SamyGO

I don't remember that I inspected LNxxB630 firmware before.

Your Modal is larger than that, I saw 3 digits are missing.
My model is LE40B650T2W for example.
You can try that tricks at WiKi pages.
I think your firmware could supported too.
You have a LAN jack? If you have, you can use Telnet Enabler application for enable internet.
Also you can check your firmware for enabling Telnet on Firmware.

If you don't have LAN jack on your TV, than you could use ExLink cable to enter your TV's linux console.

This writing is could be good on wiki too.
Thanks

I move this topic to Support area too.

http://wiki.samygo.tv/index.php?title=I ... pported%3F

I prepare your answer at wiki. Happy reading.
And your HW not supported but will supported

Apply things on wiki pages and make our life easy.

No,
LNB630 uses 128 MB flash while LNB650 uses 1GB.
So, your firmware types are same but there could be incompatibilities.
Your version is 1012.0 but B650's version is 1012.3.
I don't know if it updates your firmware or if its work on your TV or not.
There is hight probability that could brick your TV too.
I will look into your FW and will add support for that.
But at least, standard SamyGO FW Patcher will enable telnet at your version but the Video AR Fix.

There is also error on table which is fixed now. Script is compatible with T-CHEAUSC, not T-CHE6AUSC.
Thanks.