[solved] Cleared EEPROM on ES -- now can't recover
Posted: Thu Feb 13, 2014 11:36 am
I have an ES6200 and I screwed up big time ? in a telnet session I ran the X10 eeprom utility with the wrong parameter and rather than dumping the current eeprom i cleared it instead.
Powered on and it asked me to set my panel, front panel, tuner, etc. No problem, launch service mode ? change those settings and ? its still not happy and complains about those 3 things on boot. Picture seems fine on the test patterns+menus, but the countries are wrong in the tuner, etc. Ethernet doesn't work (has ffffffffffff for MAC) but wifi works.
I suspect it?s because Local Set is none, Svc Model is 0 etc. Unfortunately...I can't un-grey them:
- Sending FACTORY+3SPEED (or double 3SPEED) in ruSTVC over the network doesn't work anymore
- Sending them physically via IR isn't working using Pronto codes on an HTC One (Standard keys were definitely working)
- Trying to send factory or 3speed in TDM through SsKeyInputDebug sending 59/60 actually exits the service menu and displays the model etc. in red.
- Option 10 isn't in the TDM anymore so I can't access it that way
- I can't even install SamyGO in a fit of desperation -- can't grab Skype through Smarthub, and the develop/custom DNS method just installs 'Broken TV' app
- And I can't do anything in system shell because it's filtered to hex.
Is there *anything* to do besides bite the bullet and call Samsung?
Powered on and it asked me to set my panel, front panel, tuner, etc. No problem, launch service mode ? change those settings and ? its still not happy and complains about those 3 things on boot. Picture seems fine on the test patterns+menus, but the countries are wrong in the tuner, etc. Ethernet doesn't work (has ffffffffffff for MAC) but wifi works.
I suspect it?s because Local Set is none, Svc Model is 0 etc. Unfortunately...I can't un-grey them:
- Sending FACTORY+3SPEED (or double 3SPEED) in ruSTVC over the network doesn't work anymore
- Sending them physically via IR isn't working using Pronto codes on an HTC One (Standard keys were definitely working)
- Trying to send factory or 3speed in TDM through SsKeyInputDebug sending 59/60 actually exits the service menu and displays the model etc. in red.
- Option 10 isn't in the TDM anymore so I can't access it that way
- I can't even install SamyGO in a fit of desperation -- can't grab Skype through Smarthub, and the develop/custom DNS method just installs 'Broken TV' app
- And I can't do anything in system shell because it's filtered to hex.
Is there *anything* to do besides bite the bullet and call Samsung?
