Page 1 of 1
Samsung LFD Display- MD32B
Posted: Fri Sep 07, 2012 9:34 am
by rinosh1989
Does anyone have an idea on how to install SamyGo on my TV - MD32b. It has a software Magicinfo Lite installed in it.
Re: Samsung LFD Display- MD32B
Posted: Sun Sep 23, 2012 7:11 am
by juusso
No experience with this model. But you can help us. All what is needed - to collect all possible info. Start reading our forum (maybe D series?) and try to get shell access. If i was you, i would start from building ExLink cable...
Re: Samsung LFD Display- MD32B
Posted: Mon Aug 22, 2022 10:54 pm
by Lishoo
Hello!
The LFD back looks like this:
c0f43b484a17aaa384ea9dfdbb90.jpg
There is no port labeled ex-link, but there are two RS232c ports IN/OUT
In the manual I have found some info about the RS232c port
samsung rs232.png
samsung rs232 cable.png
I tried to use cross-linked RS232 cable, but PUTTY collected only some garbage when buttons on the remote were pressed.
Is it possible that I need to cut-off all pins except 2,3,5 to communicate with the display?
-----------------------------------------------
SERVICE MENU
[MUTE] 1 8 2 [POWER]
20220821_222355.jpg
20220821_222518.jpg
Re: Samsung LFD Display- MD32B
Posted: Tue Aug 23, 2022 7:50 pm
by Lishoo
20220821_222539.jpg
20220821_222458.jpg
20220821_222614.jpg
20220821_222449.jpg
20220821_222420.jpg
Re: Samsung LFD Display- MD32B
Posted: Tue Aug 23, 2022 7:51 pm
by Lishoo
20220821_222332.jpg
20220821_222317.jpg
20220821_222304.jpg