SamyGO

Posted: **Wed Aug 08, 2012 3:04 pm**

I'm in the process of fixing an LA32D450.

It is an Australian model, but bad caps suspected of taking out main board, so I replaced the main board with one from the USA (because it was cheap).

I was just about to start playing around to try and make the TV work on Australian DTV services (no doubt by using the leet skilz here!) but now somehow the service mode has stopped working.

Can I have locked out the service mode somehow?

Posted: **Thu Aug 09, 2012 1:14 pm**

Still unable to get into service mode. I have tried a different Sammy remote, I have tried resetting the TV via pressing exit for 10 seconds (which worked).

Next step the eeprom bypass?

Posted: **Thu Aug 09, 2012 2:51 pm**

Support-Contact Samsung advises me that the firmware is T-MST4AUSC-1018.1

Posted: **Sat Aug 11, 2012 5:16 am**

Anyone? Service mode WAS working, but I can't access it anymore (Mute-1-8-2-power)

Posted: **Sat Aug 11, 2012 6:30 am**

Unplug tv for 15 min and try again?
If no success, send info + factory IR codes (wav way, factory rc, arduino etc ... all on wiki. Sorry no link, im on tapatalk). Or try reset eeprom by shortening pins.

Posted: **Sat Aug 11, 2012 12:13 pm**

Some links :
http://wiki.samygo.tv/index.php5/Enteri ... Setup_Menu
http://wiki.samygo.tv/index.php5/Remote ... ransmitter
http://wiki.samygo.tv/index.php5/Ethern ... _Interface

SamyGO

Possible to lockout service mode? (LN32D450)

Possible to lockout service mode? (LN32D450)

Re: Possible to lockout service mode? (LN32D450)

Re: Possible to lockout service mode? (LN32D450)

Re: Possible to lockout service mode? (LN32D450)

Re: Possible to lockout service mode? (LN32D450)

Re: Possible to lockout service mode? (LN32D450)