SamyGO

Code: Select all

dmesg
<5>CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv6TEJ), cr=00c5387f
<4>Machine: Samsung-SDP83 Eval. Board(64bit 256MB)
<4>Warning: bad configuration page, trying to continue
<4>Ignoring unrecognised tag 0x00000000
<4>Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 18688
<7>  DMA zone: 18688 pages, LIFO batch:3
<7>On node 1 totalpages: 9984
<7>  DMA zone: 9984 pages, LIFO batch:1
<4>CPU0: D VIPT write-back cache
<4>CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
<4>CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
<4>Built 2 zonelists.  Total pages: 28672
<5>Kernel command line: root=139:6 rw console=ttyS1 quiet
<4>WARNING: experimental RCU implementation.
<4>PID hash table entries: 512 (order: 9, 2048 bytes)
<6>Samsung DTV Linux System timer initialize
<6>sdp83 clock control (c) 2008 Samsung Electronics
<6>SDP83 Core Clock: 600.0Mhz
<6>SDP83 DDR2 Clock: 399.937Mhz
<6>SDP83 AHB Clock: 140.62Mhz
<6>SDP83 APB Clock: 140.62Mhz
<4>Samsung DTV Linux Calcurate Timer Clock 0.199 us per tick
<4>    Reset Value 0x0000c365
<4>Console: colour dummy device 80x30
<4>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>Memory: 73MB 39MB = 112MB total
<5>Memory: 110888KB available (1712K code, 875K data, 84K init)
<7>Calibrating delay loop... 599.65 BogoMIPS (lpj=2998272)
<4>Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<6>NET: Registered protocol family 16
<6>sdp83 clock control (c) 2008 Samsung Electronics
<6>SDP83 Core Clock: 600.0Mhz
<6>SDP83 DDR2 Clock: 399.937Mhz
<6>SDP83 AHB Clock: 140.62Mhz
<6>SDP83 APB Clock: 140.62Mhz
<5>SCSI subsystem initialized
<4>NetWinder Floating Point Emulator V0.97 (double precision)
<6>squashfs: version 3.1 (2006/08/19) Phillip Lougher
<6>NTFS driver 2.1.29 [Flags: R/O].
<6>Initializing Cryptographic API
<6>io scheduler noop registered (default)
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<6>SDP I2C 0 port initialize base is 0xc7800100
<6>SDP I2C 1 port initialize base is 0xc7800120
<6>SDP I2C 2 port initialize base is 0xc7800140
<6>SDP I2C 3 port initialize base is 0xc7800160
<4>Samsung SDP I2c ver 0.7 access driver
<6>Serial: S5H2X driver $Revision : 1.01 $
<5>enter serial_request_port
<6>s5h2x-uart: ttyS0 at MMIO map 0x30090a00 mem 0xf8090a00 (irq = 19) is a S5H2X
<5>enter serial_request_port
<6>s5h2x-uart: ttySD0 at MMIO map 0x30090a00 mem 0xf8090a00 (irq = 19) is a S5H2X
<5>enter serial_request_port
<6>s5h2x-uart: ttyS1 at MMIO map 0x30090a40 mem 0xf8090a40 (irq = 20) is a S5H2X
<5>enter serial_request_port
<6>s5h2x-uart: ttySD1 at MMIO map 0x30090a40 mem 0xf8090a40 (irq = 20) is a S5H2X
<5>enter serial_request_port
<6>s5h2x-uart: ttyS2 at MMIO map 0x30090a80 mem 0xf8090a80 (irq = 21) is a S5H2X
<5>enter serial_request_port
<6>s5h2x-uart: ttySD2 at MMIO map 0x30090a80 mem 0xf8090a80 (irq = 21) is a S5H2X
<4>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
<4>TinyBML init registered
<6>mice: PS/2 mouse device common for all mice
<6>NET: Registered protocol family 15
<6>VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<4>VFS: Mounted root (squashfs filesystem) readonly.
<6>Freeing init memory: 84K
<1>[SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS1) Setup!!!
<1>[SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
<1>[SERIAL INPUT MANAGE] enable_serial : debug(len: 5)
<1>
<1>[29_128M_64_256_nopci] Linux version 2.6.18_SELP-ARM (zoobe2@sp) (gcc version 4.2.0 20070514 (GPL2) (SELP 4.2.0-3.0.5.custom 2007-10-31(14:53))) #90 PREEMPT Mon Jun 22 10:40:07 KST 2009
<4>
<1>================================================================================
<1> SAMSUNG: v2.6.18_SELP_3.X_GA_bayhill+/A1(P24)
<1>         (Detailed Information: /sys/selp/vd/lspinfo/summary)