Hello!
I buy this product: http://www.ebay.de/itm/350568364250
Now I want to connect with an VGA cable Like this:
Do I need to connect the 3V3 or VCC Port anywhere?
Thank you for the help!
sowiso
USBtoTTL-Adapter on VGAExLink
Re: USBtoTTL-Adapter on VGAExLink
No. Neither 3,3 nor 5v. You just have to use rx, tx and GND.
Like here:
Like here:
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: USBtoTTL-Adapter on VGAExLink
Thank you. Than I will do it like this
Re: USBtoTTL-Adapter on VGAExLink
I do not get it to work on my D7000 TV. Could it be that I need a 3.5 jack like this?
Re: USBtoTTL-Adapter on VGAExLink
UExxD7000 exlink is on VGA.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: USBtoTTL-Adapter on VGAExLink
I post because there is nothing on my console. But the wires are conected. My Problem is that I can not enable RS232 like it is described for C/D series:
[MENU] [MUTE] [POWER] --> Enter the Control menu and set the value of the RS232 mode to Debug.
The service menu is like it is described for the E series:
The service menu is like it is described for the E series:
[MENU] [MUTE] [POWER] --> Control -> Sub Option -> RS-232 Jack -> to DEBUG
And I think the jack is an indicator for 3.5 and not VGA. But I'm not quite sure.
And I think the jack is an indicator for 3.5 and not VGA. But I'm not quite sure.
Re: USBtoTTL-Adapter on VGAExLink
I`m sure, believe me.
Check your cable pins, make loopback test: connect the TX and RX pins and check what you type should appear on the terminal.If nothing on the terminal - means your cable is not working.
Check cable drivers.
Also cable length sometimes is important.
Connection parameters.
Check your cable pins, make loopback test: connect the TX and RX pins and check what you type should appear on the terminal.If nothing on the terminal - means your cable is not working.
Check cable drivers.
Also cable length sometimes is important.
Connection parameters.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: USBtoTTL-Adapter on VGAExLink
ok loopback works. I connect the usbadapter to a vga cable (for monitor) ... maybe this is a problem. Should I try it with something like this?
http://www.ebay.de/itm/15-Pin-Male-VGA- ... 27c34a458c
http://www.ebay.de/itm/15-Pin-Male-VGA- ... 27c34a458c
Re: USBtoTTL-Adapter on VGAExLink
Omg. Sure dont use monitor cable...
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: USBtoTTL-Adapter on VGAExLink
Yes I already think about that this is not the best solution. But it was the easiest way
Than I will order this adapter. Hope it works out
Than I will order this adapter. Hope it works out