SamyGO

Posted: **Thu Oct 24, 2013 6:14 am**

I'm having issues with netflix loading after starting 03_03_sshd.init. It appears to be related to Secure Storage.

When looking at "About Smart Hub" I see "Netflix ESN : Not Supported".

Debugging during system start

SpoilerShow

Code: Select all

=================================
onboot (Apr 20 2012 - 19:48:09)
release ver : 1005  - RELEASE
L1 cache : on
etc : lvds data on
=================================

Onboot X10p Sync mode
LCD FastLogo Run...
Panel Init ... 240Hz model done NEC I2C Write Error addr = 0x0006 !!!!

boot partition selection : 1
Loading 2nd Partition Kernel....
Loading Kernel....
load kernel size : 3224708 byte
UART1 is used to debug mode. 
 
auth success by h/w sha1 
Jump Kernel....
[VDLP] preset_lpj manual set to 3588096
[VDLP] preset_lpj manual set to 3588096
================================================================================
 SAMSUNG VDLP Kernel
 Version : 0064, release
 Applied Last Patch Number : 0716, DTV, X10P, release, AUS_BRANCH
================================================================================
starting pid 27, tty '': '/etc/rc.local'
/etc/rc.local start
=====================================================================
  ROOTFS VERSION : "X10P 0071" KERNEL MODULE VERSION : "0064.0716, DTV, X10P, release, AUS_BRANCH"
=====##### send signal from USER, SIG : 0, init(1)->???(27) sys_kill
================================================================
starting pid 36, tty '': '/bin/cttyhack -/bin/sh'
/etc/profile start
rfs_glue mod ld
rfs_fat mod ld
2nd partition
2nd Partition is selected
mount mtd_exe
mount mtd_rwarea
Cgroup Success
[1]+  Done                       /etc/cgroup_init
mount mtd_drmregion_a
mount mtd_drmregion_b
Partition.txt doesn't exist
mount mtd_appext
mount mtd_rocommon
== Start exeDSP ==
/mtd_exe/rc.local start !!!!!
"X10P 0071" KERNEL MODULE VERSION : "0064.0716, DTV, X10P, release, AUS_BRANCH" 
samsung_mali mod ld
samsung_mstar mod ld
/mtd_exe/rc.local: line 20: can't create /proc/sys/net/ipv4/conf/eth0/force_igmp_version: nonexistent directory
Run FastLogo...
mknod: /dev/tty0: File exists
mknod: /dev/tty1: File exists
mknod: /dev/tty2: File exists
mknod: /dev/tty3: File exists
FastLogo mod ld
mallopt(M_MMAP_THRESHOLD) success!
##### System Execution!!! #####  [2024]

You see the second partition is being used.
Maybe partition 1 is corrupt?
How to verify?
If not it there away to switch back to first partition?

Then this comes up after several seconds later but still in boot process

Code: Select all

[AP_INFOLINK/Fatal] 411 : [CExternalWidgetInterface::GetESN(958)] Read WV key data from secure storage failed.

Debugging Netflix with exlink

SpoilerShow

Code: Select all

SSL_library_init] already intialized...
-_-_-_-_- USING PSA Module -_-_-_-_-  DeviceLibNative.cpp  [NRDP2.1 PSA] get ESN failure. Reason : SS Read
[NRDP2.1 PSA] get Kpe failure
[NRDP2.1 PSA] get Kph failure
[DPI_DEBUG] BufferManagerNative [BufferManagerNative][129] : AUDIO_POOL_SIZE : 1048576,  VIDEO_POOL_SIZE: 16777216 
[DPI_DEBUG] BufferManagerNative [BufferManagerNative][129] : AUDIO_POOL_SIZE : 1048576,  VIDEO_POOL_SIZE: 16777216 
[FLASH_PLAYER/Fatal] 650 : @@@@@@  GC was not NULL...
Adobe (R) AIR (R) 2.5 for TV
(C) 2008-2010. Adobe Systems Incorporated. All rights reserved.
Patent and legal notices: http://www.adobe.com/go/digitalhome_thirdpartynotice
Using: Adobe(R) Flash(R) Player 10 (10,1,82,76)
1970-01-01 00:07:09 0x7ec95450 NCCP: Unable to encrypt payload for nccp request, leaving empty
[Smart Hub Debug(1)] XHRObject.timer cleared
    >>"/mtd_cmmlib/stagecraft20/NetflixFonts/Arial_for_Netflix-R.ttf" file is successfully opened for [Size:20][B:0][I:0]!! [line 429]
[Smart Hub Debug(1)] XHRObject.xhrTimer set
FontPath from GetContext : /mtd_rocommon/Font/shadow_us.ttf
>>Start  Netflix_Curl_Multi_Thread
enable 1
1970-01-01 00:07:10 0x7cca6450 UIBOOT_CACHE: Got curl error 77 error setting certificate verify locations:
	  CAfile: /mtd_down/widgets/normal/11101200001/data/etc/cert/ui_ca.pem
	  CApath: none
got a message for result 77 status 0
    >>"/mtd_cmmlib/stagecraft20/NetflixFonts/Arial_for_Netflix-B.ttf" file is successfully opened for [Size:24][B:1][I:0]!! [line 435]
    >>"/mtd_cmmlib/stagecraft20/NetflixFonts/Arial_for_Netflix-R.ttf" file is successfully opened for [Size:28][B:0][I:0]!! [line 429]

TDM debugging options

SpoilerShow

Code: Select all

====================================
      [ TOP Debug Menu]   
------------------------------------
  1  : SubSystem Print On/Off    
  2  : Platform Print Setting    
  3  : TD Print Setting    
  4  : Performance Print Setting    
  5  : Sdal Print Setting    
  6  : Sdal Trace Setting    
  11 : TD Debug
  12 : SubSystem DBG 
  13 : SubSystem Info Print
  21 : Louvre Print Setting 
------------------------------------
  70 : Jade Debug
  80 : PVR Debug
  81 : CSP debug
====================================
  99 : Exit 
====================================
DBG> 2
====================================
      [ TOP Debug Menu]   
------------------------------------
  1  : SubSystem Print On/Off    
  2  : Platform Print Setting    
  3  : TD Print Setting    
  4  : Performance Print Setting    
  5  : Sdal Print Setting    
  6  : Sdal Trace Setting    
  11 : TD Debug
  12 : SubSystem DBG 
  13 : SubSystem Info Print
  21 : Louvre Print Setting 
------------------------------------
  70 : Jade Debug
  80 : PVR Debug
  81 : CSP debug
====================================
  99 : Exit 
====================================
DBG> : Input Start Level << : 0
Input End Level << : 0

====================================
     [Platform Debug List]
------------------------------------
  1. Basic Platform
  2. Advanced Platform
  3. Java
  4. Pharos
  5. Met Platform
  6. Shadow
------------------------------------
  99 : Exit
====================================
cmd> 2

====================================
     [Platform Debug List]
------------------------------------
  1 : CBRE Debug
  2 : USB HID Input Debug
  3 : DeviceManager Debug
  4 : NetworkSetup Debug
  5 : ContentsManager Debug
  6 : MediaConnect
  7 : Uniplayer Debug
  8 : BluetoothApp Debug
  9 : NetworkManager Debug
  10 : CherrySS Debug
  11 : InfoLink Debug
  12 : FullBrowser Debug
  13 : CMMLoginApp Debug
  14 : MultiMedia Debug
  15 : MMPlayer Debug
  16 : MovieDemoApp Debug
  17 : CMPDivxApp Debug
  18 : CEC Debug
  19 : PSA Debug
  20 : FlashApps Debug
  21 : SWU Core
  22 : Cloning Debug
  23 : RM Debug
  24 : DMR Debug
  25 : HNC Debug
  26 : RVU Debug
  27 : WebServer Debug
  28 : RAStackApp Debug
  29 : WidgetEngine Debug
  30 : DualTV Debug
  31 : SEF Debug
  32 : HAS Debug
  33 : MoIPHD Debug
  34 : Map Debug
  35 : DMRCore Debug
------------------------------------
  99 : Exit
====================================
cmd> 19

====================================
     [PSA Debug Module]
------------------------------------
  1 : [OFF] AP_PSA	  2 : [OFF] AP_PSA_WBCIPHER	  3 : [OFF] AP_PSAFKP	
  6 : [OFF] AP_PSADTCP	  7 : [OFF] AP_PSA_CRYPTO	  8 : [OFF] AP_PSA_PLAYREADY	
 10 : [OFF] AP_PSASMLU	 12 : [OFF] AP_PSAUEP	 13 : [OFF] AP_PSA_ANALYZER	
 14 : [OFF] AP_PSA_MARLIN	 15 : [OFF] AP_PSA_CAS	
====================================
 Debug Level = Fatal
====================================
 80 : All OFF
 81 : All ON
 82 : PMS ON/OFF
 85 : Set Debug Level
====================================
 [PSA Print Sub Debug] 
 17. Print Sub Menu 
====================================
 [PSA WhiteBox Debug] 
 21 : AES test 
 22 : AES auto test
 23 : RSA test 
 24 : RSA auto test (512, 1024, 2048)
====================================
 [PSA FKP Debug] 
 25 : FKP Debug 
====================================
 [PSA CAS Debug]
 26 : Debug 1 
 27 : Debug 2 
 28 : Debug 3 
 29 : Debug 4 
====================================
 [PSA SMLU Debug] 
 31 : SMLU Debug 
====================================
 [PSA UEP Debug] 
 32 : UEP Debug 
====================================
 [PSA Crypto Debug] 
 40 : Encrypt & Decrypt 10 times (Single thread) (randomly)
 41 : Encrypt & Decrypt 10 times (Dual thread) (randomly)
 42 : Encrypt & Decrypt user-defined (0:inifinite) times (randomly, multi-threaded)
====================================
 [PSA DTCP Debug] 
 60 : Write Key to SS(Without EEPROM) from file
 61 : Read Key from Secure Storage
 62 : [GENOAS ONLY] Write Key to EEPROM(&SS) from file
 63 : Write Key to SS(Without EEPROM) from FKP
====================================
 [PlayReady Debug] 
 65 : TestPlayReady 
 66 : JoinDomain 
 67 : LeaveDomain 
 68 : Set PlayReady Debug Level to Info2
 69 : Set PlayReady Debug Level to Error
====================================
 [PSA Key package installation Debug] 
 72 : Remove installation success marker 
 73 : Remove all installation markers 
 74 : Clear Secure Storage 
 75 : Install package(s) 
====================================
 [Secure Storage Debug] 
 76 : SSv2MultithreadingTestStart or SSv2 MInterface test 
 77 : Write/Read TestSSv1_0
 78 : RemoveSSv1_0
 79 : CleareStorage1_0
====================================
 [Marlin Debug] 
 86 : [SURC] MarlinBB library test
 87 : [SURC] MS3 library test, READ_KEY
 88 : [HQ] BB Test, WRITE_FIXED_KEY
 89 : [HQ] MS3 Test, FIELD_KEY
====================================
 [PSA Analyzer Debug] 
 90 : Mount Default target /tmp 
 91 : Analyzer TC 
 92 : Analyzer Looping TC
 93 : Reserved 
 94 : Reserved 
====================================
 [PSA Print Duid] 
 95. Print Duid  
 96. Print Duid (multi-thread) 
====================================
 [PSA Print FactoryMode DRM] 
 97. Print FactoryMode DRM  
====================================
 99 : Exit
====================================
cmd> Look free text

I've preformed Factory reset though service menu; eeprom reset from here; deleted and reinstalled Netflix and reset Smart Hub through service menu.

Any suggestions?

Posted: **Thu Oct 24, 2013 7:35 am**

diasable sshd script, use telnet.

Posted: **Thu Oct 24, 2013 2:31 pm**

Sorry, I didn't explain my self well enough.

sshd is disabled, has never been enabled, except for one time when I tried to enable it.

During that one time occurrence /etc/profile was run.

I'm thinking the first partition became corrupted and damaged the secure storage area. But I don't know for sure.

Everything else works perfectly.

I have ordered a new main board and I'm gonna use the old board for testing.

Posted: **Sat Sep 20, 2014 1:43 am**

I have the same problem as described here,

Code: Select all

/home5/shlee/X10P_MP/Comp/AP_InfoLink/UTIL/NRDP3/Src/app/nbp/NBPConfiguration.cpp-init-250
[SSL_library_init] already intialized...
-_-_-_-_- USING PSA Module -_-_-_-_-  DeviceLibNative.cpp  [NRDP2.1 PSA] get ESN failure. Reason : SS Read
[NRDP2.1 PSA] get Kpe failure
[NRDP2.1 PSA] get Kph failure
...
[31m2014-09-19 05:45:11 0x8aa7a450 NCCP: Unable to encrypt payload for nccp request, leaving empty

Posted: **Mon Oct 06, 2014 12:44 am**

I was not able to figure it out. This is the second time it happened to me. First time I was able to get the board replaced under warranty. Second time was out of warranty. I put another board in the TV to keep the wife happy. So now I have a spare board that does not have Netflix (only problem). I'm willing to do any testing on it if anyone has a good idea.

SamyGO

Secure Storage

Secure Storage

Re: Secure Storage

Re: Secure Storage

Re: Secure Storage

Re: Secure Storage