Page 1 of 1
Re: PVR is not working | samygo virtual usb unknown
Posted: Thu Jan 12, 2012 5:04 pm
by juusso
First: Full TV model number
Second: Firmware name and version.
Better: take picture of first Service menu screen and attach it here.
Re: PVR is not working | samygo virtual usb unknown
Posted: Mon Feb 06, 2012 1:11 pm
by DEUS
Hi, just had similar issues,
1. it seems that the Devices in TVRecord are listed alphabetical and trys on the first one
2. the space on the SamyGo Virt USB not enougth to store the PVR Datafiles (it trys to create it ~1MB) this is the "Unknown" error
3. increasing the space for vusb to 1500 let the software create the files but then it gets stuck anyway
Just as an Question more or less regarding to this. what i want to do is mount the NFS share to an Virt USB and record to this.
i use the modified vusb.init for getting 2 virtual USBs on the first the NFS Share gets mounted on the second djmount and nfsmount.
everything works, if necesarry i can post the modifications. TVRecords still get stuck when accesing Virt USB 2 (i dont care at the moment)
but is it possibel to set up an timed record to the NFS?
Re: PVR is not working | samygo virtual usb unknown
Posted: Mon Feb 06, 2012 2:38 pm
by jarod73
Same happened here.. now I leave a pendrive in usb1 and I mount the share to record on directly on this device that is marked for recording by original firmware.
Vusb worked many times but suddently stopped. Curiously the default recording device changes +1 for n vusb I created and mounted, eg. 2 vusb default recording vusb2, 3 vusb ..default vusb3 even if I change it at next reboot it starts again wrong.
J.