SamyGO

Java Graphics Engine is initialized. <c=1>
JAVA [task#00,0x07a90158] WARN [CVM] jvm.c:1990 - Add Thread (USER)> JAVA Thread
(ee: 0x07a90158, task#00) Total: 13 (User: 10)
JAVA [task#00,0x07a90158] WARN [CVM] jvm.c:2045 - Start Thread[AWT-Flush,4] (ee:
0x07a90158, task#00)
JAVA [task#00,0x06b8bef8] ### PBP 1.1.2 Graphics Engine Is Launched ###
JAVA [task#00,0x06b8bef8] WARN [CVM] jni_impl.c:5456 - Detached Thread 0: (ee 0x
06b8bef8, task#00)
JAVA [task#00,0x07a5c090] WARN [CVM] jni_impl.c:5389 - Attached Thread 14: (ee 0
x07a5c090, task#00)
[NET_SS/Fatal] 213 : [LoadWirelessStaModule][line:2990] insmod wl.ko ... - Done
!!
[NET_SS/Fatal] 214 : [CreateWIFIDevice][line:37]
[NET_SS/Fatal] 215 : [IWIFIDeviceBroadcom][line:100] bcm0
[NET_SS/Fatal] 216 : [IWIFIDeviceBroadcom][line:111] Device Name : bcm0, Device
Name Length : 5
[NET_SS/Fatal] 217 : [IWIFIDeviceBroadcom][line:145] REGION INFO IS PROPER : Fac
tory WiFi Region Value is WIFI_REGION_E
[NET_SS/Fatal] 218 : [IWIFIDeviceBroadcom][line:146] TRYING TO SET COUNTRY REGIO
N : 4
[AP_DUALTV/Fatal] 219 : [bool CSsDualTV::t_BootEncoder()] [[[[[ InsertBootModule
duration: 510 ]]]]]

[AP_DUALTV/Fatal] 220 : [/home2/dkhi/GP_REL_1G/AP/AP_DualTV/DualTVSS/Src/Encoder
Interface.cpp LoadEncoderImage 377] starts

[NET_MW/Fatal] 221 : [GetNetworkInfo][line:340] file path = /mtd_rwarea/network_
Wireless_info not found. Initialize the info file....

[NET_MW/Fatal] 222 : [GetDNSMode][line:873] file path = /mtd_rwarea/network_Wire
less_info not found. Initialize the info file....

[NET_MW/Fatal] 223 : [GetInstance][line:125] Already created...
wirelessDevName(0) = bcm0
[AP_DUALTV/Fatal] 224 :




********************************************************************
*/mtd_exe/dualtv/encoder_nxc1000_rev.bin
********************************************************************





[AP_DUALTV/Fatal] 225 : [t_Main]filesize = 315392

pMACChanger create success!
[AP_DUALTV/Fatal] 226 : [t_Main] Encoder loading completed

[AP_DUALTV/Fatal] 227 : [CEncoderUSBBuilder::t_BlockUntilEncoderLoaded] after ti
mer lock !!! ..0









[AP_DUALTV/Fatal] 228 : retVal = 0 ETIMEDOUT = 110

[AP_DUALTV/Fatal] 229 : [bool CSsDualTV::t_BootEncoder()] [[[[[ LoadEncoderImage
duration: 320 ]]]]]


osl_wireless_initialization~!!
[BT_SS/Fatal] 230 : [ReadRomBdAddress][line:1831] [BluetoothDeviceBroadcom::Read
RomBdAddress]Flash BD address: E4-E0-C5-E2-63-F3

[BT_SS/Fatal] 231 : [Set3DSyncDetection][line:2475] Set3DSyncDetection : [Disabl
e]
[BT_SS/Fatal] 232 : [ReadRomBdAddress][line:1831] [BluetoothDeviceBroadcom::Read
RomBdAddress]Flash BD address: E4-E0-C5-E2-63-F3

[BT_SS/Fatal] 233 : [Set3DModeOffSetForBroadCast][line:2178] m_b3DOffsetBroadcas
t[0], m_frame_period[60001]... I would make 3DGS as open
[BT_MW/Fatal] 234 : [StartBluetooth][line:645] OK!!!
[AP_BT_APP/Fatal] 235 : [virtual bool CBluetoothAppBase::t_OnEvent(const PTEvent
*)][line:1198] [CBluetoothAppBase]EVENT_BT_SERVICE_STARTED
[BT_SS/Fatal] 236 : [SetShutterInfoForBroadCast][line:2452] shutter info exceeds
65535. m_frame_period[60001], m_DutyForShuttering[125]
[BT_SS/Fatal] 237 : [Set3DModeOffSetForBroadCast][line:2178] m_b3DOffsetBroadcas
t[0], m_frame_period[60001]... I would make 3DGS as open
[BT_SS/Fatal] 238 : [Set3DOffsetBroadcastOnOff][line:2460] Set3DOffsetBroadcastO
nOff : [Disable]
[BT_SS/Fatal] 239 : [SetShutterInfoForBroadCast][line:2452] shutter info exceeds
65535. m_frame_period[60001], m_DutyForShuttering[125]
[BT_SS/Fatal] 240 : [Set3DModeOffSetForBroadCast][line:2178] m_b3DOffsetBroadcas
t[0], m_frame_period[60001]... I would make 3DGS as open
[BT_SS/Fatal] 241 : [Set3DSyncDetection][line:2475] Set3DSyncDetection : [Disabl
e]
[AP_DUALTV/Fatal] 242 : [InsertControlModule] /dev/encoder Open Successful : 0x
71

[AP_DUALTV/Fatal] 243 : [bool CSsDualTV::t_BootEncoder()] [[[[[ InsertControlMod
ule duration: 2010 ]]]]]

[AP_DUALTV/Fatal] 244 : [CSsDualTV::t_BootEncoder]Handler number is = 113!!!

[AP_DUALTV/Fatal] 245 : [CSsDualTV::t_BootEncoder] End

[AP_DUALTV/Fatal] 246 : [/home2/dkhi/GP_REL_1G/AP/AP_DualTV/DualTVSS/Src/Encoder
Interface.cpp t_Main 861] starts

CHANGE STATE!!!
[AP_DUALTV/Fatal] 247 : [EncoderState][CallbackEncoderControl Line:545] Callback
EncoderControl!


[AP_DUALTV/Fatal] 248 : [CEncoderControl][t_CheckAck Line:502] ACK OK Packet!!!C
MD : 0x16
[AP_DUALTV/Fatal] 249 : [EncoderState][CallbackEncoderControl Line:545] Callback
EncoderControl!


[AP_DUALTV/Fatal] 250 : [CEncoderControl][t_CheckAck Line:502] ACK OK Packet!!!C
MD : 0x16
*************[ SWL VALUE IS OFF ]***************
[CIP_KERNEL] Success!! Authuld is successfully completed.
####### Header = 12, 0
[AP_DUALTV/Fatal] 251 : [void CInteractiveRemote::ProcessRemoteInputType(CMainTV
AgentService*, int)] ########## RemoteInputType(1) ##########
JAVA [task#-1,0x00000000] WARN [TOOLKIT] ShadowWindowFactory.cpp:139 - [ShadowWi
ndowFactory::t_OnEvent] screen resolution event is posted!
pixmap address 0x51deb600, w 1280, h 720
Fail to open file! - Read fileFail to read ddata
success file read - Length(80)
Power off time 1/1/0/6
Power on time 1/1/0/8
[AP_INFOLINK/Fatal] 252 : Call START BG Mode!!!
[AP_INFOLINK/Fatal] 253 : GetCurrentFC Return True
[AP_INFOLINK/Fatal] 254 : GetCurrentFC LineValue is = [0]
[AP_INFOLINK/Fatal] 255 : START BG Mode!!!
[SSL_library_init] already intialized...
[AP_INFOLINK/Fatal] 256 : CInfoLink2WrapperReal::dlopenWrapper()
[AP_INFOLINK/Fatal] 257 : filename is = [libSefBroker.so]
[AP_INFOLINK/Fatal] 258 : END CInfoLink2WrapperReal::dlopenWrapper()
[CSEFDebug::Create(16)] Creator called.
[CSEFDebug::SetLogLevel(31)] level = 0
[CSEFDebug::SetDebugModule(46)] Log module = 0, onOff = 0
[CSEFDebug::SetDebugModule(46)] Log module = 1, onOff = 0
[CSEFDebug::SetDebugModule(46)] Log module = 2, onOff = 0
[AP_INFOLINK/Fatal] 259 : Update is False
[AP_INFOLINK/Fatal] 260 : *****************************************************
[AP_INFOLINK/Fatal] 261 : **** Infomation for connecting with hub-site ****
[AP_INFOLINK/Fatal] 262 : *****************************************************
[AP_INFOLINK/Fatal] 263 : Server Type : Operating
[AP_INFOLINK/Fatal] 264 : TVID : KLCKF5GZC533C
[AP_INFOLINK/Fatal] 265 : Mac Address : d0667be19fee
[AP_INFOLINK/Fatal] 266 : Firmware : T-INFOLINK2011-1010
[AP_INFOLINK/Fatal] 267 : Country Code :
[AP_INFOLINK/Fatal] 268 : Model Code : Genoa_Yahoo
[AP_INFOLINK/Fatal] 269 : *****************************************************
[AP_INFOLINK/Fatal] 270 : Update is True
[AP_FULLBROWSER/Fatal] 271 : Fail to open /mtd_down/widgets/normal/20111000001/f
onts/EU/fonts.conf, Set default path.
[AP_FULLBROWSER/Fatal] 272 : Launcher path = /mtd_down/widgets/normal/2011100000
1/bin/WebkitBrowserLauncher
[AP_FULLBROWSER/Fatal] 273 : Url = UI_URL=file:///mtd_down/widgets/normal/201110
00001/WebkitUI/Index.html
[AP_FULLBROWSER/Fatal] 274 : BG MODE = disable
[AP_FULLBROWSER/Fatal] 275 : Mime = XDG_DATA_HOME=/mtd_rocommon/FullBrowser/.loc
al/share/
[AP_FULLBROWSER/Fatal] 276 : Plugins = MOZ_PLUGIN_PATH=/mtd_down/widgets/normal/
20111000001/plugins/
[AP_FULLBROWSER/Fatal] 277 : Font config = FONTCONFIG_FILE=/mtd_rocommon/FullBro
wser/fonts/fonts.conf
[AP_FULLBROWSER/Fatal] 278 : Country = EU
[AP_FULLBROWSER/Fatal] 279 : Max Tab : 3, Max Memory : 330, Max Flash : 15
[AP_INFOLINK/Fatal] 280 : Verify Path = [/mtd_down/widgets/manager/10110000001]
[WPS]: HW protection
verified = 0
[AP_INFOLINK/Fatal] 281 : Fail verify WM
[AP_INFOLINK/Fatal] 282 : CNNaviAppBase::SaveUnsafeMode()

>>[ERR:NapoliShare.cpp] t_Napoli_MonitoringTask():4803 NAPOLI MONITORING
TASK ERROR !!!!!!!!! (DDR Lock Value: 255, RX_PWRDN: 0)

[AP_INFOLINK/Fatal] 283 : function = [cp -rf /mtd_rocommon/infolink/manager/* /m
td_down/widgets/manager/10110000001/]
[AP_INFOLINK/Fatal] 284 : START Copy Internet@TV File from ROCOMMON!!!!!!
[AP_INFOLINK/Fatal] 285 : END Copy Internet@TV File from ROCOMMON!!!!!! = [0]
[AP_INFOLINK/Fatal] 286 : function = [cp -rf /mtd_rocommon/infolink/emps/* /mtd_
down/emps/]
[AP_INFOLINK/Fatal] 287 : START Copy EMP from ROCOMMON!!!!!!
[AP_INFOLINK/Fatal] 288 : END Copy EMP from ROCOMMON!!!!!! = [0]
[AP_INFOLINK/Fatal] 289 : Verify Path = [/mtd_down/widgets/manager/10110000001]
[WPS]: HW protection
verified = 0
[AP_INFOLINK/Fatal] 290 : Fail verify WM
[AP_INFOLINK/Fatal] 291 : Fail verify WM from ROCOMMON => Verify Success
[AP_INFOLINK/Fatal] 292 : CNNaviAppBase::SaveUnsafeMode()
[AP_INFOLINK/Fatal] 293 : Create Widget Manager ID => 10110000001
(DbgMaple) [AP_BROWSER/Fatal] 294 : [FATAL] /home2/dkhi/GP_REL_1G/AP/AP_Browser/
Maple2011/src/ae/aeWidgetEngine.cpp:901 in createSmartSideBarByWidgetInfo()
(DbgMaple) [AP_BROWSER/Fatal] 295 : Enter createSmartSideBar (id : 10110000001)
(DbgMaple) [AP_BROWSER/Fatal] 296 : [FATAL] /home2/dkhi/GP_REL_1G/AP/AP_Browser/
Maple2011/src/core/am/amWidget.cpp:50 in onTaskCreate()
(DbgMaple) [AP_BROWSER/Fatal] 297 : Enter CWidget::onTaskCreate (widget : 0x7b33
e78[10110000001], task : 0x7b33f20) (SCREEN NUMBER=1)
(DbgMaple) [AP_BROWSER/Fatal] 298 : [FATAL] /home2/dkhi/GP_REL_1G/AP/AP_Browser/
Maple2011/src/ae/aeWidgetEngine.cpp:1077 in createSmartSideBarByWidgetInfo()
(DbgMaple) [AP_BROWSER/Fatal] 299 : Exit createSmartSideBar (id : 10110000001)
[AP_INFOLINK/Fatal] 300 : CWidgetEngine::createSmartSideBar returns TRUE
[AP_INFOLINK/Fatal] 301 : Unsafe Mode --> Wait Mode
[AP_INFOLINK/Fatal] 302 : Call activateSmartSideBar
(DbgMaple) [AP_BROWSER/Fatal] 303 : [FATAL] /home2/dkhi/GP_REL_1G/AP/AP_Browser/
Maple2011/src/ae/aeWidgetEngine.cpp:1223 in activateSmartSideBar()
(DbgMaple) [AP_BROWSER/Fatal] 304 : Enter activateSmartSideBar (id : 10110000001
)
(DbgMaple) [AP_BROWSER/Fatal] 305 : [FATAL] /home2/dkhi/GP_REL_1G/AP/AP_Browser/
Maple2011/src/core/am/amManagerWidget.cpp:457 in onActivateManagerWidget()
(DbgMaple) [AP_BROWSER/Fatal] 306 : onActivateManagerWidget
(DbgMaple) [AP_BROWSER/Fatal] 307 : [FATAL] /home2/dkhi/GP_REL_1G/AP/AP_Browser/
Maple2011/src/core/pl/plProcess.c:767 in pl_InitStaticPLClass()
(DbgMaple) [AP_BROWSER/Fatal] 308 : [Maple Side Plugin] "Remote" plugin is not s
upported in this application.
(DbgMaple) [AP_BROWSER/Fatal] 309 : [FATAL] /home2/dkhi/GP_REL_1G/AP/AP_Browser/
Maple2011/src/ae/aeWidgetEngine.cpp:1253 in activateSmartSideBar()
(DbgMaple) [AP_BROWSER/Fatal] 310 : Exit activateSmartSideBar (id : 10110000001)

[AP_INFOLINK/Fatal] 311 : CWidgetEngine::activateSmartSideBar returns TRUE
[AP_INFOLINK/Fatal] 312 : Update is True
[AP_INFOLINK/Fatal] 313 : Start!!! Waiting Activate Ready Event for Changing Wai
t Mode => Safe Mode!!
[CSocketPorts::GetPort(181)] Port Number: 43158
[CSocketPorts::GetPort(181)] Port Number: 51709
[CSocketPorts::GetPort(181)] Port Number: 54606
[CSocketPorts::GetPort(181)] Port Number: 38517
[EmpMain::EmpMain(59)] <<< EmpMain start >>>
[EmpMain::EmpMain(74)] EmpMain nPort = [38517] nLogParam = [-1]
[CSEFDebug::SetDebugModule(46)] Log module = 2, onOff = 0
[CheckVersion(45)] CheckVersion(strVersion=[2.000]), (m_strVersion=[1.000])
[CSocketPorts::GetPort(181)] Port Number: 59873
[CSocketPorts::GetPort(181)] Port Number: 51963
[CSocketPorts::GetPort(181)] Port Number: 37994
[CSocketPorts::GetPort(181)] Port Number: 40863
[CSocketPorts::GetPort(181)] Port Number: 47931
[CSocketPorts::GetPort(181)] Port Number: 60741
[CSocketPorts::GetPort(181)] Port Number: 52896
Singletone emp is running. name:[AppCommon] Emp:[51709] , Client:[52896] , Opti
on:[SINGLETON] , Status:[2][CSocketPorts::GetPort(181)] Port Number: 50461
[CSocketPorts::GetPort(181)] Port Number: 33137
[CSocketPorts::GetPort(181)] Port Number: 47107
[CSocketPorts::GetPort(181)] Port Number: 50293
(DbgAlert) [AP_WIDGET/Fatal] 314 : alert() : [Widget Manager Ver.] 3.288

(DbgAlert) [AP_WIDGET/Fatal] 315 : alert() : [Browser Ver.] 6.0.00067(Windows; U
; en-US; rv:1.8.1.11; Gecko/20071129; Firefox/2.5.0)

Task GetSystemVersion : [0]
(DbgAlert) [AP_WIDGET/Fatal] 316 : alert() : [LEEUM Ver.] DTP-BP-0621-42

Task GetSystemVersion : [1]
(DbgAlert) [AP_WIDGET/Fatal] 317 : alert() : [COMP Ver.] DTP-AP-COMP-639-Genoa_D
EU-82

GetServerType in plNNavi_pscomm.cpp . line 287
[CSocketPorts::GetPort(181)] Port Number: 60720
[CSocketPorts::GetPort(181)] Port Number: 60843
(DbgMaple) [AP_BROWSER/Fatal] 318 : [FATAL] /home2/dkhi/GP_REL_1G/AP/AP_Browser/
Maple2011/src/core/am/amManagerWidget.cpp:457 in onActivateManagerWidget()
(DbgMaple) [AP_BROWSER/Fatal] 319 : onActivateManagerWidget
(DbgAlert) [AP_WIDGET/Fatal] 320 : alert() : ########## Activate ##########

[t9wrapper::InitIME(1144)]InitIME called
[t9wrapper::SetLanguage(1299)]pLanguage is [69]
[t9wrapper::ImportUDBData(954)]Error: no UDB file is on your device for import o
peration
[t9wrapper::SetLanguage(1299)]pLanguage is [73]
[t9wrapper::SetLanguage(1307)]no match language
[AP_INFOLINK/Fatal] 321 : Setting m_SafeAlarm->Reset(TIME_OUT_STOP, 0);
[AP_INFOLINK/Fatal] 322 : Wait Mode --> Safe Mode
[AP_INFOLINK/Fatal] 323 : ### MESSAGE_WEBSVC_ACTIVATE_READY_WM ###, m_bFirstStar
t [1]
[AP_INFOLINK/Fatal] 324 : m_CountryCode []
[CSocketPorts::GetPort(181)] Port Number: 44572
[CSocketPorts::GetPort(181)] Port Number: 45256
read old MAC from EEPROM : [0xD0][0x66][0x7B][0xE1][0x9F][0xEE]
@@@@@@@@@@@@@@
Start MAC : Auth Step!!!
GetBootPartition : 1
ACTIVATE PARTITION = 1
READ VERSION INFO = 0
READ VERSION INFO = 1
READ DATA = 1,SWU_T-GAP8DEUC_001021_I04_EK000DK000KK000RK000_110106
MAIN VERSION - SWU_T-GAP8DEUC_001021_I04_EK000DK000KK000RK000_110106
===VERSION STRING -1===
SWU
T-GAP8DEUC
001021
I04
EK000DK000KK000RK000
110106
========================
======================================
MODEL NAME(Version String) = T-GAP8DEUC
======================================
GetVersionAndDateData = 1021.110106
======================================
MODEL NAME(.Info) = T-GAP8DEUC
======================================
Hex2String : in Mac : [0xD0][0x66][0x7B][0xE1][0x9F][0xEE]
Hex2Char [0xD]:[D]
Hex2Char [0x0]:[0]
Hex2Char [0x6]:[6]
Hex2Char [0x6]:[6]
Hex2Char [0x7]:[7]
Hex2Char [0xB]:
Hex2Char [0xE]:[E]
Hex2Char [0x1]:[1]
Hex2Char [0x9]:[9]
Hex2Char [0xF]:[F]
Hex2Char [0xE]:[E]
Hex2Char [0xE]:[E]
MAC Read String : D0667BE19FEE
Old Mac String = ## D0667BE19FEE ##
Network manager ip valid false
Network status is not stable
Auth Info Send request Error. (end) What are they written? I would just enable serial inputthanks,and you can not write anything with Hyper Terminal.help with