SamyGO

Hi there,

i'm Nicole and I bought a Samsung ES8090.
Unfortunately, Samsung has released a new firmware on the device.

Now I can not use SamyGo.

Is there a solution again an older firmware on my Samsung to install?

Please Help me.

Thanks to all

You should be able to downgrade using firmware 0000:
viewtopic.php?f=50&t=7544

Thank you for your quick response.

And how do I do that exactly?

The file T-ECPDEUC_SECUSB_0000 unzip download on the USB stick.

What is next?

I want to make a mistake.

Thanks a lot

It's explained in the post I linked:
Unzip T-ECPDEUC_SECUSB_0000.zip to root of a pendrive, plug it to TV and go through update menu of TV to update by USB.
Then repeat procedure with one of the "old" firmwares provided (2006/2009.2)

Finally don't forget to disable automatic updates to avoid future ones

Thank you for your Help.

I will test it right away.
Can you tell me please still tell exactly what Firmware I can Play on the Samsung UE 55 ES 8090?

Are you a link to the new Firmware?

I want to make a mistake and destroy the Device.

Thanks again

After installing 0000, upgrade again to one of the 2 others (2006 or 2009.2) which are in the same MEGA folder I linked
Almost no risk to destroy any device...

On my TV the Version 002009 is installed.

Would this Version work?
Or is that a bad Version?

Thanks a lot

Usually there are not much real differences between firmwares.
Maybe a ES7000/8000 owner would advise better than me...
Let's say first try 2006 and if you're not happy with it you'll still be able to upgrade to 2009.2

Nicole wrote:On my TV the Version 002009 is installed.

Would this Version work?
Or is that a bad Version?

Thanks a lot

Not sure but I think SamyGO should work on this firmware version, did you try to reinstall it?
Anyway, if not, just downgrade to 2006 as explained (and reinstall SamyGO if needed)

I've never done before perhaps the problem lies also in me.

I have Skype already installed.
What version of SamyGo should I install?

I have taken a version of 2013 that may be the error?

Do you have a link to the current version?

Thank you again