oops, seems script name must run.sh, placed on root of USB.juuso wrote:Oh yes, all Fir* patched firmwares have usbhotplug patch enabled. Take fat formatted usb and script (made under linux or if on windows, then with notepad++ or other robust editor, save ANSI encoding)While BD is powered on, attach USB and waitCode: Select all
#!/bin/sh rm -rf /mtd_rwarea/user.sh insmod /mtd_exe/fpi.ko /etc/Scripts/MicomCtrl 143
p.s. ExLink cable won`t help here because of input filtration.BUT!!! You should have chance to run emergency script (CB), which loads usb driver (if not yet loaded) and this forces to execute run.sh. Now i will check exact filename what you have to type to limitet console trough exlink. If this won`t help, then:
Your next steps:
1. get exlink working and accepting commands (doesnt matter, this will be limited input A...F, 0...9)
2. attach USB with run.sh wit code (slightly modified):
Code: Select all
#!/bin/sh
rm -rf /mtd_rwarea/user.sh
insmod /mtd_exe/fpi.ko
/etc/Scripts/MicomCtrl 143
4. Menu should appear. Select 1 (1. Copy log to USB)
5. This powers USB and usbhotplug patch drives script to be executed. Unit should reboot. But if not, wait few minutes, disconnect power cable, remove USB and power on it again.
ExLink cable connection to your device is tricky, you have to solder required pins like is shown here.(check first, i can`t find your model listed there, perhaps needed to do some research, perhaps you find similar to wikified pins on your board...)