I'l give it a test with a official CI+ module this week ...
See what happens or what works
[PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Hey Guys!
I recently switched to Win10 and started PVRD but the GUI is corrupted somehow.
Is it in general not compatile to Win10? Or does anyone have a glue whats going on here?
The general functionality seams to work but Buttons and other things are not visible or....
See screenshot.
I recently switched to Win10 and started PVRD but the GUI is corrupted somehow.
Is it in general not compatile to Win10? Or does anyone have a glue whats going on here?
The general functionality seams to work but Buttons and other things are not visible or....
See screenshot.
You do not have the required permissions to view the files attached to this post.
TV: UE40ES7000 @ UE40ES8090 - T-ECPDEUC-2022.0 // SamyGO
CI+: Unicam EVO 4 with HD+ (HD02) @ Pacific 4.60
NET: Samba: PC
CI+: Unicam EVO 4 with HD+ (HD02) @ Pacific 4.60
NET: Samba: PC
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
No such issue here (just tried on 2 Win10 PCs), looks like some font problem (you used custom one maybe?). Did you upgrade to Win10? If so you should maybe try to delete PVRDecoder reg entry (HKCU\Software\SamyGOPVRDecoder).
I do NOT receive any PM. Please use forum.
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
That was easy! Thx Zoel. After I delete the reg everything is fine!
And yes - Was lazy and did an Win7->Win10 upgrade...
Should learn from this. I noticed some other programs that have some little issues with more strict security and ownership settings of Win10.
Maybe someday an fresh start would be good - But up to now I was suppriesed that this upgrade went almost flawlessly...
TV: UE40ES7000 @ UE40ES8090 - T-ECPDEUC-2022.0 // SamyGO
CI+: Unicam EVO 4 with HD+ (HD02) @ Pacific 4.60
NET: Samba: PC
CI+: Unicam EVO 4 with HD+ (HD02) @ Pacific 4.60
NET: Samba: PC
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
May i switch back to the:
"Unable to retrive xxx.key. No point in continuing copy-process..
Process FAILED somewhere down the road for xxx.srf.
Removing DRMDecrypt from work-folder..
All recordings on USB listed. Waiting for user." Topic?
SamyGo v1.8.2.53 was working fine for month until some weeks ago. During my encoding to HDD, suddenly this message appears. From this time on, I am not able to use that tool anymore. Suddenly....
I read in the forum about "chmod to 7777" via connecting with Telnet on my TV, where SamyGo is installed, but it doesn´t help. I tried to reinstall SamyGo, to have the origin configuration, but it also does not help.
I do not understand what happened here, because i did not change my running system (no Firmware Updates etc.)
Has someone an idea, what I also can try?
Thx
"Unable to retrive xxx.key. No point in continuing copy-process..
Process FAILED somewhere down the road for xxx.srf.
Removing DRMDecrypt from work-folder..
All recordings on USB listed. Waiting for user." Topic?
SamyGo v1.8.2.53 was working fine for month until some weeks ago. During my encoding to HDD, suddenly this message appears. From this time on, I am not able to use that tool anymore. Suddenly....
I read in the forum about "chmod to 7777" via connecting with Telnet on my TV, where SamyGo is installed, but it doesn´t help. I tried to reinstall SamyGo, to have the origin configuration, but it also does not help.
I do not understand what happened here, because i did not change my running system (no Firmware Updates etc.)
Has someone an idea, what I also can try?
Thx
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
I remember, that I had also an issue like that, but not absolutely sure.
Check, if the TV workint tool directory (under Settings -> pahts) is /mtd_rwarea
Changing to this one helped for me.
Check, if the TV workint tool directory (under Settings -> pahts) is /mtd_rwarea
Changing to this one helped for me.
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
same my problem yesterday.motte wrote: ↑Thu Dec 06, 2018 3:14 pm May i switch back to the:
"Unable to retrive xxx.key. No point in continuing copy-process..
Process FAILED somewhere down the road for xxx.srf.
Removing DRMDecrypt from work-folder..
All recordings on USB listed. Waiting for user." Topic?
SamyGo v1.8.2.53 was working fine for month until some weeks ago. During my encoding to HDD, suddenly this message appears. From this time on, I am not able to use that tool anymore. Suddenly....
I read in the forum about "chmod to 7777" via connecting with Telnet on my TV, where SamyGo is installed, but it doesn´t help. I tried to reinstall SamyGo, to have the origin configuration, but it also does not help.
I do not understand what happened here, because i did not change my running system (no Firmware Updates etc.)
Has someone an idea, what I also can try?
Thx
never change my pc system and tvsoftware.
reset tv. but problem continued.
what can I do?
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
EVREKA.
before I delete regedit HKCU\Software\SamyGOPVRDecoder
after I connected tv with filezilla
go to /mtd_rwcommon
I delete ;
libPVRAnyDev
libPVRdumpkeys
libPVRtoTS
libPVRtoTS
PVRDecoder
sam
samyGOso
and my old reserv this files re load.
and problem finish.
sory my language.
before I delete regedit HKCU\Software\SamyGOPVRDecoder
after I connected tv with filezilla
go to /mtd_rwcommon
I delete ;
libPVRAnyDev
libPVRdumpkeys
libPVRtoTS
libPVRtoTS
PVRDecoder
sam
samyGOso
and my old reserv this files re load.
and problem finish.
sory my language.
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
What is this "remoteadmin.netcat.ad" warning i'm getting?
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
To gain tv access PVR decoder uses netcat, wich can be recognized as potential risk by some antivirus software. No worries, nobody wants harm you
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE