Mainboard replace: c530/550 and c630 TO c650/c679, get PVR !
- beatfreak
- SamyGO Project Donor
- Posts: 591
- Joined: Tue Aug 23, 2011 9:03 am
- Location: Hamburg
- Contact:
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
ard/zdf/wdr..... mediathek is a smarthub abb and therefore available since D series, C has only internet@tv
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with
If you can't fix it using dvct tape, you are not using enough dvct tape.
FYI: you can close your ssh session with SamyGO with
Code: Select all
~.
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
Still wasn't able to get my hands on one of these mainboards. Any alternative to get PVR function going - like a board from a C6500 maybe?TOMillr wrote:Can anyone point me to a webstore or ebay buyer who still sells a replacement mainboard for upgrading my C6000?
-
- Posts: 5
- Joined: Sat Nov 02, 2013 7:00 pm
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
Hello,
if upgrading from c530 to c650 works (I give it a try) - do i need a different remote control?
BR
S
if upgrading from c530 to c650 works (I give it a try) - do i need a different remote control?
BR
S
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
Can be replaced motherboard in c550?
To the right.
To the right.
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
I've just tried to replace the mainboard on my C6000 series tv with a new BN94-03406M board. While the replacement process was rather easy, the board doesn't seem to work properly:
When I power up the tv, the picture is all distorted (see attached picture). After a couple of seconds the tv then shuts down and reboots again. This circle continuos until I pull the power plug.
Any idea what's going on here?
When I power up the tv, the picture is all distorted (see attached picture). After a couple of seconds the tv then shuts down and reboots again. This circle continuos until I pull the power plug.
Any idea what's going on here?
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
is here any output on Exlink cable? Like hardware incompatibility. Try to reset EEPROM, maybe it stuck on values for C6000
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
Sorry, I'm not familiar with this "exlink cable" you've mentioned. Do you have a link I can have a look at to get some more informations?
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
http://wiki.samygo.tv/index.php5/UnBric ... OM_chip.3Fjuuso wrote:Try to reset EEPROM, maybe it stuck on values for C6000
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
Hm, so I have to solder a wire onto the two pins of the EEPROM to reset the chip? Or is there another way to do this?
Before I do that, I'd like to make sure that the board itself is working properly. The BN94-03406M board is a replacement part for a UE40C6700 tv. Should that one work with my UE46C6000?
I also don't understand how some C6000 values should have made it's way to the EEPROM on the new C6700 board.
Before I do that, I'd like to make sure that the board itself is working properly. The BN94-03406M board is a replacement part for a UE40C6700 tv. Should that one work with my UE46C6000?
I also don't understand how some C6000 values should have made it's way to the EEPROM on the new C6700 board.
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
My fault, it isn`t. I was thinking something else.TOMillr wrote:I also don't understand how some C6000 values should have made it's way to the EEPROM on the new C6700 board.
But anyway, eeprom reset may help in this situation. You don`t need to solder anything, it is enough to make short circuit with some metalic toy at the boot time of tv.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE