It does not work.Now the RED LED is blinking 10 times...stops 3 seconds and start blibking again, the panel is off and I can't use the service menu.
http://www.avforums.com/forums/lcd-led- ... 2-a-7.html
It does not work.Now the RED LED is blinking 10 times...stops 3 seconds and start blibking again, the panel is off and I can't use the service menu.
jeroenb wrote: Had the same problem, i changed my model number in the service menu, then it started rebooting over and over again.
I looked here for a solution, but after reading all the messages (took me over one day) i could not find a solution for it. and thought i bricked my tv.
Allot of people with the same problem (not reading carefully)
I found a rather complex and risk-full solution, but being stupid as i am i tried it and it worked!!
be very careful!
Here is what i did;Its working again!
- - Disconnect the power cable
- - (if you use a CI+ PMCIA card)remove the CI+ module
- - Remove all the screws form the back-end (12, I guess)
- - Remove the cable on the mainbord (see image down below)
- - Plugin the powercable (TV is now on standby)
- - Insert the code for getting into the service menu (info+menu+mute+standby)
- - the tv starts and the service menu shows up.
- - Now carefully connect the the lcd cable back to the main board. (be very careful)
- - Voila, here is the service menu back on screen
- - Now, recover the model number (eg LB550)
- - now save, by pressing the power-button (your tv shuts down)
- - As in a test turn on the tv and see if its working again.
- - Turn of the tv and remove the powercable
- - Place the backend together with screws
See the mainbord cable disconnected down below.SpoilerShow
First I got rid of the blinking.tancioste wrote: Now the RED LED is blinking 10 times...stops 3 seconds and start blibking again, the panel is off and I can't use the service menu.
is there any photo or video to see myself what to do?- Short-circuit the legs of the chip(as the WiKi).