enabling PVR & co should be work with ruSamsungTVCommunicator for 3011.1 as well - very easy to use!
http://forum.samygo.tv/viewtopic.php?f= ... a6d1f6201b
but, do not (as described there) something with "Model" or so. This is what worked for me:
HowTo:
- Setup ruSamsungTVCommunicator (http://www.rainerullrich.de/samsung/) and test that the virtual remote control is communicating with the TV - it has two additional buttons than your standard hardware remote!
- Switch of TV
- Access the service menu as usual: Press buttons INFO, MENU, MUTE and POWER subsequently on the "real" remote control
- Start up ruSamsungTVCommunicator, connect it with the TV, press virtual buttons FACTORY, wait some seconds and then 3SPEED
- enable "PVR-Mode" in sub-options.
- Switch off TV.
PVR on C-Series TV with Firmware 3009.2!
-
- Posts: 25
- Joined: Mon May 02, 2011 8:19 pm
-
- Posts: 25
- Joined: Mon May 02, 2011 8:19 pm
Re: PVR on C-Series TV with Firmware 3009.2!
why do you change the model number? no problem with 650, you have to go to sub-options and to enable pvr, nothing more to do.
Re: PVR on C-Series TV with Firmware 3009.2!
Are there any news how I can activate animated menus on my C650?
Only the unlocked PVR is animated, because this is actually only available for better models.
Only the unlocked PVR is animated, because this is actually only available for better models.
-
- Posts: 25
- Joined: Mon May 02, 2011 8:19 pm
Re: PVR on C-Series TV with Firmware 3009.2!
In what way is an animated menu animated?