SamyGO

Hello !!

First of all , many thanks to the developers and contributers of SamyGO !

I got an UE40D8090 and have already SamyGo installed , with the Wiki tutorial !
And now there are a few questions about getting smb-shares to work with my Laptop Win 7 Ultimate 64bit !

First problem ,this file isn?t in the init.d folder : service_name.init.dis

I read the instructions to enable samba shares.
Here was the second problem ... there isn?t an path like this : /mtd_down/widget/user/SamyGO/SamyGO/etc/init.d/04_04_samba.init !!!!
I looked for the 04_04_samba.init file and found it here : /mtd_rwcommon/widgets/user/SamyGO/SamyGO/etc/init.d/04_04_samba.init !!!!

Is this the right path for the .init files which i can/must configure ???
So far so good , i got on and edited the file with notpad++ like this :

(I put user=xbox and pass=pass because i got an guest-account on my laptop called "xbox", so my samba-shares in my network work flawlessly !!! )

##### CHANGE MEEEEE !!!!! ######
USER="xbox"
PASSWD="pass"
PERM="rw" # can be ro or rw
##### CHANGE MEEEEE END ######

[ -e /mtd_rwarea/smb_userdata ] && source /mtd_rwarea/smb_userdata

[ -z $USER ] && exit 1
[ -z $PASSWD ] && exit 1

DEST_DIR=$MOUNT_PATH/smb
SERVER="192.168.1.4"
# SERVER="10.0.0.1" # if you want a fixed server
SHARES="Filme"
FR_NAME="Samba Server"



Is here everything O.K. ?

Then i went on doing that (like in Wiki) :

created a file like this:
smb_userdata
USER="xbox"
PASSWD="pass"

Put this file to USB and attached to TV.
Restart TV
Run SamyGO

MUST the USB with the smb_userdata-file be attached ALWAYS to the TV ???

So here my questions :

1. : Have i got to create this file service_name.init.dis and transfer it via FTP
2. : Have i got to create this path/file : /mtd_down/widget/user/SamyGO/SamyGO/etc/init.d/04_04_samba.init
3. : Is everything o.k. with my 04_04_samba.init .... or did i something wrong
4. : Must the USB-Pen with the smb_userdata file always be in the USB-Port of the TV ...

Questions about questions

Appreciate EVERY HELP

Thanks

boogie wrote:Hello !!
I read the instructions to enable samba shares.
Here was the second problem ... there isn?t an path like this : /mtd_down/widget/user/SamyGO/SamyGO/etc/init.d/04_04_samba.init !!!!
I looked for the 04_04_samba.init file and found it here : /mtd_rwcommon/widgets/user/SamyGO/SamyGO/etc/init.d/04_04_samba.init !!!!
Is this the right path for the .init files which i can/must configure ???

It`s ok, place is right. On your tv SamyGo is placed in /mtd_rwcommon/widgets/user/SamyGO/

So far so good , i got on and edited the file with notpad++ like this :
(I put user=xbox and pass=pass because i got an guest-account on my laptop called "xbox", so my samba-shares in my network work flawlessly !!! )

Code: Select all

##### CHANGE MEEEEE !!!!! ######
USER="[b]xbox[/b]"
PASSWD="[b]pass[/b]"
PERM="rw" # can be ro or rw
##### CHANGE MEEEEE END ######

[ -e /mtd_rwarea/smb_userdata ] && source /mtd_rwarea/smb_userdata

[ -z $USER ] && exit 1
[ -z $PASSWD ] && exit 1

DEST_DIR=$MOUNT_PATH/smb
SERVER="[b]192.168.1.4[/b]"
# SERVER="10.0.0.1" # if you want a fixed server
SHARES="[b]Filme[/b]"
FR_NAME="Samba Server"

Is here everything O.K. ?

Stop. Either edit script ##### CHANGE MEEEEE !!!!! ###### section, or don`t touch user and passw block there and create smb_userdata.
If you edit script, then additional smb_userdata file dont needed at all. Anyway, if created, it is needed only once - it will be copied to TV`s rwarea for further use.

1. : Have i got to create this file service_name.init.dis and transfer it via FTP
2. : Have i got to create this path/file : /mtd_down/widget/user/SamyGO/SamyGO/etc/init.d/04_04_samba.init
3. : Is everything o.k. with my 04_04_samba.init .... or did i something wrong
4. : Must the USB-Pen with the smb_userdata file always be in the USB-Port of the TV ...

1. no, there was just example!!! service_name.init means 04_04_samba.init...
2. I answered already, you don`t needed to create anything there (also - impossible, filesystem is readonly )
3 and 4 .. see above.

p.s. Pls use text formatting tags for code, quotes and so on...

Thanks juuso !!!

Now i have access to my smb network , i see the smb folder in SamyGO Virt. USB , and then i see the IP of my Laptop/Share (192.168.1.4) !!!

But when i enter them ....the folders are empty ?????

What can i do now ???

BTW: i?m totally new to linux !

Check this:
http://sourceforge.net/projects/samygo/ ... f/download

I checked this already , and that isn?t the problem !!!

Maybe i got to enable / disable some init.d files... ?!?!?!
Here the list of my init.d folder


Please take a look !
Thanks

In my experience if you browse to the share and you see nothing is something related file sharing or permission on your pc.
I was able to regulay browse within a share on winxp an was not on the other pc where share was done trough Vista.
I did not edited the 04_04 script anymore and created again the share in vista. Check permission on original folder too not only in share.
Now I browse both without problem.

bye J.

where i founf tutorial for dumbs?

I have samba share without password and need play avi from tv...

i write in 04_04_samba.init

SERVER="192.168.11.1"

and

SHARES="WDCWD20"

but not show anything in SamyGO Virt. USB!!!

from notebook normaly show share \\192.168.11.1 and from iDevice i browse too same share smb://192.168.11.1 vithout problem and play by BUZZ Player

Where is bug please?