at which FW the TV reknews it's size. Thats the fact with FW >2700.
With T-MST14DEUC-2750 I've rooted the TV with the network root (worked good so far) and installed oscam like i did on the UE48H6470.
Oscam starts after 3-4min (not soooo fast, but acaptable), but if I switch to an encoded channel, the TV crashs/freezes and only remove the power cord helps to reboot it...
Does anybody know what to do to get the Panel/Size recognized under FW 2130 or what I can do to get oscam running with FW >2700 & <2790 ???
For now TV is on T-MST14DEUC-2750 and Sub-Micom-Version T-MST14DEUS-1008, but wothout root & oscam (my UE48H6470 is also on 1008, the UE32H6470 in buero is on 1009, both with FW2130 and oscam 11517 running).
EDIT1:
Auto-FW-Update is blocked in router and also OTN is disabled in each TV.