SamyGO

Hello,

I attach the files of the flas of my TV LE40B650 after flashing the screen remains black and can not seem to turn what could this happen? What can I do to fix it?
I enclose the log:

thanks

debug.log
+set +e
+date +%H:%M:%S
+echo [00:02:58] cleaning /mtd_swu/
[00:02:58] cleaning /mtd_swu/
+rm -rf /mtd_swu/$RFS_LOG.LO$ /mtd_swu/RFS_POOL.SY$
rm: unable to remove `/mtd_swu/$RFS_LOG.LO$': Operation not permitted
rm: unable to remove `/mtd_swu/RFS_POOL.SY$': Operation not permitted
+date +%H:%M:%S
+echo [00:02:58] /mtd_swu/ cleaned.
[00:02:58] /mtd_swu/ cleaned.
+set -e
+echo ==========FFB ver. 0.5.9 by juuso==========
+echo
+echo ==========Some important system information==========
+echo
+cat /.info
+echo
+echo ========================mount=======================
+echo
+mount
+echo
+echo ========================df -h=======================
+echo
+df -h
+echo
+echo ===================PartitionSwitch*=================
+echo
+ls -l /mtd_rwarea/PartitionSwitch_0_0
+echo
+echo ======================Version*======================
+echo
+ls -l /mtd_rwarea/Version.0
+echo
+cat /mtd_rwarea/Version.0
+echo
+echo =========================end========================
+echo ==============FFB ver. 0.5.9 by juuso==============
+echo
+echo =====================Script start====================
+echo
+echo USB found: /dtv/usb/sda1
USB found: /dtv/usb/sda1
+date +%H:%M:%S
+echo [00:03:00] USB found: /dtv/usb/sda1
+[ -d /dtv/usb/sda1/T-CHL7DEUC ]
+firmware_usb=T-CHL7DEUC
+image_dir=T-CHL7DEUC/image
+date +%H:%M:%S
+echo [00:03:00] Directory found: /dtv/usb/sda1/
+[ -e /mtd_rwarea/PartitionSwitch_0_0 ]
+Version=/mtd_rwarea/Version.0
+date +%H:%M:%S
+echo [00:03:00] set Version to /mtd_rwarea/Version.0.
+PartFlag0=PartitionSwitch_0_0
+[ -e /mtd_rwarea/PartitionSwitch_1_0 ]
+date +%H:%M:%S
+echo [00:03:00] Found only PartitionSwitch_0_0.
+grep -c T-CHL7DEUC /dtv/usb/sda1/T-CHL7DEUC/image/info.txt
+[ 1 -gt 0 ]
+firmware_dir=T-CHL7DEUC
+date +%H:%M:%S
+echo [00:03:03] Found: T-CHL7DEUC firmware on USB.
+grep -c T-CHL7DEUC /dtv/usb/sda1/T-CHL7DEUC/image/info.txt
+grep -c T-CHL7DEUC /mtd_rwarea/Version.0
+[ 1 == 1 ]
+firmware_dir=T-CHL7DEUC
+touch /mtd_swu/2_fw_ok
+date +%H:%M:%S
+echo [00:03:03] Firmware on USB mach to firmware on TV. Going to upgrade...
+[ -e /dtv/usb/sda1/T-CHL7DEUC/image/[T-CHL7DEUC]-u-boot.bin ]
+echo START updating u-boot.bin
START updating u-boot.bin
+date +%H:%M:%S
+echo [00:03:04] START updating u-boot.bin
+bml.restore /dev/bml0/2 /dtv/usb/sda1/T-CHL7DEUC/image/[T-CHL7DEUC]-u-boot.bin
+sync
+date +%H:%M:%S
+echo [00:03:04] END updating u-boot.bin
+touch /mtd_swu/u_boot_ok
+echo END updating u-boot.bin
END updating u-boot.bin
+[ -e /dtv/usb/sda1/T-CHL7DEUC/image/[T-CHL7DEUC]-fnw.bin ]
+echo START updating fnw.bin
START updating fnw.bin
+date +%H:%M:%S
+echo [00:03:04] START updating fnw.bin
+bml.restore /dev/bml0/4 /dtv/usb/sda1/T-CHL7DEUC/image/[T-CHL7DEUC]-fnw.bin
+sync
+date +%H:%M:%S
+echo [00:03:05] END updating fnw.bin
+touch /mtd_swu/fnw_ok
+echo END updating fnw.bin
END updating fnw.bin
+[ -e /dtv/usb/sda1/T-CHL7DEUC/image/[T-CHL7DEUC]-Image ]
+echo START updating Image
START updating Image
+date +%H:%M:%S
+echo [00:03:05] START updating Image
+bml.restore /dev/bml0/5 /dtv/usb/sda1/T-CHL7DEUC/image/[T-CHL7DEUC]-Image
+sync
+date +%H:%M:%S
+echo [00:03:07] END updating Image
+touch /mtd_swu/Image_ok
+echo END updating Image
END updating Image
+[ -f /mtd_rwarea/ddcmp ]
+date +%H:%M:%S
+echo [00:03:07] ddcmp not found, searching on /dtv/usb/sda1
+[ -f /dtv/usb/sda1/T-CHL7DEUC/ddcmp ]
+date +%H:%M:%S
+echo [00:03:07] ddcmp found on /dtv/usb/sda1/T-CHL7DEUC/, trying to copy...
+cp -f /dtv/usb/sda1/T-CHL7DEUC/ddcmp /mtd_rwarea/
+date +%H:%M:%S
+echo [00:03:07] ddcmp copied to /mtd_rwarea/ successfully
+set +e
+date +%H:%M:%S
+echo [00:03:08] cleaning /mtd_swu/
+rm -rf /mtd_swu/$RFS_LOG.LO$ /mtd_swu/RFS_POOL.SY$
+date +%H:%M:%S
+echo [00:03:08] /mtd_swu/ cleaned.
+set -e
+[ -e /mtd_rwarea/PartitionSwitch_0_0 ]
+[ -e /dtv/usb/sda1/T-CHL7DEUC/image/exe.img.enc ]
+date +%H:%M:%S
+echo [00:03:08] exe.img.enc found on /dtv/usb/sda1, start copying...
+touch /mtd_swu/exe_img_start
+cp -f /dtv/usb/sda1/T-CHL7DEUC/image/exe.img.enc /mtd_swu/
+date +%H:%M:%S
+echo [00:03:21] exe.img.enc copied to /mtd_swu/ successfully!
+echo Start decoding and writing to /dev/bml0/10
+/mtd_rwarea/ddcmp -F -e T-CHL7DEUC -i /mtd_swu/exe.img.enc -o /dev/bml0/10
+touch /mtd_swu/exe_img_ok
+date +%H:%M:%S
+echo [00:03:53] /dev/bml0/10 restored. Deleting source...
+rm -rf /mtd_swu/exe.img.enc
+date +%H:%M:%S
+echo [00:03:53] exe.img.enc deleted from /mtd_swu/
+sync
+[ -e /dtv/usb/sda1/T-CHL7DEUC/image/appdata.img.enc ]
+date +%H:%M:%S
+echo [00:03:53] appdata.img.enc found on /dtv/usb/sda1, start copying...
+touch /mtd_swu/appdata_img_start
+cp -f /dtv/usb/sda1/T-CHL7DEUC/image/appdata.img.enc /mtd_swu/
+date +%H:%M:%S
+echo [00:03:56] appdata.img.enc copied to /mtd_swu/ successfully!
+echo Start decoding and writing to /dev/bml0/11
+/mtd_rwarea/ddcmp -F -e T-CHL7DEUC -i /mtd_swu/appdata.img.enc -o /dev/bml0/11
+touch /mtd_swu/appdata_img_ok
+date +%H:%M:%S
+echo [00:04:20] /dev/bml0/11 restored. Deleting source...
+rm -rf /mtd_swu/appdata.img.enc
+date +%H:%M:%S
+echo [00:04:21] appdata.img.enc deleted from /mtd_swu/
+touch /mtd_rwarea/PartitionSwitch_1_0
+date +%H:%M:%S
+echo [00:04:21] PartitionSwitch_1_0 created.
+date +%H:%M:%S
+echo [00:04:21] Writing firmware ID to Version.1...
+cat /dtv/usb/sda1/T-CHL7DEUC/image/version_info.txt
+[ -e /mtd_rwarea/Version_1_SIG ]
+date +%H:%M:%S
+echo [00:04:21] Version.1 created
+rm -rf /mtd_rwarea/PartitionSwitch_0_0
+date +%H:%M:%S
+echo [00:04:21] PartitionSwitch_0_0 removed.
+rm -rf /mtd_rwarea/ddcmp
+date +%H:%M:%S
+echo [00:04:21] /mtd_rwarea/ddcmp removed.
+sync
+echo
+touch /mtd_swu/5_end_ok
+echo USB update end !!!
+echo USB update end !!!
USB update end !!!
+sleep 10
+set +e
+date +%H:%M:%S
+echo [00:04:31] cleaning /mtd_swu/
+rm -rf /mtd_swu/$RFS_LOG.LO$ /mtd_swu/RFS_POOL.SY$
+date +%H:%M:%S
+echo [00:04:32] /mtd_swu/ cleaned.
+set -e
+echo
+date +%s
+end=272
+expr 272 - 178
+diff=94
+echo ========================
+echo |Duration = 94 seconds|
+echo ========================
+echo
+echo Welcome to pre-FEB world !!!
+echo ========================FFB end !!!========================
========================FFB end !!!========================
+echo ========================FFB end !!!========================
========================FFB end !!!========================
+echo ========================FFB end !!!========================
========================FFB end !!!========================
+echo ========================FFB end !!!========================
========================FFB end !!!========================
+echo ========================FFB end !!!========================
========================FFB end !!!========================
+echo ========================FFB end !!!========================
========================FFB end !!!========================
+echo
+echo TV is rebooting right now. Bye
+/mtd_boot/MicomCtrl 143
+/mtd_boot/MicomCtrl 143
+/mtd_boot/MicomCtrl 143

ffblog:

==============FFB ver. 0.5.9 by juuso==============

=====================Script start====================

[00:03:00] USB found: /dtv/usb/sda1
[00:03:00] Directory found: /dtv/usb/sda1/
[00:03:00] set Version to /mtd_rwarea/Version.0.
[00:03:00] Found only PartitionSwitch_0_0.
[00:03:03] Found: T-CHL7DEUC firmware on USB.
[00:03:03] Firmware on USB mach to firmware on TV. Going to upgrade...
[00:03:04] START updating u-boot.bin
[00:03:04] END updating u-boot.bin
[00:03:04] START updating fnw.bin
[00:03:05] END updating fnw.bin
[00:03:05] START updating Image
[00:03:07] END updating Image
[00:03:07] ddcmp not found, searching on /dtv/usb/sda1
[00:03:07] ddcmp found on /dtv/usb/sda1/T-CHL7DEUC/, trying to copy...
[00:03:07] ddcmp copied to /mtd_rwarea/ successfully
[00:03:08] cleaning /mtd_swu/
rm: unable to remove `/mtd_swu/$RFS_LOG.LO$': Operation not permitted
rm: unable to remove `/mtd_swu/RFS_POOL.SY$': Operation not permitted
[00:03:08] /mtd_swu/ cleaned.
[00:03:08] exe.img.enc found on /dtv/usb/sda1, start copying...
[00:03:21] exe.img.enc copied to /mtd_swu/ successfully!
Start decoding and writing to /dev/bml0/10
Ok....
[00:03:53] /dev/bml0/10 restored. Deleting source...
[00:03:53] exe.img.enc deleted from /mtd_swu/
[00:03:53] appdata.img.enc found on /dtv/usb/sda1, start copying...
[00:03:56] appdata.img.enc copied to /mtd_swu/ successfully!
Start decoding and writing to /dev/bml0/11
Ok....
[00:04:20] /dev/bml0/11 restored. Deleting source...
[00:04:21] appdata.img.enc deleted from /mtd_swu/
[00:04:21] PartitionSwitch_1_0 created.
[00:04:21] Writing firmware ID to Version.1...
SWU_T-CHL7DEUC_002005_I02_ES000DS000_090930
[00:04:21] Version.1 created
[00:04:21] PartitionSwitch_0_0 removed.
[00:04:21] /mtd_rwarea/ddcmp removed.

USB update end !!!
[00:04:31] cleaning /mtd_swu/
rm: unable to remove `/mtd_swu/$RFS_LOG.LO$': Operation not permitted
rm: unable to remove `/mtd_swu/RFS_POOL.SY$': Operation not permitted
[00:04:32] /mtd_swu/ cleaned.

========================
|Duration = 94 seconds|
========================

Welcome to pre-FEB world !!!

TV is rebooting right now. Bye

sysinfo.log

==========FFB ver. 0.5.9 by juuso==========

==========Some important system information==========


========================mount=======================

/dev/root on / type squashfs (ro)
none on /proc type proc (rw)
none on /sys type sysfs (rw)
none on /dev/sam type tmpfs (rw)
none on /dtv type tmpfs (rw)
/dev/tbml7 on /mtd_boot type squashfs (ro)
none on /mtd_ram type tmpfs (rw)
/dev/stl0/14 on /mtd_rwarea type rfs (rw)
/dev/tbml8 on /mtd_exe type rfs (ro)
/dev/tbml9 on /mtd_appdata type squashfs (ro)
/dev/stl0/13 on /mtd_tlib type rfs (rw)
/dev/stl0/15 on /mtd_contents type rfs (rw)
/dev/stl0/16 on /mtd_down type rfs (rw)
/dev/stl0/12 on /mtd_wiselink type rfs (rw)
/dev/stl0/17 on /mtd_swu type rfs (rw)
none on /proc/bus/usb type usbfs (rw)
/dev/sda1 on /dtv/usb/sda1 type vfat (rw,sync,fmask=0022,dmask=0022,codepage=cp437,iocharset=utf8,shortname=mixed)

========================df -h=======================

Filesystem Size Used Available Use% Mounted on
/dev/tbml6 3.1M 3.1M 0 100% /
none 10.0M 12.0k 10.0M 0% /dtv
/dev/tbml7 896.0k 896.0k 0 100% /mtd_boot
none 10.0M 0 10.0M 0% /mtd_ram
/dev/stl0/14 11.0M 1.7M 9.2M 16% /mtd_rwarea
/dev/tbml8 60.0M 51.0M 8.9M 85% /mtd_exe
/dev/tbml9 28.6M 28.6M 0 100% /mtd_appdata
/dev/stl0/13 189.0M 152.8M 36.2M 81% /mtd_tlib
/dev/stl0/15 50.0M 2.5M 47.4M 5% /mtd_contents
/dev/stl0/16 87.9M 15.2M 72.7M 17% /mtd_down
/dev/stl0/12 149.0M 224.0k 148.8M 0% /mtd_wiselink
/dev/stl0/17 87.0M 176.0k 86.8M 0% /mtd_swu
/dev/sda1 3.9G 87.3M 3.8G 2% /dtv/usb/sda1

===================PartitionSwitch*=================

-rwxr-xr-x 1 root 0 0 Jan 1 1980 /mtd_rwarea/PartitionSwitch_0_0

======================Version*======================

-rwxr-xr-x 1 root 0 43 Jan 1 1980 /mtd_rwarea/Version.0

SWU_T-CHL7DEUC_003001_I02_EK000DK000_100421
=========================end========================

What is ExLink debug? Take cable and connect. I hope you set rs232 to debug.

Can be problems with tv`s internal flash, wich script can`t handle.

thanks for reply,

I ordered the cable, I enabled debugging on the menu that I hope you say?

ok. log from the tv start here. please

I bought this cable:

https://shop.strato.de/epages/63174191. ... cts/AXE026

but I can not connect with putty

I can only get this with putty:

??
?

this means you don`t get cable working properly. Check wires, mke short of tx and rx and if ok, you have see what you type. This what you get is only electric noise...

thanks for reply,

I check if it works as well?

also check connection paramethers, you will find those on wiki.

through the board with a multimeter I checked the connections and I have redone following the pattern of the wiki, I got this message:

"&677w??
>> ONBOOT :: 0x59a50219 0x12821282
[SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS1) Setup!!!
[SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[SERIAL INPUT MANAGE] enable_serial : debug(len: 5)

[28_64_512] Linux version 2.6.18_SELP-ARM (ksh921@sp) (gcc version 4.2.0 2007051
4 (GPL2) (SELP 4.2.0-3.0.5.custom 2007-10-31(14:53))) #81 PREEMPT Mon Jun 22 10:
10:31 KST 2009
================================================================================

SAMSUNG: v2.6.18_SELP_3.X_GA_bayhill+/A1(P24)
(Detailed Information: /sys/selp/vd/lspinfo/summary)

================================================================================

[SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS1) is freed !!!
[SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS1) Setup!!!
[SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[SERIAL INPUT MANAGE] enable_serial : debug(len: 5)

[SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS1) is freed !!!
[SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS1) Setup!!!
[SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[SERIAL INPUT MANAGE] enable_serial : debug(len: 5)

init started: SELP-BusyBox(GPL2) v1.2.2-Samsung.Common.Linux (2008.12.24-18:59+
0000) multi-call binary
Starting pid 24, console /dev/ttyS1: '/etc/rcS'
/etc/rc.local start!!!!
boot script rc.local start!!!
=====================================================
ROOTFS VERSION : 28_64_512-29 T-CHL7DEUC
BOOT VERSION : 28_64_512-38
=====================================================
/mtd_rwarea/PartitionSwitch_1_0 is detected...
2nd Partition is selected...
Unable to handle kernel paging request at virtual address d345403c
pgd = cc380000
[d345403c] *pgd=6bef6011, *pte=00000000, *ppte=00000000
Internal error: Oops: 7 [#1]
Modules linked in: rfs fsr_stl fsr
CPU: 0
PC is at sys_init_module+0xb84/0x1770
LR is at 0x28
pc : [<c005d864>] lr : [<00000028>] Tainted: P
sp : cc35fee0 ip : cc35fec8 fp : cc35ffa4
r10: d3345b28 r9 : d30a1000 r8 : d335de60
r7 : bf191544 r6 : bf37bba0 r5 : cc35e000 r4 : 00000000
r3 : d3454030 r2 : 000005d0 r1 : 0000fff2 r0 : 0000fff1
Flags: nzCv IRQs on FIQs on Mode SVC_32 Segment user
Control: C5387F
Table: 6C380000 DAC: 00000015
Process insmod (pid: 41, stack limit = 0xcc35e250)
Stack: (0xcc35fee0 to 0xcc360000)
fee0: c026176c c006f590 bf37bbac c06a9120 00000000 00000000 00000000 00000000
ff00: 00000000 00000000 00000000 00000000 00000f66 00000000 00000000 00000f64
ff20: 00000000 00000000 d33bb418 cc19a700 d338a9d8 d3387080 00000eb8 00000000
ff40: 0000309f 0000005d bf190f74 00001001 cc35e000 d334afe8 cc35ff74 d335de88
ff60: d335de60 c0151620 d338aa00 000011e3 00000000 c026176c 00000002 00000008
ff80: 00000000 00000000 00000080 c001ffe8 cc35e000 00000000 00000000 cc35ffa8
ffa0: c001fe40 c005ccec 00000008 00000000 40000000 00377b78 00153158 00000004
ffc0: 00000008 00000000 00000000 00000080 00153140 00124398 00000002 00151c9c
ffe0: bea557b8 bea557a8 000183cc 000a9840 00000010 40000000 ffffffff ffefffff
Backtrace:
[<c005cce0>] (sys_init_module+0x0/0x1770) from [<c001fe40>] (ret_fast_syscall+0x
0/0x2c)
Code: e3530000 13a0e028 05962160 1023839e (1593200c)
Segmentation fault

----------- Kernel Loading End------------

Application is started..
##### System Execution!!! #####
~~[SSPF] [FastBoot.cpp] Initialize, FAST INIT
TDaStore Building...
TDaTuner0 Building...
TDaDemodulator0 Building...
TDaTuner1 Building...
TDaDemodulator0 Building...
TDaTuner2 Building...
TDaDemodulator1 Building...
TDaTuner Building...
TDaDemodulator Building...
TDaTuner Building...
TDaDemodulator Building...
TDaAudioAmp0 Building...
TDaAudioAmp1 Building...
TDaSystem Building...
TDaAudioProcessor Building...
TDaScaler0 Building...
TDaScaler1 Building...
TDaAnalogVideoProcessor Building...
TDaDemux 0 Building...
TDaDemux 1 Building...
TDaMpeg Building...
TDaCompProcessor Building...
TDaHdmiProcessor Building...
TDaPcProcessor Building...
TDaHdmiSwitch Building...
TDaCommonInterface Building...
TDaFeeder Building...
TDaImage Building...
TDaTeleText Building...
TDaRecorder Building...
TDaAnalogVideoSwitch Building...
TDaStore PC DDC Building...
TDaStore HDMI1 DDC Building...
TDaStore HDMI2 DDC Building...
TDaStore HDMI3 DDC Building...
TDaStore HDMI4 DDC Building...
FRCQ TDaPanel0[LCD] Building...
TDaVideoEnhancer0[LCD] Building...
TDaPanel1[PDP] Building...
TDaVideoEnhancer1[PDP] Building...

>>[ERR:TDcChelseaGpio.cpp] Write():161 GPIO_SetOut() returns error -1! G
PIO Port : 0


>>[ERR:TDcChelseaGpio.cpp] Read():129 GPIO_GetIn() returns error -1! GPI
O Port : 1


>>[ERR:TDcChelseaGpio.cpp] Read():129 GPIO_GetIn() returns error -1! GPI
O Port : 2


>>[ERR:TDcChelseaGpio.cpp] Read():129 GPIO_GetIn() returns error -1! GPI
O Port : 3


>>[ERR:TDcChelseaGpio.cpp] Write():161 GPIO_SetOut() returns error -1! G
PIO Port : 5


>>[ERR:TDcChelseaGpio.cpp] Write():161 GPIO_SetOut() returns error -1! G
PIO Port : 6


>>[ERR:TDcChelseaGpio.cpp] Read():129 GPIO_GetIn() returns error -1! GPI
O Port : 7


>>[ERR:TDcChelseaGpio.cpp] Write():161 GPIO_SetOut() returns error -1! G
PIO Port : 256


>>[ERR:TDcChelseaGpio.cpp] Write():161 GPIO_SetOut() returns error -1! G
PIO Port : 257


>>[ERR:TDcChelseaGpio.cpp] Write():161 GPIO_SetOut() returns error -1! G
PIO Port : 258


>>[ERR:TDcChelseaGpio.cpp] Read():129 GPIO_GetIn() returns error -1! GPI
O Port : 259


>>[ERR:TDcChelseaGpio.cpp] Read():129 GPIO_GetIn() returns error -1! GPI
O Port : 260


>>[ERR:TDcChelseaGpio.cpp] Write():161 GPIO_SetOut() returns error -1! G
PIO Port : 261


>>[ERR:TDcChelseaGpio.cpp] Write():161 GPIO_SetOut() returns error -1! G
PIO Port : 262


>>[ERR:TDcChelseaGpio.cpp] Write():161 GPIO_SetOut() returns error -1! G
PIO Port : 1287

~~[SSPF] [FastBoot.cpp] Initialize, [ResetBoard] Thread_ID=0x40cab490 : CREATE
~~[SSPF] [FastBoot.cpp] ResetBoard, Called...
############## Find Factory.dat File in mtd_exe ##################

>>[ERR:TDcChelseaGpio.cpp] Write():161 GPIO_SetOut() returns error -1! G
PIO Port : 5


>>[ERR:TDcChelseaGpio.cpp] Write():161 GPIO_SetOut() returns error -1! G
PIO Port : 5

=== USE BSP RESET ===
~~[SSPF] [FastBoot.cpp] ResetBoard, m_semReset.Give

FixedId : Nvram[94] vs File[94]

WBId : Nvram[70] vs File[70]

EERId : Nvram[360] vs File[359]
*************EERId is different !!!!!!!!!!! saved[360] new[359]

>>[ERR:TDcChelseaGpio.cpp] Write():161 GPIO_SetOut() returns error -1! G
PIO Port : 258


>>[ERR:TDsEepromStore.cpp] Write():395 Nvram Write Error...


>>[ERR:TDcChelseaGpio.cpp] Write():161 GPIO_SetOut() returns error -1! G
PIO Port : 258


>>[ERR:TDcChelseaGpio.cpp] Write():161 GPIO_SetOut() returns error -1! G
PIO Port : 258


>>[ERR:TDsEepromStore.cpp] Write():417 Nvram Write Error...


>>[ERR:TDcChelseaGpio.cpp] Write():161 GPIO_SetOut() returns error -1! G
PIO Port : 258


FACId : Nvram[89] vs File[89]
=== Chelsea register = 0x27106c0 is CHELSEA2