SamyGO

https://imgur.com/a/0MQcxOD

Currently trying to re-set eprom. Hopefully I'm connecting those right?

I can see the logo, then the connect source can make 2 moves then it re starts. In this time I can very briefly enter menus but have no real time to do anything.

After I do the eprom thing, the menus are still Swedish, isn't that suppose to reset to English?

Disconnecting the main board keeps the TV from restarting.

https://imgur.com/a/kmOF7Z9

Dose this isolate the issue to the main board?

I also read about, when reseting eprom, there is suppose to be a white flash then a restart. I do not get this flash if whitnes

I mange to make a factory reset using the service menu. Still no go.

Nand flash seem to be the next logical step.
https://youtu.be/xvngO0oENG4

This video on YouTube show very similar error. Now to find someone to do this as I do not intend to buy a device for several 100$ that I only use two times.

Bought a nand flash of ebay, with software pre-installed.

https://rover.ebay.com/rover/0/0/0?mpre ... 3534917728

Will report back, it has to be sent from us to Sweden. So it will take some time. But I will be back.

Thanks for posting and sorry you`re left alone with your problem. Can you describe what caused your bootloop? If failed sowtware upgrade, then replacing soc eeprom won`t help.

juusso wrote: ↑Mon Jun 10, 2019 3:29 pm Thanks for posting and sorry you`re left alone with your problem. Can you describe what caused your bootloop? If failed sowtware upgrade, then replacing soc eeprom won`t help.

Bought the TV second hand, she told me one day it just stopped working like this. Boots then about 10 seconds after the logo in it boot loops.

Bought a new nand chip that is soon here. Hope that will work.
It is said to be pre programed.

But, which settings should I backup from factory settings if somthing goes wrong. I have time to enter them but not for long.

it must work even with empty eeprom. No need for backuping something extra.

I remember reading somthing about setting up font color and other settings. Can't find it though.

Those settings you will be asked to enter on successful boot. If such occurs.