How to disable Bluetooth with NEO QLED (2021)
How to disable Bluetooth with NEO QLED (2021)
Hello everyone,
I think this forum which is impressive have Samsung TVs experts who could tell me a way to solve my problem.
I just bought NEO QLED 50QN90A (2021).
Before, a samsung "expert" (on samsung.com by live chat) told me we will be able to disable WIFI and Bluetooth in the TV menu.
But this was a lie, and now I am still searching a solution because my wife is electrosensitive and bluetooth, WIFI, etc give her health problems (first, headaches) everytime.
When this TV is ON or even in sleep mode, it keeps sending Bluetooth radio waves continuously.
I am sure this is Bluetooth and not WIFI and the TV Bluetooth name is detectable.
My Cornet ED88TPlus is measuring 2.4GHz microwaves with 2V/m.
----------------------------------------------------------------------------------------------------------------------------
WIFI can be disable in the menus and I use a ethernet connection (ok).
It is also possible to use an IR remote to control the TV (ok).
But I disabled all others options in the menu without success, trying to disable the Bluetooth.
I do not know if this is related to :
- SmartThings (though I don't use it)
- a bixby server
- the communication with the smart remote (to get the loading level?) but my smart remote is not appaired.
----------------------------------------------------------------------------------------------------------------------------
I found a way to go to the service mode : (tv in sleep mode) Info, Menu, Mute, Power
An "Advanced" submenu can be shown selecting "CAL DATA RESTORE", but this menu is empty.
On the main menu, when I click on 1234 with the IR remote; I think it is unlocking something because the selection rectangle is moving to "Option".
Some settings I saw in the secret menu are:
BT ADDRESS: xx.xx.xx.xx.xx.xx (can not be changed)
BT DUT : ON/OFF (did not try to change it, at the moment)
bixby server : prod/dev/dm1/dm2/dm3/dm4/pre/stg_us/stg_eu (did not try to change it, at the moment)
OTA support : general/OFF
OTN Support : ON (greyed out)
BT Non-Discoverable : ON/OFF
I changed without success :
OTA support : general > OFF
BT Non-Discoverable : OFF > ON (when the tv is in sleep mode, the TV is not found during a Bluetooth search but there is always Bluetooth radio waves)
I know that in previous samsug TV, there were options like :
Voice Recognition : ON/OFF
Network Support : NONE/wifi_int
BT Support : ON/OFF
BT_AUDIO_ON_OFF : ON/OFF
Simple IR Remote Control : ON/ON
Samsung Smart Control : ON/OFF
BLE (BT low energy) : ON/OFF
It seems that these options do not exist in NEO QLED or are hidden in the service menu.
Do you know a way to really disable the Bluetooth on NEO QLED ?
Regards
I think this forum which is impressive have Samsung TVs experts who could tell me a way to solve my problem.
I just bought NEO QLED 50QN90A (2021).
Before, a samsung "expert" (on samsung.com by live chat) told me we will be able to disable WIFI and Bluetooth in the TV menu.
But this was a lie, and now I am still searching a solution because my wife is electrosensitive and bluetooth, WIFI, etc give her health problems (first, headaches) everytime.
When this TV is ON or even in sleep mode, it keeps sending Bluetooth radio waves continuously.
I am sure this is Bluetooth and not WIFI and the TV Bluetooth name is detectable.
My Cornet ED88TPlus is measuring 2.4GHz microwaves with 2V/m.
----------------------------------------------------------------------------------------------------------------------------
WIFI can be disable in the menus and I use a ethernet connection (ok).
It is also possible to use an IR remote to control the TV (ok).
But I disabled all others options in the menu without success, trying to disable the Bluetooth.
I do not know if this is related to :
- SmartThings (though I don't use it)
- a bixby server
- the communication with the smart remote (to get the loading level?) but my smart remote is not appaired.
----------------------------------------------------------------------------------------------------------------------------
I found a way to go to the service mode : (tv in sleep mode) Info, Menu, Mute, Power
An "Advanced" submenu can be shown selecting "CAL DATA RESTORE", but this menu is empty.
On the main menu, when I click on 1234 with the IR remote; I think it is unlocking something because the selection rectangle is moving to "Option".
Some settings I saw in the secret menu are:
BT ADDRESS: xx.xx.xx.xx.xx.xx (can not be changed)
BT DUT : ON/OFF (did not try to change it, at the moment)
bixby server : prod/dev/dm1/dm2/dm3/dm4/pre/stg_us/stg_eu (did not try to change it, at the moment)
OTA support : general/OFF
OTN Support : ON (greyed out)
BT Non-Discoverable : ON/OFF
I changed without success :
OTA support : general > OFF
BT Non-Discoverable : OFF > ON (when the tv is in sleep mode, the TV is not found during a Bluetooth search but there is always Bluetooth radio waves)
I know that in previous samsug TV, there were options like :
Voice Recognition : ON/OFF
Network Support : NONE/wifi_int
BT Support : ON/OFF
BT_AUDIO_ON_OFF : ON/OFF
Simple IR Remote Control : ON/ON
Samsung Smart Control : ON/OFF
BLE (BT low energy) : ON/OFF
It seems that these options do not exist in NEO QLED or are hidden in the service menu.
Do you know a way to really disable the Bluetooth on NEO QLED ?
Regards
Re: How to disable Bluetooth with NEO QLED (2021)
Maybe you need to access Extended Service Menu to show up some more options. Or the best way is to disconnect Bluetooth/Wi-Fi modul from mainboard, but for this you need to open back of your TV
UE48H6640 T-MST14DEUC 2781.0 root latestH --> 2130.0 skypeRoot-->0000-->2115.3 "Skype refueled" Root
QE55QN93A - - >firmware T-NKM2DEUC-1805.4 (backup 1590.0) - - >update CURL60 Error --> CURL28 Error
QE55QN93A - - >firmware T-NKM2DEUC-1805.4 (backup 1590.0) - - >update CURL60 Error --> CURL28 Error
Re: How to disable Bluetooth with NEO QLED (2021)
Hello notengo13,
thank you for your help
I don't know how to go to extended service menu.
I tried to send FACTORY+3SPEED with my Logitech Harmony Remote but when I send FACTORY or 3SPEED in service menu, it runs a kind of test and the screen shows a full screen with the same color (blue, red, green).
I think my Harmony has good settings because I can open the service menu (when the tv is on) with INFO + FACTORY.
I think this is not possible to easily solve my problem with a hardware solution because in my TV, there is a card which manages IR/BT/WIFI.
It can be seen page 33 of this documentation (sorry, in french) :
https://downloadcenter.samsung.com/cont ... AAx-50.pdf
If this card is disconnected, the IR will no more operate
thank you for your help
I don't know how to go to extended service menu.
I tried to send FACTORY+3SPEED with my Logitech Harmony Remote but when I send FACTORY or 3SPEED in service menu, it runs a kind of test and the screen shows a full screen with the same color (blue, red, green).
I think my Harmony has good settings because I can open the service menu (when the tv is on) with INFO + FACTORY.
I think this is not possible to easily solve my problem with a hardware solution because in my TV, there is a card which manages IR/BT/WIFI.
It can be seen page 33 of this documentation (sorry, in french) :
https://downloadcenter.samsung.com/cont ... AAx-50.pdf
If this card is disconnected, the IR will no more operate
Re: How to disable Bluetooth with NEO QLED (2021)
Try using this app if you have smartphone with built-in IR
Samsung TV Service Remote Control
PRESS S1 (INFO) + S2 (FACTORY)
And check this I don't speak French but I can understand it has BT/Wi-Fi module Where did you get this service manual? Are there more complet manuals for neo qled 2021?
Samsung TV Service Remote Control
PRESS S1 (INFO) + S2 (FACTORY)
And check this I don't speak French but I can understand it has BT/Wi-Fi module Where did you get this service manual? Are there more complet manuals for neo qled 2021?
You do not have the required permissions to view the files attached to this post.
UE48H6640 T-MST14DEUC 2781.0 root latestH --> 2130.0 skypeRoot-->0000-->2115.3 "Skype refueled" Root
QE55QN93A - - >firmware T-NKM2DEUC-1805.4 (backup 1590.0) - - >update CURL60 Error --> CURL28 Error
QE55QN93A - - >firmware T-NKM2DEUC-1805.4 (backup 1590.0) - - >update CURL60 Error --> CURL28 Error
Re: How to disable Bluetooth with NEO QLED (2021)
Here you can find part number of wifi module which is BN59-01368A
UE48H6640 T-MST14DEUC 2781.0 root latestH --> 2130.0 skypeRoot-->0000-->2115.3 "Skype refueled" Root
QE55QN93A - - >firmware T-NKM2DEUC-1805.4 (backup 1590.0) - - >update CURL60 Error --> CURL28 Error
QE55QN93A - - >firmware T-NKM2DEUC-1805.4 (backup 1590.0) - - >update CURL60 Error --> CURL28 Error
Re: How to disable Bluetooth with NEO QLED (2021)
Thank you,
I have found the service manual in this web page :
https://www.samsung.com/fr/support/mode ... #downloads
I will try again INFO + FACTORY with my harmony remote and I will take photos of service menus.
I have found the service manual in this web page :
https://www.samsung.com/fr/support/mode ... #downloads
I will try again INFO + FACTORY with my harmony remote and I will take photos of service menus.
Re: How to disable Bluetooth with NEO QLED (2021)
Thank you for the hint.cedricc wrote: ↑Sun Dec 12, 2021 9:04 pm Thank you,
I have found the service manual in this web page :
https://www.samsung.com/fr/support/mode ... #downloads
I will try again INFO + FACTORY with my harmony remote and I will take photos of service menus.
I never tought Samsung will publish such information on their web. They are progressing forward
It's good to know for "people" (brother-in-law, kids, friends, wife's, kids friends) which enter to service menu and change accidentally Panel TYPE and then later, they are looking all over the web desperately to find out which one is correct.
UE48H6640 T-MST14DEUC 2781.0 root latestH --> 2130.0 skypeRoot-->0000-->2115.3 "Skype refueled" Root
QE55QN93A - - >firmware T-NKM2DEUC-1805.4 (backup 1590.0) - - >update CURL60 Error --> CURL28 Error
QE55QN93A - - >firmware T-NKM2DEUC-1805.4 (backup 1590.0) - - >update CURL60 Error --> CURL28 Error
Re: How to disable Bluetooth with NEO QLED (2021)
Hello,
I took photos of the service menu (opened with INFO + FACTORY).
I have already changed :
OTA support : general > OFF
BT Non-Discoverable : OFF > ON
INSTANT ON : ON > OFF
ALWAYS INSTANT ON SUPPORT : ON > OFF
In the main MENU, FMS and Advanced are empty.
I took photos of the service menu (opened with INFO + FACTORY).
I have already changed :
OTA support : general > OFF
BT Non-Discoverable : OFF > ON
INSTANT ON : ON > OFF
ALWAYS INSTANT ON SUPPORT : ON > OFF
In the main MENU, FMS and Advanced are empty.
You do not have the required permissions to view the files attached to this post.
Re: How to disable Bluetooth with NEO QLED (2021)
You do not have the required permissions to view the files attached to this post.
Re: How to disable Bluetooth with NEO QLED (2021)
You do not have the required permissions to view the files attached to this post.