Page 1 of 3
Pvr over Nfs
Posted: Sun May 12, 2013 8:48 pm
by ocean
Hey Guys
I know that the question was asked many times before, but I (and maybe other users too) still got a problem by config my init-files for pvr over nfs. I don't know exactly what to change in these files and I also don't know if the the xfs-Image is still needed or even where I have to store it on the nfs-share. Also I think it's good to know if we can use the same adjusts for C-,D- and E-Series.
My adjusted nfs-shares are on a fritzbox 7320 with freetz running. The exports-file on the "server" is:
Code: Select all
the ip of server is: 192.168.2.2
exports:
/var/media/ftp/Nfs-Filme/Videos *(rw,anonuid=0,anongid=0,insecure,async,fsid=0,no_subtree_check)
/var/media/ftp/Nfs-Platte *(rw,anonuid=0,anongid=0,insecure,async,fsid=0,no_subtree_check)
The shares were found in standard config of all samygo init-files. The first share only offers the videos to watch on the tvs, the second one is an own hdd only for pvr (if possible for both tvs the same pvr storage).
So I think the shares are correct.
But where do I need to change the init files.
Kind regards ocean
P.S.: If everything is running fine I offer to write a wiki entry...
Re: Pvr over Nfs
Posted: Mon May 27, 2013 2:11 pm
by ocean
Even if nobody answered on my question I got the "PVR over NFS" working now. I even didn't use the vusb-script neither the record-to-nwshare-script. I built everything inside the nfsmount-script as you can see here in the code comment, which is copied and modified by the code parts I found here in forum:
Code: Select all
#!/bin/sh
#
# ? Copyright 1996-2010, ZsoltTech.Com
# by Ser Lev Arris <arris@ZsoltTech.Com>
#
# donated for the SamyGo Project
# http://samygo.sourceforge.net/
# depending on some other coders of the samygo-forum and also on
# Version: SamyGO svn $Id: 03_03_nfsmount.init 1069 2011-01-03 16:47:24Z arris69 $
#############-Some Variables-####################
V_USB="sdj" # Aka name usb-device with 1 partition
R_USB="sdk" # Aka name record-device
USB_NAME="Movies" # symbolic name of usb-device
REC_NAME="Recorder" # symbolic name of record-device
###############################################
sed -i -e "s,MountPlaceholder,/dtv/usb/${V_USB}," /dtv/SGO.env
sed -i -e "s,MountPlaceholder,/dtv/usb/${R_USB}," /dtv/SGO.env
. /dtv/SGO.env
# Share_X = '<ServerIP>:<SHAREPATH>:<NAME_OF_MOUNT>'
# RECORDSHARE='<ServerIP>:<SHAREPATH>'
RECORDSHARE='192.168.2.2:/var/media/ftp/Nfs-Filme/Recorder/Wohnzimmer'
SHARE_1='192.168.2.2:/var/media/ftp/Nfs-Filme/Videos:Movies'
FR_NAME="NFS Server"
M_OPTS="soft,tcp,nolock"
SERVERS="Don't set me!!"
DEST_DIR=$MOUNT_PATH
RECDIR=/dtv/usb/${R_USB}
do_mount()
{
if [ -n "$3" ]; then
# M_POINT="$DEST_DIR/$3" # with name of directory
M_POINT="$DEST_DIR" # mount direct so that there only will be the hierarchy tree you have in your share
else
M_POINT="$DEST_DIR/$1/$(echo -n "$2" | sed -e "s/\//_/g")"
fi
mkdir -p "$M_POINT"
if [ `cat /proc/mounts | grep -c "$M_POINT"` -lt "1" ] ; then
/bin/busybox mount -o "$M_OPTS" "$1:$2" "$M_POINT"
if [ $? = 0 ]; then
echo "Share $1:$2 successfully mounted on $M_POINT"
else
echo "Error during mount of $1:$2 on $M_POINT"
fi
else
echo "Share $1:$2 is already mounted!"
fi
}
mount_record()
{
if [ -n "$RECORDSHARE" ]; then
M_POINTREC="$RECDIR"
mkdir -p "$M_POINTREC"
if [ `cat /proc/mounts | grep -c "$M_POINTREC"` -lt "1" ] ; then
/bin/busybox mount -o "$M_OPTS" "$1:$2" "$M_POINTREC"
if [ $? = 0 ]; then
echo "NFS_PATH=$M_POINTREC" >> /dtv/SGO.env
mount -t xfs -o loop "$RECDIR"/PVR/pvrimage" "$RECDIR"/PVR/Wohnzimmer"
echo "Share $1:$2 successfully mounted on $M_POINTREC"
else
echo "Error during mount of $1:$2 on $M_POINTREC"
fi
else
echo "Share $1:$2 is already mounted!"
fi
fi
}
get_shares()
{
ENDARRAY=false
N=1
while [ $ENDARRAY = false ]
do
eval SHARE=\${SHARE_${N}}
if [ -z "$SHARE" ]; then
ENDARRAY=true
else
SERVER=`echo "$SHARE"|cut -d ':' -f1`
SHPATH=`echo "$SHARE"|cut -d ':' -f2`
SHNAME=`echo "$SHARE"|cut -d ':' -f3`
echo -n "Check if server $SERVER is reachable..."
showmount --no-header -e $SERVER 1>/dev/null 2>&1
if [ $? = 0 ]; then
echo 'ok'
do_mount "$SERVER" "$SHPATH" "$SHNAME"
else
echo 'NOT reachable skip!'
fi
let N=N+1
fi
done
if [ -n "$RECORDSHARE" ]; then
RECSERVER=`echo "$RECORDSHARE"|cut -d ':' -f1`
RECSHPATH=`echo "$RECORDSHARE"|cut -d ':' -f2`
echo -n "Check if server $RECSERVER is reachable..."
showmount --no-header -e $RECSERVER 1>/dev/null 2>&1
if [ $? = 0 ]; then
RECAVAIL=true
echo 'ok'
mount_record "$RECSERVER" "$RECSHPATH"
sleep 5 # it is even working without the sleep in my case
else
echo "$RECSERVER NOT reachable skip!"
RECAVAIL=false
fi
else
echo "No Record-Share available!"
fi
}
get_servers()
{
if [ -z "$SERVER" ] ; then
# SERVERS=$(cat /proc/net/arp | grep -v "IP address" | cut -d " " -f1)
SERVERS=$(cat /proc/net/arp | grep -v "IP address" | sed 's/^\(\w*.\w*.\w*.\w*\) *.*/\1/')
else
SERVERS=$SERVER
fi
}
anounce_usb()
{
if [ -e /dtv/usb/usblog ] ; then
echo ""
else
touch /dtv/usb/usblog
fi
if [ `cat /dtv/usb/usblog | grep -c "$V_USB"` -lt "1" ] ; then
cp -f /dtv/usb/usblog /dtv/usb/usblog.bak
#### VIRTUALUSB "NFS-SERVER" ####
if [ `cat /proc/mounts | grep -c "$M_POINT"` > "0" ] ; then
echo -e "[$V_USB]\nVendor : Home\nProduct : $USB_NAME\nSerial : 30122011\nDevpath : 7\n\
Lun : 0\nScsiDevicePath : /dev/${V_USB}1\nMountDir : $DEST_DIR\nFileSystem : vfat\n" >> /dtv/usb/usblog
else
echo "No Nfs-Share mounted!"
fi
#### VIRTUALUSB "RECORDER" ####
if [ -n "$RECORDSHARE" ]; then
if [ `cat /proc/mounts | grep -c "$M_POINTREC"` > "0" ] && [ $RECAVAIL = true ] ; then
echo -e "[$R_USB]\nVendor : Home\nProduct : $REC_NAME\nSerial : 21052013\nDevpath : 8\n\
Lun : 1\nScsiDevicePath : /dev/${R_USB}1\nMountDir : $RECDIR\nFileSystem : xfs\n" >> /dtv/usb/usblog
else
echo "No Record-Share mounted!"
fi
fi
fi
}
case $1 in
start)
# for systems with modular nfs kernel support
insmod $MOD_DIR/kernel/net/sunrpc/sunrpc.ko
insmod $MOD_DIR/kernel/fs/lockd/lockd.ko
insmod $MOD_DIR/kernel/fs/nfs/nfs.ko
get_servers
get_shares
anounce_usb
;;
stop)
# may can fail if device access the mount from content library
# for i in $(cat /proc/mounts | grep nfs | cut -d " " -f2) ; do
cp -f /dtv/usb/usblog.bak /dtv/usb/usblog
for i in $(cat /proc/mounts | grep "$DEST_DIR" | sed 's/^\(.*\) \(.*\) nfs .*/\2/') ; do
/bin/busybox umount $i
done
for i in $(cat /proc/mounts | grep "$RECDIR" | sed 's/^\(.*\) \(.*\) nfs .*/\2/') ; do
/bin/busybox umount $i
done
;;
status)
/bin/mount | grep "$DEST_DIR"
/bin/mount | grep "$RECDIR"
;;
*)
echo "Usage: $0 {start|stop|status}" 1>&2
exit 0
;;
esac
It's maybe a little bit dirty coding, but for me it is working with this version on my UE32D6510 and also on the UE46ES6710.
I just leave it here if anybody else needs something to start one thinking.
Regards ocean
P.S.: Would be great if anybody could give me an answer about how to disable DRM on the ES I asked already there ->
viewtopic.php?f=53&t=5224
Re: Pvr over Nfs
Posted: Mon May 27, 2013 2:22 pm
by juusso
thanks for sharing!
Re: Pvr over Nfs
Posted: Mon May 27, 2013 2:25 pm
by ocean
no problem juuso, your welcome
Re: Pvr over Nfs
Posted: Tue May 28, 2013 12:56 pm
by miazza
Really interesting job.
Do you this there is any chance to have it working also over samba ?
miazza
Re: Pvr over Nfs
Posted: Tue May 28, 2013 1:01 pm
by ocean
I don't know. I was happy when all was running on nfs.
Re: Pvr over Nfs
Posted: Fri Jul 05, 2013 10:46 am
by mmhorda
ocean wrote:I don't know. I was happy when all was running on nfs.
Amazing.
its working! Thanks a lot for sharing
Edit:
I was just thinking i will write what i have tested it on.
UE40D6100 - T-GAS6DEUC 1014.0
UE50ES6300 - T-MST10PDEUC 1030.0
Re: Pvr over Nfs
Posted: Fri Jul 05, 2013 10:55 am
by ocean
You're welcome mmhorda.
Re: Pvr over Nfs
Posted: Wed Jul 31, 2013 11:17 am
by ocean
Got a little update for everybody who is also willing to play records from a D-Series Tv with drm disabled, on a E-Series Tv with nfs shares:
Code: Select all
#!/bin/sh
######################### Some Variables ##########################
V_USB="sdi" # Aka name first usb-device with 1 partition
V2_USB="sdj" # Aka name second usb-device with 1 partition
R_USB="sdk" # Aka name record-device
###################################################################
# RECORDSHARE='<ServerIP> : <SHAREPATH> :<NAME_OF_MOUNT>'
RECORDSHARE='192.168.2.2:/var/media/ftp/Nfs-Platte/Recorder/Wohnzimmer:Recorder'
# Share_X=' <ServerIP>: <SHAREPATH> :<NAME_OF_MOUNT>'
SHARE_1='192.168.2.2:/var/media/ftp/Nfs-Filme/Videos:Movies'
SHARE_2='192.168.2.2:/var/media/ftp/Nfs-Platte/Recorder/Schlafzimmer/CONTENTS:Aufnahmen'
M_OPTS="soft,tcp,nolock"
SERVERS="Don't set me!!"
DEST_DIR_1=/dtv/usb/${V_USB}
DEST_DIR_2=/dtv/usb/${V2_USB}
RECDIR=/dtv/usb/${R_USB}
do_mount()
{
if [ -n "$3" ]; then
eval M_POINT${4}="\$DEST_DIR_${4}" # directly to virtual-usb device
else
eval M_POINT${4}="\$DEST_DIR_${4}/$1/$(echo -n "$2" | sed -e "s/\//_/g")"
fi
eval mkdir -p "\$M_POINT${4}"
if [ `cat /proc/mounts | grep -c eval "\$M_POINT${4}"` -lt "1" ] ; then
eval /bin/busybox mount -o "$M_OPTS" "$1:$2" "\$M_POINT${4}"
if [ $? = 0 ]; then
eval echo "Share $1:$2 successfully mounted on \$M_POINT${4}"
else
eval echo "Error during mount of $1:$2 on \$M_POINT${4}"
fi
else
echo "Share $1:$2 is already mounted!"
fi
}
mount_record()
{
if [ -n "$RECORDSHARE" ]; then
M_POINTREC="$RECDIR"
mkdir -p "$M_POINTREC"
if [ `cat /proc/mounts | grep -c "$M_POINTREC"` -lt "1" ] ; then
/bin/busybox mount -o "$M_OPTS" "$1:$2" "$M_POINTREC"
if [ $? = 0 ]; then
mount -t xfs -o loop "$RECDIR"/PVR/pvrimage" "$RECDIR"/PVR/Wohnzimmer"
echo "Share $1:$2 successfully mounted on $M_POINTREC"
else
echo "Error during mount of $1:$2 on $M_POINTREC"
fi
else
echo "Share $1:$2 is already mounted!"
fi
fi
}
get_shares()
{
ENDARRAY=false
N=1
while [ $ENDARRAY = false ]
do
eval SHARE=\${SHARE_${N}}
if [ -z "$SHARE" ]; then
ENDARRAY=true
else
SERVER=`echo "$SHARE"|cut -d ':' -f1`
SHPATH=`echo "$SHARE"|cut -d ':' -f2`
SHNAME=`echo "$SHARE"|cut -d ':' -f3`
echo -n "Check if server $SERVER is reachable..."
showmount --no-header -e $SERVER 1>/dev/null 2>&1
if [ $? = 0 ]; then
echo 'ok'
eval USB_NAME${N}="$SHNAME" # to get the names out of the share-path
do_mount "$SERVER" "$SHPATH" "$SHNAME" "$N"
else
echo 'NOT reachable skip!'
fi
let N=N+1
fi
done
if [ -n "$RECORDSHARE" ]; then
RECSERVER=`echo "$RECORDSHARE"|cut -d ':' -f1`
RECSHPATH=`echo "$RECORDSHARE"|cut -d ':' -f2`
REC_NAME=`echo "$RECORDSHARE"|cut -d ':' -f3`
echo -n "Check if server $RECSERVER is reachable..."
showmount --no-header -e $RECSERVER 1>/dev/null 2>&1
if [ $? = 0 ]; then
RECAVAIL=true
echo 'ok'
mount_record "$RECSERVER" "$RECSHPATH"
sleep 5
else
echo "$RECSERVER NOT reachable skip!"
RECAVAIL=false
fi
else
echo "No Record-Share available!"
fi
}
get_servers()
{
if [ -z "$SERVER" ] ; then
# SERVERS=$(cat /proc/net/arp | grep -v "IP address" | cut -d " " -f1)
SERVERS=$(cat /proc/net/arp | grep -v "IP address" | sed 's/^\(\w*.\w*.\w*.\w*\) *.*/\1/')
else
SERVERS=$SERVER
fi
}
anounce_usb()
{
if [ -e /dtv/usb/usblog ] ; then
echo ""
else
touch /dtv/usb/usblog
fi
if [ `cat /dtv/usb/usblog | grep -c "$V_USB"` -lt "1" ] ; then
cp -f /dtv/usb/usblog /dtv/usb/usblog.bak
#### VIRTUALUSB1 "Movies" ####
if [ `cat /proc/mounts | grep -c "$M_POINT1"` > "0" ] ; then
echo -e "[$V_USB]\nVendor : Home\nProduct : $USB_NAME1\nSerial : 30122011\nDevpath : 7\n\
Lun : 0\nScsiDevicePath : /dev/${V_USB}1\nMountDir : $DEST_DIR_1\nFileSystem : vfat\n" >> /dtv/usb/usblog
else
echo "Share1 not mounted!"
fi
#### VIRTUALUSB2 "Aufnahme" ####
if [ `cat /proc/mounts | grep -c "$M_POINT2"` > "0" ] ; then
echo -e "[$V2_USB]\nVendor : Home\nProduct : $USB_NAME2\nSerial : 30122011\nDevpath : 7\n\
Lun : 0\nScsiDevicePath : /dev/${V2_USB}1\nMountDir : $DEST_DIR_2\nFileSystem : vfat\n" >> /dtv/usb/usblog
else
echo "Share2 not mounted!"
fi
#### VIRTUALUSB "RECORDER" ####
if [ -n "$RECORDSHARE" ]; then
if [ `cat /proc/mounts | grep -c "$M_POINTREC"` > "0" ] && [ $RECAVAIL = true ] ; then
echo -e "[$R_USB]\nVendor : Home\nProduct : $REC_NAME\nSerial : 21052013\nDevpath : 8\n\
Lun : 0\nScsiDevicePath : /dev/${R_USB}1\nMountDir : $RECDIR\nFileSystem : xfs\n" >> /dtv/usb/usblog
else
echo "Record-Share not mounted!"
fi
fi
fi
}
case $1 in
start)
insmod $MOD_DIR/kernel/net/sunrpc/sunrpc.ko
insmod $MOD_DIR/kernel/fs/lockd/lockd.ko
insmod $MOD_DIR/kernel/fs/nfs/nfs.ko
get_servers
get_shares
anounce_usb
rm "$DEST_DIR_2"/*.mkv
for i in "$DEST_DIR_2"/*.srf; do ln -s "$i" "${i/.srf}".mkv; done
;;
stop)
# may can fail if device access the mount from content library
# for i in $(cat /proc/mounts | grep nfs | cut -d " " -f2) ; do
cp -f /dtv/usb/usblog.bak /dtv/usb/usblog
for i in $(cat /proc/mounts | grep "$DEST_DIR_1" | sed 's/^\(.*\) \(.*\) nfs .*/\2/') ; do
/bin/busybox umount $i
done
for i in $(cat /proc/mounts | grep "$DEST_DIR_2" | sed 's/^\(.*\) \(.*\) nfs .*/\2/') ; do
/bin/busybox umount $i
done
for i in $(cat /proc/mounts | grep "$RECDIR" | sed 's/^\(.*\) \(.*\) nfs .*/\2/') ; do
/bin/busybox umount $i
done
;;
status)
/bin/mount | grep "$DEST_DIR_1"
/bin/mount | grep "$DEST_DIR_2"
/bin/mount | grep "$RECDIR"
;;
*)
echo "Usage: $0 {start|stop|status}" 1>&2
exit 0
;;
esac
with that script I now got 3 virtual-usb devices called "Movies", "Aufnahmen" and "Recorder".
"Movies" are all the of my movies on the first nfs-share.
"Aufnahmen" is the mounted CONTENTS folder of the D-Series TV with unencrypted records.
"Recorder" the virtual-usb for the E-Series to record on.
with
Code: Select all
rm "$DEST_DIR_2"/*.mkv
for i in "$DEST_DIR_2"/*.srf; do ln -s "$i" "${i/.srf}".mkv; done
I could link to the records of the D-Series tv to get them played on the ES. Everytime the ES is booting up all links will be deleted and only any records on the D CONTENTS exists a new link will be performed. That also will keep up the right name if you activate moviemanager-script on D-Series tv, as it also deletes the links to records that no longer exists on the share.
Regards ocean
Re: Pvr over Nfs
Posted: Mon Aug 19, 2013 5:00 pm
by ocean
Has anybody a solution for deactivating the popup for the first device that is connected here in that script?