LA46D550 | Firmware: T-MST4DEUC-1011.0 | WiFi Adapter Hack
Posted: Wed Sep 04, 2013 6:34 am
Ok Details of the TV:
LA46D550K7 (D series Model in New Zealand)
Model Code: LA46D550
Current Version: 2011/03/09_001011
Software Version: T-MST4DEUC-1011.0
This TV is not hacked at all and I am just trying to get internet in the TV through wifi network
I have got a wifi dongle which I have reset the vid:pid in a hardware way. See the lsusb output from my linux computer:
Before:
After:
When I put in this dongle in the USB port, TV recognises it and wifi setup pops up.
My home wifi network is:
SSID Broadcast = on
Security = WPA2 ( I have tried with open and WEP as well)
The wifi router and the TV are in the same room within 10 metres and no obstruction
Problem:
1. The TV scans for network but does not find any
2. I manually put in SSID and Security key, the TV tires to connect and I can see that the MAC address is coming up as 0.0.0.0
3. I have tried the same with OPEN and WEP network as well with same result. TV is not able to get the MAC address from the dongle.
So that is the problem. Any solution for this problem.
Note the computer can get the MAC address from this dongle:
Please note once again this TV is not hacked at all and a newer firmware is available (T-MST4DEUC-1029.0). I would only install it if it has better compatibility with other hacks as detailed in this forum.
LA46D550K7 (D series Model in New Zealand)
Model Code: LA46D550
Current Version: 2011/03/09_001011
Software Version: T-MST4DEUC-1011.0
This TV is not hacked at all and I am just trying to get internet in the TV through wifi network
I have got a wifi dongle which I have reset the vid:pid in a hardware way. See the lsusb output from my linux computer:
Before:
Code: Select all
Bus 001 Device 007: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
Code: Select all
Bus 001 Device 006: ID 04e8:2018 Samsung Electronics Co., Ltd WIS09ABGN LinkStick Wireless LAN Adapter
My home wifi network is:
SSID Broadcast = on
Security = WPA2 ( I have tried with open and WEP as well)
The wifi router and the TV are in the same room within 10 metres and no obstruction
Problem:
1. The TV scans for network but does not find any
2. I manually put in SSID and Security key, the TV tires to connect and I can see that the MAC address is coming up as 0.0.0.0
3. I have tried the same with OPEN and WEP network as well with same result. TV is not able to get the MAC address from the dongle.
So that is the problem. Any solution for this problem.
Note the computer can get the MAC address from this dongle:
Code: Select all
ifconfig -a
wlan1 Link encap:Ethernet HWaddr 00:0d:a3:10:97:e2
UP BROADCAST MULTICAST MTU:1500 Metric:1