[App] SamyGO RCremap for C/D(arm)/E/F/H with CMD support
Re: [App] SamyGO RCremap for C/D(arm)/E/F/H with CMD support
Thank you for this app.It saved my remote control from going to trash, I lost the right arrow key and navigation was a pain.
Re: [App] SamyGO RCremap for C/D(arm)/E/F/H with CMD support
Ability to work with a touch(Bluetooth) remote controller?
Re: [App] SamyGO RCremap for C/D(arm)/E/F/H with CMD support
Why ?exe32 wrote:Ability to work with a touch(Bluetooth) remote controller?
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Re: [App] SamyGO RCremap for C/D(arm)/E/F/H with CMD support
To be able to install the script on the button (to select a menu item). In this remote
http://m.protoria.ua/res/img/pic/IMG_6152.jpg
http://m.protoria.ua/res/img/pic/IMG_6152.jpg
Re: [App] SamyGO RCremap for C/D(arm)/E/F/H with CMD support
For me, the lib is currently functioning not correctly.
I sometimes have problems that the TV does not proceed correctly.
That's why I created the following:
libRCremap.config:
_shutdown.sh
As I can now understand the notes _shutdown.log, the script when switching off is not called. Manual can I start the script.
According RCRemap.log but everything should be fine.
RCRemap.log
Any Idea why the lib not working? I test the same RCRemap.config with change VOLUP and VOLDOWN, it works. Only the CMD not work.
I sometimes have problems that the TV does not proceed correctly.
That's why I created the following:
libRCremap.config:
Code: Select all
[
{
"KEY_VOLUP": "KEY_VOLUP"
},
{
"KEY_POWEROFF": "CMD:/mnt/opt/privateer/usr/bin/_shutdown.sh"
},
{
"KEY_VOLDOWN": "KEY_VOLDOWN"
}
]
Code: Select all
#!/bin/sh
[ $(pidof ${0##*/}) ] 2>/dev/null || exit 0
rm /mnt/opt/privateer/usr/bin/_shutdown.log;
touch /mnt/opt/privateer/usr/bin/_shutdown.log;
/mnt/etc/init.d/07_11_ntpclient.init.dis start;
/sbin/micom shutdown | date >> /mnt/opt/privateer/usr/bin/_shutdown.log
According RCRemap.log but everything should be fine.
RCRemap.log
Code: Select all
[RCremap] SamyGO RCremap v0.3.5 log - (c) bugficks 2013, small fixes by sectroyer 2014
[RCremap] mapping key: 'KEY_VOLUP' to 'KEY_VOLUP'
[RCremap] mapping key: 'KEY_POWEROFF' to command: '/mnt/opt/privateer/usr/bin/_shutdown.sh'
[RCremap] mapping key: 'KEY_VOLDOWN' to 'KEY_VOLDOWN'
[RCremap] 1 _ZN9KeyCommon17SendKeyPressInputEiis [0x962620].
[RCremap] init done...
UExxF4570 FW: T-MST12DEUC-1119.0
UEExxS6300 FW: T-MST10PDEUC-1042.0
UExxK5579 FW: T-HKMFKDEUC-1168.2
GUxxTU8079 FW: T-NKLDEUC-2200.9
UEExxS6300 FW: T-MST10PDEUC-1042.0
UExxK5579 FW: T-HKMFKDEUC-1168.2
GUxxTU8079 FW: T-NKLDEUC-2200.9
- beatfreak
- SamyGO Project Donor
- Posts: 591
- Joined: Tue Aug 23, 2011 9:03 am
- Location: Hamburg
- Contact:
Re: [App] SamyGO RCremap for C/D(arm)/E/F/H with CMD support
tested and working without problems on T-VALDEUC 3011 (UE40C6500)
RCremap.log:
if LibLOGrcKey could be ported to C-Series too i'd like to throw all 255 possible IR-signals to my TV (using LIRC) , this should give the complete IRtoKey mapping
Code: Select all
# cat /mtd_rwcommon/SamyGO/opt/privateer/usr/libso/libRCremap.config
[
{
"KEY_RED": "KEY_RED"
},
{
"KEY_YELLOW": "CMD:/mtd_rwcommon/SamyGO/etc/init.d/02_10_wakelan.init.dis start"
}
]
#
SpoilerShow
Code: Select all
# cat /dtv/RCremap.log
[RCremap] SamyGO RCremap v0.3.5 log - (c) bugficks 2013, small fixes by sectroyer 2014
[RCremap] mapping key: 'KEY_RED' to 'KEY_RED'
[RCremap] mapping key: 'KEY_YELLOW' to command: '/mtd_rwcommon/SamyGO/etc/init.d/02_10_wakelan.init.dis start'
[RCremap] Trying to get _ZN9KeyCommon17SendKeyPressInputEiis on C.
[RCremap] Found _ZN9TDBuilder8GetTDiCPE16TDSourceObject_k location at: 0x002dd460
[RCremap] Found _fini location at: 0x01aacb24
[RCremap] text range: @0x0025d460 -> @0x0020d460
[RCremap] rodata range: @0x01aacb24 -> @0x0a2acb24
[RCremap] Found SendKeyPressInput at @0x0024546c
[RCremap] SendKeyPressInput address: 0x0024546c
[RCremap] _ZN9KeyCommon17SendKeyPressInputEiis address: 0x00245330
[RCremap] 1 _ZN9KeyCommon17SendKeyPressInputEiis [0x245330].
[RCremap] init done...
#
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with
If you can't fix it using dvct tape, you are not using enough dvct tape.
FYI: you can close your ssh session with SamyGO with
Code: Select all
~.
Re: [App] SamyGO RCremap for C/D(arm)/E/F/H with CMD support
Well, makes sense C lib works on C whereas not-C doesn't
Not random that I didn't port LogRCkey to C (as well as most libs I did), just that "finding symbols" is pain in the ass boring stuff, not reliable moreover (sectroyer inside )
Suggested:
-Use firmware 0000 where all symbols are there, LogRCkey will work in state, out of the box.
or
-RCremap logs (mapped) keypresses IIRC, you still can remap all keys to theirselves (at least the ones you really need), then you get expected log
Not random that I didn't port LogRCkey to C (as well as most libs I did), just that "finding symbols" is pain in the ass boring stuff, not reliable moreover (sectroyer inside )
Suggested:
-Use firmware 0000 where all symbols are there, LogRCkey will work in state, out of the box.
or
-RCremap logs (mapped) keypresses IIRC, you still can remap all keys to theirselves (at least the ones you really need), then you get expected log
I do NOT receive any PM. Please use forum.
- beatfreak
- SamyGO Project Donor
- Posts: 591
- Joined: Tue Aug 23, 2011 9:03 am
- Location: Hamburg
- Contact:
Re: [App] SamyGO RCremap for C/D(arm)/E/F/H with CMD support
Well as my plan is to test all the keys it will be a quite big config, and i assume i'll have to call RCremap with -d parameter for debug mode
EDIT: samyGOso ist set to inject RCremap with -d parameter (added at the end), but i dont see any additional logfile, RCremap.log was present before to but it doesnt contain additional info on pressed buttons
P.S. has anyone tried to launch the injection earlier in the boot process?
Last edited by beatfreak on Tue Aug 22, 2017 2:08 pm, edited 1 time in total.
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with
If you can't fix it using dvct tape, you are not using enough dvct tape.
FYI: you can close your ssh session with SamyGO with
Code: Select all
~.
Re: [App] SamyGO RCremap for C/D(arm)/E/F/H with CMD support
"big config" can be quickly done by smart parsing keylist, the question is more if a big enough "array" is intended in sourcecode
Only time for you to realize not even a third of keycodes are really in use anyway
I don't think -d will help, it never helped nobody because nobody knows what it tells :p
Only time for you to realize not even a third of keycodes are really in use anyway
I don't think -d will help, it never helped nobody because nobody knows what it tells :p
I do NOT receive any PM. Please use forum.
- beatfreak
- SamyGO Project Donor
- Posts: 591
- Joined: Tue Aug 23, 2011 9:03 am
- Location: Hamburg
- Contact:
Re: [App] SamyGO RCremap for C/D(arm)/E/F/H with CMD support
Thats what i am curious about, atm i have 73 IR codes and their respective button captions but no accurate mapping to keycodes
oh, and a big thank you for this patch and especially for "surprise", now i never need to get up from the couch again XD
Last edited by beatfreak on Fri Oct 27, 2017 5:57 pm, edited 1 time in total.
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with
If you can't fix it using dvct tape, you are not using enough dvct tape.
FYI: you can close your ssh session with SamyGO with
Code: Select all
~.