SamyGO

I state that I own samsung tv 32ud6100 with firmware version 1023

I ran the following instructions wiki :
Create the developer account


1 . Enter SmartHub ( smartHUB by pressing the button on the remote)
2 . After loading the widget , go to Settings (D or blue)
3 . Press "Create an Account "
4 . Enter the name : develop and password (any)
5 . Exit and reboot TV SmartHub

NB ! If you can ` t create account (option is greyed out)
Then go direct to Login ( red or A) and enter:

user : develop
password : 111111 (or any other six digits as password)

Installing hack

1 . Start SmartHub
2 . Go to Login ( or red (A) )
3 . Go to Settings ( or blue (D) ) -> Development - > Setting Server IP
4 . Enter this IP :
Develop ip.png

5 . Press User Application Synchronization
Wait until TV installs widget ( SamyGO Extensions) ...
Could take a while, depends from your internet speed . Wait until TV says "done"

NB ! All your other widgets , installed from local server before were deleted !

6 . Exit developer menu , exit SmartHub .

7 . Return to SmartHub and here you will find new SamyGO widget . Execute it .

But when I go to activate it with the remote control widget from SamyGO SmartHub screen goes dark for 2 seconds and nothing happens.
Tips ?

your firmware is too recent.

and what should I do?

nothing... use hospitality mode hack or don't use samygo.

optional you can try to do downgrade using dns trick. Check wiki and forums first.

hospitality mode without hacks to downgrade the firmware works with 1023?

yes. i will.