Page 1 of 2
Device Manager 55D8000
Posted: Sat Mar 24, 2012 2:29 am
by derewasazx
Code: Select all
[ Device Manager - TOP Debug Menu]
------------------------------------
01 : Start DeviceManager
02 : Stop DeviceManager
03 : Suspend Mode Test - Sleep
04 : Suspend Mode Test - WakeUp
05 : Start Monitoring
06 : Stop Monitoring
07 : Start Stress Test
08 : Stop Stress Test
------------------------------------
11 : USB Test
12 : DLNA, FLASH, ODD, HDD, MoIP Test
====================================
21 : Print ALL Device Info
22 : Print Device Info with KEY
23 : Print ALL Partition Info
====================================
80 : Print Deadlock Status
88 : Shell
====================================
FF : Exit
====================================
DBG> : 0x88
VDLinux#>
Hello, could you tell me the code for :VDLinux#>
Re: Device Manager 55D8000
Posted: Sat Mar 24, 2012 5:45 am
by juusso
OK. And the trick is.... ?
If you found the way how to unlock filtering, then were waiting for solution, another people should confirm it too.
Have you added this text in log while posting this message or console is unfiltered by default?.
Re: Device Manager 55D8000
Posted: Sat Mar 24, 2012 11:57 am
by derewasazx
I'm sorry I did not understand, no code to unlock (VDLinux #>)? thanks
Re: Device Manager 55D8000
Posted: Sat Mar 24, 2012 12:20 pm
by juusso
here is no code. This shell is with filtered symbol input, implemented at kernel level.
Re: Device Manager 55D8000
Posted: Sat Mar 24, 2012 12:43 pm
by derewasazx
then you must find a way to disable the filter to write VDLinux #>?
Re: Device Manager 55D8000
Posted: Sat Mar 24, 2012 12:48 pm
by juusso
Must? 
i`m not, do you ? 
Re: Device Manager 55D8000
Posted: Sat Mar 24, 2012 1:29 pm
by derewasazx
and so that
Re: Device Manager 55D8000
Posted: Sat Mar 24, 2012 2:20 pm
by prairie
So where did you activate "Device Manager" part of TDM? I have not seen this in D8000 TDM.
Re: Device Manager 55D8000
Posted: Sun Mar 25, 2012 8:27 am
by juusso
Code: Select all
23331003
20089999
====================================
[ TOP Debug Menu]
------------------------------------
1 : SubSystem Print On/Off
2 : Platform Print Setting
3 : TD Print Setting
4 : Performance Print Setting
5 : Sdal Print Setting
6 : Sdal Trace Setting
10 : Factory Debug
11 : TD Debug
12 : SubSystem DBG
13 : SubSystem Info Print
21 : Louvre Print Setting
------------------------------------
70 : Jade Debug
80 : PVR Debug
====================================
99 : Exit
====================================
DBG> : 2
Input Start Level << : 0
Input End Level << : 0
====================================
[Platform Debug List]
------------------------------------
1. Basic Platform
2. Advanced Platform
3. Java
4. Pharos
5. Met Platform
6. Shadow
------------------------------------
99 : Exit
====================================
cmd> 2
====================================
[Platform Debug List]
------------------------------------
1 : FrontRunner Debug
2 : DeviceManager Debug
3 : ContentsManager Debug
4 : Uniplayer Debug
5 : InfoLink Debug
6 : NetworkManager Debug
7 : NetworkSetup Debug
8 : BluetoothApp Debug
9 : Map Debug
10 : CMPDivxApp Debug
11 : MediaPlay Debug
12 : MovieDemoApp Debug
13 : CEC Debug
14 : PSA Debug
15 : USBApp Debug
16 : FlashApps Debug
17 : SWU Debug
18 : DMR Debug
19 : HNC Debug
20 : Browser Debug
21 : SEF Debug
22 : HasApi Debug
23 : DAE Plugin Debug
24 : DeviceAPI Debug
------------------------------------
99 : Exit
====================================
cmd> 2
====================================
[DeviceManager Debug Module]
------------------------------------
1 : [OFF] DevMgr 2 : [OFF] DevMgr_FLASH 3 : [OFF] DevMgr_HDD
4 : [OFF] DevMgr_MSC 5 : [OFF] DevMgr_PTP 6 : [OFF] DevMgr_SS
====================================
Debug Level = Fatal
====================================
80 : All OFF
81 : All ON
85 : Set Debug Level
====================================
90 : DeviceManager MW Debug
91 : DeviceManager SS Debug
92 : DEV Print Setting
99 : Exit
====================================
cmd> 0x90
====================================
[ Device Manager - TOP Debug Menu]
------------------------------------
01 : Start DeviceManager
02 : Stop DeviceManager
03 : Suspend Mode Test - Sleep
04 : Suspend Mode Test - WakeUp
05 : Start Monitoring
06 : Stop Monitoring
07 : Start Stress Test
08 : Stop Stress Test
------------------------------------
11 : USB Test
12 : DLNA, FLASH, ODD, HDD, MoIP Test
====================================
21 : Print ALL Device Info
22 : Print Device Info with KEY
23 : Print ALL Partition Info
====================================
80 : Print Deadlock Status
88 : Shell
====================================
FF : Exit
====================================
DBG> : 0x88
Re: Device Manager 55D8000
Posted: Sun Mar 25, 2012 4:24 pm
by derewasazx
---------------------- Shell TEST ----------------------
----------------------------------------------------------
1 : [mount] mount status display
2 : [df] df status display
3 : [Log File] Log File Display
4 : [cat /proc/bus/usb/devices]
----------------------------------------------------------
5 : [hotplug ON] turn on the hotplug
6 : [hotplug OFF] turn off the hotplug
----------------------------------------------------------
7 : [Forced umount 1] umount /dtv/usb/sda1
8 : [Forced umount 2] umount /dtv/usb/sdb1
9 : [Forced umount 3] umount /dtv/usb/sdc1
10 : [Forced umount 4] umount /dtv/usb/sdd1
----------------------------------------------------------
88 : [Find Open File or Directory]
----------------------------------------------------------
11 : [dir1] ls -al /dtv/usb/sda1
12 : [dir2] ls -al /dtv/usb/sdb1
13 : [dir3] ls -al /dtv/usb/sdc1
14 : [dir4] ls -al /dtv/usb/sdd1
15 : [top] process utilization display
16 : [pwd] current directory display
17 : [ps]
18 : [Lock Status of log file] ls -al /dtv/usb
19 : [/sys/block] ls -al /sys/block
20 : [dmesg]
----------------------------------------------------------
30 : Enter system command
----------------------------------------------------------
51 : Parse /proc/bus/usb/devices
52 : Usb stress test : USB bus reset
----------------------------------------------------------
71 : USB Info Parser Test: Display All Nodes
72 : USB Info Parser Test: Display Root Nodes
73 : USB Info Parser Test: Display Port1 Nodes
74 : USB Info Parser Test: Display Port2 Nodes
75 : Dir Tree Test: Display Sub Folder
76 : Dir Tree Test: Display Folder Only
----------------------------------------------------------
90 : Debug Print
----------------------------------------------------------
ff: EXIT
----------------------------------------------------------
User Input : 0x30
Type shell command >> hello, this menu requires a code? thanks