PS64E800 LOCAL SE CHANGE ???

[sameerjamal]

Please I have the PS64E8000 how can I change the local set, the rusamsungtvcommunicator didnt worked with the factory and 3speed steps please any other idea.

[juusso]

USE IR method.

[sameerjamal]

USE IR method.

PLEASE CAN YOU TELL ME HOW

[juusso]

You can find info on wiki. http://wiki.samygo.tv/index.php5/Remote ... ransmitter
for more info search forum. I bet you haven`t done that

[sameerjamal]

You can find info on wiki. http://wiki.samygo.tv/index.php5/Remote ... ransmitter
for more info search forum. I bet you haven`t done that

I searched the forum but didn't found the info that I need . is there a way to unlock the local set using the rusamsungtvcommunicator ?

[sameerjamal]

There is a member said he used the 0000 but I didn't understanded it

[sameerjamal]

viewtopic.php?f=48&t=5728&p=41389&hilit=unlock#p41389

[fluffi444]

Do you have an IR Blaster? I think the PS64E8000 has...

Then try this: http://wiki.samygo.tv/index.php5/Change ... n_F_series

This is written for F-Series - But should also work for every ES7000/8000 which came with an IR Blaster.....

[Make73]

There is a member said he used the 0000 but I didn't understanded it

Factory+3Speed combination file didn?t work for me so I played those files separately (from laptop headphones out) and that unlocked lot?s of stuff at service menu (like local area, model, PVR and so on...
Next to the PS64E8000 and same situation, Factory 3Speed works and unlock things like Advanced at main menu, model change etc. ..but Expert still grayed/locked...
Out of the box I set up TV with EU local setting and everything else worked fine but cable tuner tuned channels to wrong order. So I changed local from EU to Nordic and model from 8000 to 8005, after that factory reset and now it tuned channels just correct...

Don?t know about IR blaster but that IR-transmitter worked just fine with PS64E8000 (EU) to PS64E8005 (Nordic) local change.
Those "0000" was trying to unlock Expert mode for CAL-DAY and CAL-NIGHT modes but that?s not possible with European models that is confirmed by Samsung itself.

[televeyes]

I recently witnessed successful unlocking of the Locale and Info Link options in the Service Menu of a French Samsung TV model UE32ES6710SXZF (i.e. an E-Series ES6710), using a Samsung Galaxy S4 mobile phone's IR Blaster (infra-red LED) to send the relevant factory remote control key codes. Full details are at viewtopic.php?f=52&t=4109&p=52952#p52952. N.B. The ruSamsungTVCommunicator Windows application was tried previously, and while it connected to the TV and could be used to send remote control key sequences, it appears that this model of TV/its firmware did not accept Factory and 3Speed codes via the network remote.