Hi,
I delevopped a new Channel Editor supporting Serie-C and Serie-D.
It provides following features:
? SCM archive file support for all TV Set generation (B-Series to D-Series)
? Stand-alone channel map file support
? Multi-Tab edition
? Channel map sorting based on a reference channel list
? Easy channel filtering
? Display various database (Transponder, Satellite, Service Provider)
? Edit capability (Cut, Copy, Paste, Delete, Swap Channel, Add Channel, Channel number increment and decrement) with multi row selection support
I mainly checked with UE46C7000 TV and map-SateD files. I will need some SCM files from Serie-C/Serie-D to better decode fields of map-AirD/map-CableD files. So if you can help me, send me your SCM through PM.
As this is Beta release, please don't forget to backup your SCM before modifying it.
This is Beta release for win7 and win-XP. Linux version will follow.
http://www.megaupload.com/?d=N3V267NL
Please let me know your feedbacks or any bugs/problem you may encounter.
Enjoy
ovtx62
Note: please be tolerant as this my first open source SW.
SamToolBox Channel Editor
Re: SamToolBox Channel Editor
Hi,
here is the linux version (tested with Ubuntu 11.04)
http://www.megaupload.com/?d=5KMCQ53C
It requires to have Qt 4.7 run-time libraries installed. You can get them from http://qt.nokia.com/download or from you apps installer (eg. synaptic).
your feedbacks are welcome
enjoy !
ovtx62
here is the linux version (tested with Ubuntu 11.04)
http://www.megaupload.com/?d=5KMCQ53C
It requires to have Qt 4.7 run-time libraries installed. You can get them from http://qt.nokia.com/download or from you apps installer (eg. synaptic).
your feedbacks are welcome
enjoy !
ovtx62
Re: SamToolBox Channel Editor
Hi,
New release available to correct following problems:
1. Corrected map-CableD/map-AirD file corruption during edit/save
2. Corrected problem when exiting tool using top, right exit button
I have created a sourceforge project : http://samtoolbox.sourceforge.net
You can download version 0.2 for Win7,WinXP and Linux in following place :
https://sourceforge.net/projects/samtoolbox/files/
Enjoy!
ovtx62
New release available to correct following problems:
1. Corrected map-CableD/map-AirD file corruption during edit/save
2. Corrected problem when exiting tool using top, right exit button
I have created a sourceforge project : http://samtoolbox.sourceforge.net
You can download version 0.2 for Win7,WinXP and Linux in following place :
https://sourceforge.net/projects/samtoolbox/files/
Enjoy!
ovtx62
Re: SamToolBox Channel Editor
Thanx for your work! God job
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: SamToolBox Channel Editor
ilkera,
Air or Cable map view should be displayed. May be some fields could not be displayed correctly but the map table should be created. One possible case to have an empty tab (no table shown) is due to empty map file.
Please send me through PM your SCM file.
I never tried to enter directly a channel. This is quite advanced topic as it requires you know the different parameters of your channel.
Best solution is to let the TV sat decoder do the scan. If the decoder is not able to find the channel, it is probably due to some reception issue.
HTH,
ovtx62
Air or Cable map view should be displayed. May be some fields could not be displayed correctly but the map table should be created. One possible case to have an empty tab (no table shown) is due to empty map file.
Please send me through PM your SCM file.
I never tried to enter directly a channel. This is quite advanced topic as it requires you know the different parameters of your channel.
Best solution is to let the TV sat decoder do the scan. If the decoder is not able to find the channel, it is probably due to some reception issue.
HTH,
ovtx62
Re: SamToolBox Channel Editor
B series mapAirD does not seem to parse correctly. Details are in the Wiki
http://wiki.samygo.tv/index.php?title=S ... ist_format
http://wiki.samygo.tv/index.php?title=S ... ist_format
Re: SamToolBox Channel Editor
Ilkera,
SamToolBox v0.2 is able to open the .scm that doesn't contain the map-AirD or map-CableD files.
I can only find map-SateD file and the tool is able to open (it contains 1994 channels)
Does anybody know why the SCM export doesn't include map-AirD/map-CableD ?
SamToolBox v0.2 is able to open the .scm that doesn't contain the map-AirD or map-CableD files.
I can only find map-SateD file and the tool is able to open (it contains 1994 channels)
Does anybody know why the SCM export doesn't include map-AirD/map-CableD ?