SamyGO

Hello,
I have an UExxD6000 tv and i've installed samygo on it. However, I would like to have ftp access also when the tv is in standby.
I've learned from here:
http://wiki.samygo.tv/index.php5/SamyGO ... re_Patcher
that I need to patch the firmware in order to have this.
The problem is that I cannot find these old firmwares, the links from here:
http://wiki.samygo.tv/index.php5/Old_%26_Good_Firmwares
are not working

Could you post this firmware somewhere ?

Also, currently I'm running TGAS6DEUC-1010.9 I guess, is it ok if I patch a newer one and install that one over USB ?
I guess It should work this way, right ?

Thanks in advance.

No way, this is for B series only. You can't install patched firmware on D series.

I was afraid of this.
So is there a way for the D series to have at least FTP when the unit is in standby ?

StandBy means StandBy.

http://en.wikipedia.org/wiki/Standby wrote: Sleep mode (in electronics), also known as standby-mode - a mode in which electronic appliances are turned off but under power and ready to activate on command
Standby power energy consumed by an electronic device while it is turned off

No comments

Normally linux-based devices do not turn off during standby -> I have several linux-based euquipement which are still accessible via ssh, telnet or ftp even if they are in standby. (see a dreambox or any other satellite receiver, or any linux-based media player)
I thought that the mainboard is not powered down (almost) completely when the TV is turned off and that running an ftp server is still possible on it. That's the reason why I was asking.

TV is not normal linux-based device. Ethernet port and other hw is off.

Thanks for the info.
Now it's sure that it's accessible only when it's on
You have helped me a lot, you deserve a couple of beers. Too pity that you're from Luthuania and I'm from Romania