I was able to get a log from it (attached here), but when i enter the code given on the samygo wiki (20154638 and then 20089999) into the shell, it doesnt do anything!
Code: Select all
P�-�H�H��ѵup
1 T 8 R AAR 1203 1207 (May 7 2015-19:20:47) N S003 0
SECOS[1]
0020.21
Kernel[1]
DTB[1]
C[6] O[O] B[X]
E[4]
Loading Kernel Done..
[0-0.0000] sdp_clk_register_fixed_div: failed to register clock emac_clk
[0-0.0003] [VDLP] preset_lpj manual set to 98304
[1-0.0288] [VDLP] preset_lpj manual set to 98304
[2-0.0366] [VDLP] preset_lpj manual set to 98304
[3-0.0445] [VDLP] preset_lpj manual set to 98304
[2-0.0624] sdp-uart-micom 190ac0.serial: device3 did not registered completely
[0-0.1113] netif_napi_add() called with weight 256 on device eth%d
[0-0.1493] type=2000 audit(0.144:1): initialized
[2-0.1878] sdp_cpufreq_init: failed to get cpu regulator
[2-0.2004] ================================================================================
[2-0.2070] SAMSUNG VDLP Kernel
[2-0.2099] Version : 0156, release
[2-0.2131] Platform information : 191104, DTV, Hawk.M-Tizen, release, HawkAll_ATSC_RCA
[2-0.2209] ================================================================================
[2-0.2785] vdfs3
Checking system bus transport...
Kdbus system bus found!
[0-0.4245] vdfs3
FP_NVRAM_FASTBOOT_IN_PRODUCTION [1]
factory production mode
Production mode
vconf-init start
[FB:INIT] fast init start
[FB:INIT] drviver path is [/lib/modules/3.10.30/kernel]
[FB:INIT] fi_util_mq_create: name(/fb_init_mq)
[3-0.5873] vdfs3l_mq_create: name(/fb_logo_mq)
[FB:INIT] fi_util_mq_create: name(/fb_video_mq)
[FB:INIT] fi_util_mq_create: name(/fb_sbb_mq)
[FB:INIT] init mutex
[2-0.6608] kfactory_drv_api mod ld(0xbe400000)
[1-0.6784] kfactory_drv mod ld(0xbe403000)
[FB:INIT] load_drivers_insmod thread end(11)
[FB:INIT] fl_callback_driver
[2-0.7026]
[2-0.7026] TZTV MEDIA version : tztv-media-hawkm-atsc-rca-170201
[0-0.7269] tztv_tuner_drv_atsc mod ld(0xbe41f000)
[3-0.7637] sdp-i2c 1901a0.i2c: [i2c fail] CH:5 Device ID:0x80 incomplete xfer (-6)
[0-0.9638] sdp_fw mod ld(0xbe4c9000)
[FB:INIT] load_drivers_insmod thread end(12)
[FB:INIT] fl_callback_driver
[FB:INIT] fl_callback_driver: not handling(12)
- same version : T-HKMAKUC-1560.0
[kfactoryd] KfactoryD_Main(v0.8)..
child process: 306
[2-1.0367] This is NOT BOE panel!(65A1UU8QJ)
[2-1.0394] sdp_logo mod ld(0xbe418000)
[1-1.0402] [ERROR] menu number 34 is already reserved.
[1-1.0415] --[set_tsd_clk_enable]getting function...[-6]
[1-1.0422] --[set_tsd_clk_enable]getting function...[-6]
[1-1.0578] sdp_codec mod ld(0xbe8ee000)
[FB:INIT] load_drivers_insmod thread end(8)
[FB:INIT] fl_call[3-1.0676] [sdp_logo_dp_lvds_set][282] lvds format reg 0x101
[0-1.0715] sdp_extin mod ld(0xbe8db000)
back_driver
[FB:INIT] fi_util_mq_send_cmd: cmd(108)
[FB:INIT] load_drivers_usb start
[1-1.0924] usb_common mod ld(0xbe416000)
[2-1.0999] [ERROR] menu number 15 is already reserved.
[FB:INIT] load_dri[2-1.1085] [ERROR] menu number 15 is already reserved.
vers_insmod thre[2-1.1142] [ERROR] menu number 15 is already reserved.
[2-1.1200] [ERROR] menu number 15 is already reserved.
ad end(3)
[FB:INIT] fl_callback[2-1.1275] tztv_frc_tcon_api mod ld(0xbe962000)
[2-1.1320] [ERROR] menu number 15 is already reserved.
[2-1.1367] sdp_tsd mod ld(0xbe91c000)
_driver
[FB:INIT] fi_util_mq_send_cmd: cmd(104)
[kfactoryd] set_node_labeling done(ret:0)..
[FB:INIT] load_drivers_insmod thread end(1)
[FB:INIT] fl_callback_[1-1.1540] tztv_audio_amp_api mod ld(0xbe97f000)
driver
[FB:INIT[0-1.1595] create_run_kthread kthread_run executing for thread name user_port_thread
] fi_util_mq_sen[1-1.1689] usbcore mod ld(0xbe9db000)
d_cmd: cmd(102)
[3-1.1756] tztv_tuner_atsc mod ld(0xbe4c1000)
[1-1.1756] [T2D_DBG] [sdp_alsa_amp] enter tztv_amp_serdes_lock_check
[FB:INIT] load_drivers_insmod thread end(6)
[FB:INIT] fl_callback_driver
[FB:INIT] fi_ut[3-1.1926] mali mod ld(0xbea10000)
il_mq_send_cmd: cmd(106)
[1-1.2073] usb usb1: SerialNumber: 500000.ehci
[0-1.2089] hawkuft_tcon mod ld(0xbebe0000)
[3-1.2116] frc hawk-uft
[1-1.2205] sdp_hdmi mod ld(0xbeb71000)
[1-1.2273] usb usb2: SerialNumber: 510000.ehci
[1-1.2394] usb usb3: SerialNumber: 520000.ehci
[3-1.2430] sdp_audio_aio_i2stx_start I2S[0] SET SCART CHANNEL
[0-1.2507] hawkuft_frc mod ld(0xbed96000)
[1-1.2514] usb usb4: SerialNumber: 530000.ehci
[3-1.2579] hawk-uft init check[OK],val[0x2],retry[0]
[1-1.2584] ehci_hcd mod ld(0xbebd4000)
[1-1.2788] tztv_hdmi_switch_api mod ld(0xbedae000)
[0-1.2833] usb usb5: SerialNumber: 400000.xhci
[1-1.2865] sdp_alsa mod ld(0xbebf8000)
[0-1.2903] usb usb6: SerialNumber: 400000.xhci
[0-1.2947] xhci_hcd mod ld(0xbede9000)
[0-1.3150] tztv_hdmi_switch mod ld(0xbedfd000)
[1-1.3396] tztv_jackident mod ld(0xbef28000)
[FB:INIT] load_drivers_insmod thread end(5)
[FB:INIT] fl_callback_driver
[FB:INIT] fi_util_mq_send_cmd: cmd(105)
[FB:INIT] error: ssetxattr /dev/snd/by-path
[FB:INIT] load_drivers_insmod thread end(10)
[0-1.3715] usb usb7: SerialNumber: 508000.ohci
[3-1.3775] This is NOT BOE panel!(65A1UU8QJ)
[3-1.3851] sdp_drm mod ld(0xbee0a000)
[FB:INIT] load_drivers_insmod thread end(2)
[3-1.4198] [T2D_DBG] [sdp_alsa_amp] @tztv_amp_init time(244 ms)
[3-1.4245] tztv_audio_amp mod ld(0xbeb6a000)
[FB:INIT] load_drivers_insmod thread e[0-1.4313] usb usb8: SerialNumber: 518000.ohci
nd(0)
[FB:INIT] fl_callback_driver
[FB:INIT] fi_util_mq_send_cmd: cmd(101)
Started Xorg[400]WARNING: Xorg is setuid root - bummer.starting X server with: "/usr/bin/Xorg :0 -nolisten tc)
[FB:INI[0-1.4953] usb usb9: SerialNumber: 528000.ohci
T] FRC/TCON driver insmod: SBB is not connected. insmod frc tcon[FB:INIT] load_drivers_insmod thread end(9)
[FB:INIT] fl_callback_driver
[FB:INIT] fi_util_mq_send_cmd: cmd(103)
[FB:INIT] fi_util_mq_send_cmd: cmd(103)
[0-1.5593] usb usb10: SerialNumber: 538000.ohci
[0-1.5628] ohci_hcd mod ld(0xbee03000)
[0-1.5816] usb_storage mod ld(0xbef2d000)
[0-1.5929] of_node Name = usben
[0-1.5943] of_node Type = <NULL>
[0-1.5975] usb_enable mod ld(0xbef39000)
1.6149 [XSERVER] start of main)
[0-1.6460] tzdev mod ld(0xbef3d000)
[0-1.6547] sdp_logo mod uld(0xbe418000)
VCONF START
[3-1.6853] zram mod ld(0xbef45000)
[0-1.7363] ssdev mod ld(0xbef4c000)
[3-1.7913] usb 2-1: new high-speed USB device number 2 using sdp-ehci
[FB ] fastvideo start
[3-1.8035] [ft_set_inverter][off][flag:0][pid:477,fb_do_inmute_pr]
[3-1.8175] usb 2-1: SerialNumber: 000000000001
[3-1.8217] create_run_kthread kthread_run executing for thread name instant thread
[3-1.8298] create_run_kthread kthread_run executing for thread name instant thread
/dev/dri/card0 found
/dev/dri/card1 found
[libtbm:400] bufmgr init: fd=13
[libtbm:400] TBM module hawkm: vendor="Samsung" ABI=1,0
[libtbm:400] cache_crtl:BACKEND lock_crtl:BACKEND
[libtbm:400] Success to load module(libtbm_default.so)
[libtbm:400] create tizen bufmgr: ref_count:1
[ave_tcon_api_start_monitor] Monitor Start
Create TDsTconMonitor..
[XSERVER] oom_score_adj: /proc/400/oom_score_adj, score_value: -1000
(II) [ 2.032][XDBG][xDbgModuleParseOptions] dlog: "off"
(II) [ 2.033][XDBG][xDbgModuleParseOptions] drv's log path: "/var/log/Xorg.0.log"
(II) [ 2.033][XDBG][xDbgModuleParseOptions] evlog path: none
(II) [ 2.033][XDBG][xDbgModuleParseOptions] evlog log path: none
[vendor-config] network_type[Wireless]
WiFi -> true
Wired -> false
3G -> false
Error: could not load module /lib/modules/3.10.30/kernel/drivers/input/evdev.ko: No such file or directory
Set MAC Address of eth0 [XX:XX:XX:XX:XX:XX][system-info] SYSTEM_INFO_WIFI_VENDOR_BRCM
[systme-info] wifi region from factory : 18
[vendor-config] vendor type --> 3
[vendor-config] region type --> 18
[vendor-config] network type --> 5
[vendor-config] Started to load Wifi Drivers
[vendor-config] vendor=BroadCom Combo country=US/160 channel=48
[2-2.2670] cfg80211 mod ld(0xbef52000)
[3-2.2713] usb 7-1: new full-speed USB device number 2 using sdp-ohci
[1-2.3506] brcm_mem mod ld(0xbe41a000)
[3-2.4092] [dhd_module_init:8800] BRCM Wi-Fi Driver Init started from here.
[3-2.4197] [dbus_usbos_probe:1565] BRCM Wi-Fi Driver Enter dbus_usbos_probe.
[3-2.4306] BRCM Wi-Fi Driver version : BRCM43569_1.201.58_160711_ADDED_DEFENCE_CODE_DURING_CONNECTION
2.4471 [XSERVER] Success(/tmp/xorg_ready)
[X_PRINT][X_INF[0-2.5120] create_run_kthread kthread_run executing for thread name instant thread
ORMATION][XOpenDisplay][Line :604] XInitThreads [0-2.5236] create_run_kthread kthread_run executing for thread
not called by Process Name:/usr/bin/xorg-launch-helper ProcessId:246 before first XOpenDisplay call
** (process:544): WARNING **: signal "power_on" (from "PowerOn") exported but not found in object class "Netc"
[3-2.6640] [HdmiSw][SetDependence]ERR : Not Available Hdmi Switch...
[1-2.6698] [ft_dpms_on][pid:548,system_server]
[3-2.6850] [ft_set_inverter][on][flag:1][pid:477,fb_do_inmute_pr]
[0-2.7039] usb 7-1.1: new full-speed USB device number 3 using sdp-ohci
To start wlan0
[SBH] get_boot_reason is (1)
[SBH] create boot mode file(/tmp/normal_mode)
[SBH] bw_get_boot_mode() call
[SBH] bw_get_boot_mode() [0-2.8163] create_run_kthread kthread_run executing for thread name instant thread
[xorg-launch-helper] platformlog flag[0]
[0-2.8962] usb 7-1.2: new full-speed USB device number 4 using sdp-ohci
AVOC START
[1-3.0202] create_run_kthread kthread_run executing for thread name instant thread
[1-3.1000] usb 7-1.3: new full-speed USB device number 5 using sdp-ohci
[CoreGL] <306> (Sat Nov 5 04:36:54 UTC 2016) Library initializing...[1-3.2180] usb 7-1.3: SerialNumber: FC8C
[1-3.2226] create_run_kthread kthread_run executing for thread name instant thread
[2-3.2453] Wi-Fi wlan interface is up
[2-3.2480] bcmdhd mod ld(0xbef7a000)
[vendor-config] /sbin/insmod /lib/modules/wifi/bcmdhd.ko firmware_path=/lib/modules/wifi/43569a0.bin.trx nvra0
[vendor-config] BRCM Combo Wi-Fi Driver Loaded
[vendor-config] Network Support Wired
[vendor-config] Successfully loaded Wi-Fi Drivers
[CoreGL] Driver GL version 2.0
-> Completed
[CoreGL] <Fastpath> : (0) Default API path enabled...
[1-3.4277] [__wl_cfg80211_scan:2785] Legacy : SCAN is triggered.
[tv-viewer]Init Mode[1]
/bin/sh: insmod: command not found
[1-3.7707] [wl_escan_handler:11793] Legacy SCANNING STATUS IS COMPLETED
[1-4.0337] 3G Dongle Port set to 1
[1-4.0442] USB Enabled GPIO set to 1
[FB:INIT] excuted /usr/sbin/vendor-config!!
[0-4.1149] btsbc mod ld(0xbefd9000)
[0-4.1320] btpcm mod ld(0xbefe0000)
[0-4.1461] BTUSB btusb_state_proc_init: /proc/driver/btusb-state entry created
[0-4.1519] Bluetooth: [BTUSB]: Start Probe
[0-4.1559] btusb_create:initiating spin_locks for btusb-endpoint buffers
[0-4.1630] btusb_create:all endpoint-buffers lock init done
[0-4.1709] Bluetooth: [BTUSB]: Finished Probe
[0-4.1740] btusb mod ld(0xbefe8000)
[2-4.1858] hid_samsung mod ld(0xbe4bf000)
[FB:INIT] load_drivers_insmod thread end(7)
[FB:INIT] fl_callback_driver
[FB:INIT] fi_util_mq_send_cmd: cmd(107)
[FB:INIT] destroy mutex
[FB:INIT] fi_util_destroy_mutex: error while destory mutex[0](16)
[FB:INIT] fast init end
[1-4.3081] BTUSB btusb_state_file_open: Opening the /proc/driver/btusb-state
[1-4.3135] BTUSB btusb_state_file_read: read called: 1577 0x0
[1-4.3316] BTUSB btusb_state_file_open: Opening the /proc/driver/btusb-state
[1-4.3370] BTUSB btusb_state_file_read: read called: 1583 0x0
[0-4.3810] ##### send signal SIG : 9, dbus-daemon(478)->dbus-daemon(801) __send_signal
[2-7.1522] ##### send signal SIG : 9, dbus-daemon(478)->dbus-daemon(879) __send_signal
arc = 5, optind = 3 ,Kb 0, rotate 4
appcore: --- _call_predef_action: start
appcore: --- _call_predef_action: send msg
appcore: --- sysnoti_send: start
appcore: --- sysnoti_send: read
appcore: --- sysnoti_send: end
appcore: --- _call_predef_action: end
[tv-viewer] CChannelBanner::t_Hide end
[X_PRINT][X_INFORMATION][XOpenDisplay][Line :604] XInitThreads not called by Process Name:/usr/libexec/at-spil
[1-12.1182] ##### send signal SIG : 9, dbus-daemon(625)->dbus-daemon(1053) __send_signal
[X_PRINT][X_INFORMATION][XOpenDisplay][Line :60[3-12.1694] ##### send signal SIG : 9, dbus-daemon(1061)->dbusl
4] XInitThreads not called by Process Name:/usr/libexec/at-spi2/at-spi2-registryd ProcessId:1064 before firstl
[2-13.4081] down_read_trylock() failed. can't compare maps info
[3-23.5224] proc_entry mod ld(0xbe418000)
[PWR][26.668831] p[3-26.6727] [ft_dpms_off][pid:548,system_server]
ower_suspend : -1, instant_on : 0, type(1), pid(695:/usr/bin/tvctx-manager)
[PWR][26.668897] systemd(-1), aul(-1), wrt(-1), gplayer(-1), request_cold_poweroff(-1)
[PWR][26.668932] Cold Power off case (tick: 26, resume: 0)
[2-26.7888] 3G Dongle Port set to 0
[0-26.8011] USB Enabled GPIO set to 0
[0-26.8612] BTUSB btusb_lite_stop_all: Caller is 0xbeff1928
[0-26.8654] BTUSB btusb_lite_av_stop: BTPCM was not started
[0-26.8707] BTUSB btusb_lite_avdt_remove_scb: No SCB for handle 0
[0-26.8765] BTUSB btusb_lite_av_stop: BTPCM was not started
[0-26.8818] BTUSB btusb_lite_avdt_remove_scb: No SCB for handle 0
[1-26.8885] BTUSB btusb_release: enter
[1-26.8911] BTUSB btusb_lite_stop_all: Caller is 0xbefed758
[1-26.8967] BTUSB btusb_lite_av_stop: BTPCM was not started
[1-26.9020] BTUSB btusb_lite_avdt_remove_scb: No SCB for handle 0
[1-26.9078] BTUSB btusb_lite_av_stop: BTPCM was not started
[1-26.9132] BTUSB btusb_lite_avdt_remove_scb: No SCB for handle 0
[PWR][26.950323] Call PostPoweroff callbacks
WOW_API_LOG wow_driver_set_start, 697, wow set info (exit): vendor (3), power off mode (0), ip 192 168 0 64(1
[0-27.2017] Power down.
[0-27.2024] ================================================================================
[0-27.2106] SMP Send Stop Other CPU!
[0-27.2140] ================================================================================
[0-27.2222]
[0-27.2222]
[0-27.2222] >>> micom power off!! (requested:system_server) <<<
[0-27.2222] and if there is, how would i go about finding it?